Scribd
Upload
229 views

Triangular Wave Generator Using Op Amp - EEEGUIDE

A triangular wave generator can be created using an op-amp integrator circuit and a square wave input. The square wave input alternatively charges and discharges a capacitor through the integrator, creating a triangular wave output. Another method uses a comparator and integrator, where the comparator outputs a square wave that charges and discharges the integrator's capacitor, generating a triangular wave. The frequency and amplitude of the triangular wave can be calculated based on the circuit components and voltages.

Uploaded by

fauzan Waseem
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
229 views

Triangular Wave Generator Using Op Amp - EEEGUIDE

A triangular wave generator can be created using an op-amp integrator circuit and a square wave input. The square wave input alternatively charges and discharges a capacitor through the integrator, creating a triangular wave output. Another method uses a comparator and integrator, where the comparator outputs a square wave that charges and discharges the integrator's capacitor, generating a triangular wave. The frequency and amplitude of the triangular wave can be calculated based on the circuit components and voltages.

Uploaded by

fauzan Waseem
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 6

09/10/2019 Triangular Wave Generator Using Op amp | EEEGUIDE

Triangular Wave Generator Using Op amp


INTEGRATED CIRCUITS, LINEAR INTEGRATED CIRCUITS

Triangular Wave Generator Using Op amp:


We have seen that, the output of integrator is a Triangular Wave Generator Using Op amp if
its input is a square wave. This means that a Triangular Wave Generator Using Op amp can
be formed by simply connecting an integrator to the square wave generator as shown in the
Fig. 2.85.

https://www.eeeguide.com/triangular-wave-generator-using-op-amp/ 1/6
09/10/2019 Triangular Wave Generator Using Op amp | EEEGUIDE

Basically, triangular wave is generated by alternatively charging and discharging a capacitor


with a constant current. This is achieved by connecting integrator circuit at the output of
square wave generator. Assume that V’ is high at +Vsat. This forces a constant current
(+Vsat/R3) through C (left to right) to drive Vo negative linearly. When V’ is low at —Vsat, it
forces a constant current (— Vsat /R3) through C (right to left) to drive Vo positive, linearly.
The frequency of the triangular wave is same as that of square wave. This is illustrated
in Fig. 2.86. Although the amplitude of the square wave is constant (± Vsat), the amplitude
of the triangular wave decreases with an increase in its frequency, and vice versa. This is
because the reactance of capacitor decreases at high frequencies and increases at low
frequencies.

In practical circuits, resistance R4 is connected across C to avoid the saturation problem at


low frequencies as in the case of practical integrator as shown in the Fig. 2.87.

https://www.eeeguide.com/triangular-wave-generator-using-op-amp/ 2/6
09/10/2019 Triangular Wave Generator Using Op amp | EEEGUIDE

To obtain stable triangular wave at the output, it is necessary to have 5R3 C2 > T/2, where T
is the period of the square wave input.

Another triangular wave generator, which requires fewer components, is shown in the Fig.
2.88.

https://www.eeeguide.com/triangular-wave-generator-using-op-amp/ 3/6
09/10/2019 Triangular Wave Generator Using Op amp | EEEGUIDE

It consists of a comparator (A) and an integrator (B). The output of comparator A is a square
wave of amplitude ± Vsat and is applied to the inverting (—) input terminal of the integrator
B. The output of integrator is a triangular wave and it is feedback as input to the comparator
A through a voltage divider R2 R3.

To understand circuit operation, assume that the output of comparator A is at + Vsat . This
forces a constant c trrent +Vsat I ) through C to give a negative going ramp at the output of
the integra r, as shown in the Fig. 2.88. Therefore, one end of voltage divider is at a voltage
+Vsat and the other at the negative going ramp. When the negative going ramp reaches a
certain value — Vramp, the effective voltage at point

As a result, the output of comparator A switches from positive saturation to negative


saturation (— Vsat). This forces a reverse constant current (right to left) through C to give a
positive going ramp at the output of the integrator, as shown in the Fig. 2.89. When positive
going ramp reaches + Vramp, the effective voltage at point p becomes slightly above OV. As
a result, the output of comparator A switches from negative saturation to positive saturation
(+Vsat ). The sequence then repeats to give triangular wave at the output of integrator B.

Amplitude and Frequency Calculations


The frequency and amplitude of the Triangular Wave Generator Using Op amp wave can be
determined as follows :

When comparator output is at +Vsat , the effective voltage at point P is given by

When effective voltage at P becomes equal to zero, we can write above equation

https://www.eeeguide.com/triangular-wave-generator-using-op-amp/ 4/6
09/10/2019 Triangular Wave Generator Using Op amp | EEEGUIDE

Similarly, when comparator output is at – Vsat, we can write,

The peak to peak amplitude of the triangular wave can be given as

The time taken by the output to swing from – Vramp to + Vramp (or from + Vramp to – Vramp
) is equal to half the time period T/2. Refer Fig. 2.89. This time can be calculated from the
integrator output equation as follows :

Substituting value of Vo(pp) we get,

Therefore, the frequency of oscillation can be given as,

https://www.eeeguide.com/triangular-wave-generator-using-op-amp/ 5/6
09/10/2019 Triangular Wave Generator Using Op amp | EEEGUIDE

https://www.eeeguide.com/triangular-wave-generator-using-op-amp/ 6/6

You might also like