Scribd
Upload
67 views

First Unit

engineering mechanics rigid bodies objective qp

Uploaded by

Mohan Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
67 views

First Unit

engineering mechanics rigid bodies objective qp

Uploaded by

Mohan Kumar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Engineering Mechanics

Unit-1 Question

1. Find the force P applied to the system shown Figure 1.

a) 50.4 N b) 45.5 N c) 40.4 N d)100 N e)124 N

2. A spherical ball of weight 100 N and diameter 300 mm is held against a vertical
wall by a 200 mm long wire AB. Find tension of the wire and reaction force

a) T=255 N and Reaction at wall 175 N b) T=125 N and Reaction at wall 75


N c) T=145 N and Reaction at wall 155 N d) T=455 N and Reaction at
wall 95 N e) T=145 N and Reaction at wall 175 N

3. A Cable is attached at two ends as shown in figure. A 100 kg weight is attached


at B and roller at D, DE is another cable parallel to cable BC. P is a force applied
at E. find tension in the cable ABC and force P.
a) P = 120 N and T=730 N b) P=860N and T=930 N c) P = 930N and T=160
N d) P = 160N and T = 930 N e) P=120N and T=250 N

4. 4 N and 5 N are the two forces acting perpendicular to each other. Find the
resultant force.
a) 9 N b) 45.5 N c) √41 N d) √51 N e) 64 N

5. If four forces are not meeting each other in spatial direction, is there any
resultant force?
a) There is a resultant force b) no resultant force c) resultant force is zero d)
the force system does not exist e) resultant force is infinity

6. A 1kN inclined force with respect to x-axis acting upwards at points (2m, 3m).
Find the moment of the force about the origin
a) 0.707 kN m b) -0.707 kN m c) -1.414 kN m d) 1.414 kN m e) 1.8 N

7. Find the resultant for the lever shown below.

a) 1863.7 N b) 173.7 N c) 2363.7 N d) 1363.7 N e) 1003.7 N

8. If all the forces in beams are vertical, then what is the equilibrium conditions?
a) ∑Fy = 0, ∑𝑀0 = 0, b) ∑Fy ≠ 0, ∑𝑀0 = 0, c) ∑Fy = 0, ∑𝑀0 ≠ 0,
d) ∑Fx = 0, ∑𝑀0 = 0, e) ∑Fz = 0, ∑𝑀0 = 0
9. P and Q (P > Q) are the two forces, acting along straight line in opposite
direction, the resultant force will be
a) P/Q b) Q-P c) PQ d) P+Q e) P-Q

10. Find the tension in rope AB from the figure shown below. Weight of the roller
is W=750 N.

a) 513 N b) 315 N c) 750 N d) 225 N e) 154 N

You might also like