Syllabus for the trade

of

FITTER

(SEMESTER PATTERN)
Under

CRAFTSMAN TRAINING SCHEME

Designed in
2013

By
Government of India
Ministry of Labour & Employment
Directorate General of Employment & Training
CENTRAL STAFF TRAINING AND RESEARCH INSTITUTE
Block - EN - 81 SECTOR – V, SALT LAKE CITY,
KOLKATA – 700 091
 List of members of Trade Committee meeting for the Trade of FITTER Held on 12.08.2010 &
13.08.2010 at CSTARI, Kolkata

SL. NAME AND DESIGNATION REPRESENTING REMARKS

NO. S/SHRI ORGANIZATION
1 S.D.Lahiri, Director C.S.T.A.R.I, Kolkata Chairman
2 S. Bhattacharya, Director W.B.R.E.D.A, Kolkata Member
3 Amarnath Sanyal, Addl, Director I.EM, Kolkata Member
4 R. Gangopadhyay, Lecturer Kanchrapara Railway Workshop, Member
Eastern-Railway
5 R, N. Banerjee, Director Sunshine Power Products, Kolkata Member
6 P. K. Ghosh, Training Manager G.R.S.E. Ltd, Kolkata Member
7 S. K. Pal, Manager M/s Mascot Integrated Industry, Member
Kolkata
8 Dr. Soumen Bose, Dy, Director Directorate of Industrial Training, Member
WB
9 Dibyendu Paul, Lecturer Sahaj Academy, Kolkata Member
10 Dr. Tapas Kr Majumder, Manager B S N L, Kolkata Member
11 S.K.Bose, Manager Trans Bio Energy Ltd, Kolkata Member
12 Monisha Sarkar, Asstt Manager Trans Bio Energy Ltd, Kolkata Member
13 Dr.K. mukhopadhya, Director AGNI, Kolkata Member
14 Anupam Bose, Manager Geetanjali Solar, Kolkata Member
15 A Majumder, DE W.B.R.E.D.A, Kolkata Member
16 Joy Chakraborty, DE W.B.R.E.D.A, Kolkata Member
17 Utpal Kr Roy, Supervisor W.B.R.E.D.A, Kolkata Member
18 A.Ghosh, Supervisor W.B.R.E.D.A, Kolkata Member
19 Moloy Kr Mondal, Supervisor W.B.R.E.D.A, Kolkata Member
20 Rudrendu Basu, Asstt. Director W.B.R.E.D.A, Kolkata Member
21 S.K.Biswas, Asstt Director W.B.R.E.D.A, Kolkata Member
22 D.K.Hazra, Spervisor W.B.R.E.D.A, Kolkata Member
23 A.Karmakar, Supervisor W.B.R.E.D.A, Kolkata Member
24 Gautam Banerjee, Manager ESAB India Ltd, Kolkata Member
25 M.K.Saha, Trg Superintendent G.R.S.E. Ltd. Kolkata Member
26 P.Majumder, Chief Consultant Park Chember Housing Development, Member
Kolkata
27 Rabin Debnath, Asstt. Director Directorate of Industrial Training, Member
WB
28 Sib Chandra Pal, Instructor Govt, ITI, Howrah Homes, WB Member
29 D.P.Sarkar, Instructor Govt, ITI, Howrah Homes, WB Member
30 Anil Kumar, Joint Director of Trg C.S.T.A.R.I, Kolkata Member
31 L. K. Mukherjee, Dy.Director of C.S.T.A.R.I, Kolkata Member
Trg
32 A. Nandi, Dy.Director of Trg C.S.T.A.R.I, Kolkata Member
33 N.Nath, Asstt. Director of Trg C.S.T.A.R.I, Kolkata Member
34 P.K.Dutta, Asstt. Director of Trg C.S.T.A.R.I, Kolkata Member
35 S. B. Sarder, Asstt. Director of Trg C.S.T.A.R.I, Kolkata Member
36 R. N. Manna, Trg. Officer C.S.T.A.R.I, Kolkata Member
37 L. M. Pharikhal, Trg-Officer ATI, Kolkata Member
 List of members attended the Workshop to finalize the syllabi of existing CTS into Semester
Pattern held from 6th to 10th May’2013 at CSTARI, Kolkata.

Sl. No. Name & Designation Organisation Remarks

1. R.N. Bandyopadhyaya, Director CSTARI, Kolkata-91 Chairman
2. K. L. Kuli, Joint Director of Training CSTARI, Kolkata-91 Member
3. K. Srinivasa Rao, CSTARI, Kolkata-91 Member
Joint Director of Training
4. L.K. Muhkerjee, CSTARI, Kolkata-91 Member
Deputy Director of Training
5. Ashoke Rarhi, ATI-EPI, Dehradun Member
Deputy Director of Training
6. N. Nath, CSTARI, Kolkata-91 Member
Assistant Director of Training
7. S. Srinivasu, ATI-EPI, Hyderabad-13 Member
Assistant Director of Training
8. Sharanappa, ATI-EPI, Hyderabad-13 Member
Assistant Director of Training
9. Ramakrishne Gowda, FTI, Bangalore Member
Assistant Director of Training
10. Goutam Das Modak, RVTI, Kolkata-91 Member
Assistant Director of Trg./Principal
11. Venketesh. Ch. , Principal Govt. ITI, Dollygunj, Andaman & Member
Nicobar Island
12. A.K. Ghate, Training Officer ATI, Mumbai Member
13. V.B. Zumbre, Training Officer ATI, Mumbai Member
14. P.M. Radhakrishna pillai, CTI, Chennai-32 Member
Training Officer
15. A.Jayaraman, Training officer CTI Chennai-32, Member
16. S. Bandyopadhyay, Training Officer ATI, Kanpur Member
17. Suriya Kumari .K , Training Officer RVTI, Kolkata-91 Member
18. R.K. Bhattacharyya, Training Officer RVTI, Trivandrum Member
19. Vijay Kumar, Training Officer ATI, Ludhiana Member
20. Anil Kumar, Training Officer ATI, Ludhiana Member
21. Sunil M.K. Training Officer ATI, Kolkata Member
22. Devender, Training Officer ATI, Kolkata Member
23. R. N. Manna, Training Officer CSTARI, Kolkata-91 Member
24. Mrs. S. Das, Training Officer CSTARI, Kolkata-91 Member
25. Jyoti Balwani, Training Officer RVTI, Kolkata-91 Member
26. Pragna H. Ravat, Training Officer RVTI, Kolkata-91 Member
27. Sarbojit Neogi, Vocational Instructor RVTI, Kolkata-91 Member
28. Nilotpal Saha, Vocational Instructor I.T.I., Berhampore, Murshidabad, Member
(W.B.)
29. Vijay Kumar, Data Entry Operator RVTI, Kolkata-91 Member
 General Information

1. Name of the Trade : FITTER

2. N.C.O. Code No. : 842.10, 842.15

3. Duration : 2 Years (Four Semesters having duration of six months each)

4. Power norms : 3.51 KW

5. Space norms : 88 Sq.m

6. Entry Qualification : Passed 10th Class Examination.

7. Unit Size (No. of Student) : 16

8a. Instructor’s/Trainer’s Qualification: Degree in Mechanical Engineering from recognized engineering

College /university with one year experience in the relevant field

OR

Diploma in Mechanical Engineering from recognized board

Of technical education with two years experience in the relevant

OR

10th Class Pass + NTC/NAC in the Trade of “Fitter”

With 3 years post qualification experience in the relevant field.

8b. Desirable qualification : Preference will be given to a candidate with CIC (Craft Instructor
Certificate)

Note: At least one Instructor must have Degree/Diploma in Mechanical Engineering.

 Syllabus for the Trade of “Fitter”
Under Craftsman Training Scheme

First Semester
(Semester Code no. FTR - 01)
Duration : Six Month

Week Trade Practical Trade Theory Engineering Vocational Science

No. Drawing and Calculation
1. Familiarization with the Importance of safety and
Institute, Importance of general precautions observed in
trade training, Machinery the Institute and in the section.
used in the trade, types of Importance of the trade in the
work done by the trainees in development of Industrial
the trade. Introduction to economy of the country. What
safety equipments and their are the related instructions,
uses. Introduction of first subjects to be taught,
aid, Road safety, operation achievement to be made,.
of Electrical mains. recreational, medical
Occupational Safety & facilities and other
Health extracurricular activities of the
Institute. (All necessary
Basic safety introduction, guidance to be provided to the
Personal protection:- new comers to become familiar
Basic injury prevention, with the working of Industrial
Basic first aid, Hazard Training Institute system
identification and including stores procedures.
avoidance, safety signs Introduction of First aid. Road
safety. Operation of electrical
for Danger, Warning,
mains. Introduction of safety
caution & personal safety kits. Presentation by CD or
message. DVD of safety to the newly
Use of Fire extinguishers. admitted trainees so that they
Visit & observation of can know reason of accidents.
sections.

2. Marking out lines, gripping Safety, accident prevention, Engineering Introduction to

suitably in vice jaws, linear measurements- its units, Drawing-- Property and uses
hacksawing to given dividers, calipers, introduction to of C.I. and wrought
dimensions, sawing different hermaphrodite, centre punch, Engg. Iron.
types of metals of different dot punch, their description and Drawing,, its
sections. uses of different types of importance.
hammers. Description, use and
care of ‘V’ Blocks, marking off
table.

3. Filing Channel, Parallel. Bench vice construction, types, Types of lines Arithmetic:
Filing- Flat and square uses, care & maintenance, vice their meaning Fundamental
(Rough finish). clamps, hacksaw frames and & application operations,-
blades, specification, as per BIS 696 addition ,
description, types and their subtraction.
uses, method of using multiplication,
hacksaws. division of decimal
number
4. Filing practice, surface Files- specifications, Simple Properties and uses
filing, marking of straight description, materials, grades, conventional of plain carbon
and parallel lines with odd cuts, file elements, uses. symbols for steel and alloy
leg calipers and steel rule, Measuring standards (English, material and steel.
marking practice with Metric Units), angular parts as per BIS
dividers, odd leg calipers measurements, subdivisions, ---696
and steel rule (circles, arcs, try square, ordinary depth
parallel lines). gauge, protractor- description,
uses and cares.
5. Marking off straight lines Marking off and layout tools, Use of drawing Fraction and
and arcs using scribing dividers, scribing block, odd instruments in decimal -
block and dividers, leg calipers, punches- the conversion fraction
chipping flat surfaces along description, classification, construction of decimal and vice-
a marked line. material, care & maintenance. Geometrical versa.
drawings-
angles,
triangles.
6. Marking, filing, filing Calipers- types, material, Geometrical Properties and uses
square, use of tri-square. constructional details, uses, construction of of copper, zinc,
care & maintenance of cold rectangles, lead, tin,
chisels- materials, types, square, circles. aluminum.
cutting angles.
7&8 Marking according to simple Marking media, marking blue, Geometrical Composition,
blue prints for locating, Prussian blue, red lead, chalk construction of properties and uses
position of holes, scribing and their special application, polygon and of brass, bronze,
lines on chalked surfaces description. Use, care and ellipse, solder, bearing
with marking tools, finding maintenance of scribing block. parabola & material, timber,
center of round bar with the hyperbola. rubber etc.
help of ‘V’ block and
marking block. Joining
straight line to an arc.
9. Chipping, Chip slots & oils Surface plate and auxiliary Geometrical System of units,
grooves (Straight). marking equipment, ‘V’ block, construction of British, metric and
Filing flat, square, and angle plates, parallel block, involutes, oval, SI units for length,
parallel to an accuracy of description, types and uses, and helix. area, volume
0.5mm. Chip curve along a workshop surface plate- their capacity, weight,
line-mark out, key ways at uses, accuracy, care and time, angle, their
various angles & cut key maintenance. conversions.
ways. Types of files- convexing, Effect of alloying
taper, needle, care and elements in the
maintenance of files, various properties of C.I. &
types of keys, allowable steel.
clearances & tapers, types, uses
of key pullers.

10. File thin metal to an Physical properties of Free hand Unit of temperature
accuracy of 0.5 mm. Chip engineering metal: colour, sketching of for & related
& chamfer, grooving and weight, structure, and straight problems. Standard
slotting conductivity, magnetic, lines, & absolute temp.
fusibility, specific gravity. rectangles,
Mechanical properties: circles, square,
ductility, malleability hardness, polygons,
brittleness, toughness, tenacity, ellipse.
and elasticity.
11. Saw along a straight line, Drilling processes: common Free hand Mass, volume,
curved line, on different type (bench type, pillar type, sketching of density, sp. Gravity
sections of metal. Straight radial type), gang and multiple straight & specific weight
saw on thick section, M.S. drilling machine. lines, S.I. M.K.S. and
angle and pipes. rectangles, F.P.S. units of
circles, square, force, weight etc.
polygons, their conversion to
ellipse. related problems.

12. File steps and finish with Micrometer- outside and inside Standard Mass, volume,
smooth file accuracy ± – principle, constructional printing style density, weight, S.I.
0.25 mm. File and saw on features, parts graduation, for letters and , M.K.S. and F.P.S.
M.S. Square and pipe welds leading, use and care. numbers as per units of force
Industrial visit to Micrometer depth gauge, parts, IS : 696. weight etc. their
Mechanical Industry / graduation, leading, use and Industrial conversion to
manufacturing industry. care. Digital micrometer. Visit related problems.
Industrial Visit Industrial Visit

13. File radius along a marked Vernier calipers, principle, Free hand Inertia, rest and
line (Convex & concave) & construction, graduations, sketching of motion, velocity
match. Chip sheet metal reading, use and care. Vernier simple and acceleration.
(shearing). Chip step and bevel protractor, construction, geometrical
file. graduations, reading, use and solids, cube,
care, dial Vernier Caliper, cone, prism,
Digital vernier caliper. cylinder,
sphere,
pyramids.

14. Punch letter and number Drill holding devices- material, Scales- Concept of scalar
(letter punch and number construction and their uses. construction and vector quantity
punch), use of different plan, with examples,
punches. Representing Newton’s Law of
fraction motion.

15. Revision & Test (Two Revision & Test Revision & Revision & Test
days) Prepare forge. Fire for Safety precautions to be Test Power and roots
heating metals. Forge a observed in a smith shop, forge Construction of Factor, Power base
square rod from round stock. - necessity, description uses, diagonal scale. exponents number.
Judge the forging fuel used for heating, bellows
temperature of various blowers, description and uses.
metals.

16. Forge M.S. bar to square, Anvil and swage blocks. Simple Multiplication and
octagon and hexagon. Description and uses. Forging dimensioning division of power
tools- hammers- band and technique, size and root of a
sledge, description and uses. and location, number.
Chisels, set hammers, flatters, dimensions of
hardier, fuller swage & uses. parts, holes
angles, taper,
screw etc. as
per BIS. 696.

17. Forge flat chisel, grind. Measuring and checking tools- Transferring Square root of
steel rule, brass rule, calipers, measurements number and
 try square, description and for linear, problems
uses. General idea about the angular,
main operations performed in a circular
forging shop such as upsetting dimensions
drawing, twisting, bending, form the given
punching, drilling, and object to the
welding. related free
hand sketches
using different
measuring
instruments.
18. Forge – punches, screw Heat treatment, various heat Pictorial Work energy and
drivers, chisels, grind them treatment methods - drawings, power, their units
to shape and heat treat to normalizing, annealing, isometric and applied
requirement, bending metals hardening and tempering. drawings of problems.
to angles, curves & twisting, Power hammer – construction, simple
Preparation of brackets. features, method of operating geometrical
and uses. solids.

19. Marking of straight lines, Safety precautions to be ----do----- ----do-----

circles, profiles and various observed in a sheet metal
geometrical shapes and workshop, sheet and sizes,
cutting the sheets with snips. Commercial sizes and various
Marking out of simple types of metal sheets, coated
development, marking out sheets and their uses as per BIS
for flaps for soldering and specifications.
sweating.
20 Make various joints: wiring, Marking and measuring tools, Oblique Percentage,
hemming, soldering and wing compass, Prick punch, tin projection of changing
brazing, form locked, man’s square tools, snips, types simple percentage to
grooved and knocked up and uses. Tin man’s hammers geometrical decimal and
single hem straight and and mallets type-sheet metal solids. fraction and vice
curved edges form double tools, stakes-bench types, parts, versa. Applied
hemming,. Punch holes- their uses. Soldering iron, problems.
using hollow and solid types, specifications, uses.
punches. Do lap and butt Trammel- description, parts,
joints. uses. Hand grooves-
specifications and uses.
21. Bend sheet metal into Solders-composition of various Oblique Problem on
various curvature form, types of solders, and their projection of percentage related
wired edges- straight and heating media of soldering iron, simple to trade.
curves, fold sheet metal at fluxes types, selection and geometrical
angle using stakes. Bend application-joints wiring- solids.
sheet metal to various various types of metal joints,
curvatures. Make simple their selection and application,
Square, container with wired tolerance for various joints,
edge and fix handle. their selection & application.
22. Make square tray with Rivets-Tin man’s rivets, types, Isometric Different types of
square soldered corner Make sizes, selection for various drawing of loads, stress, strain,
funnel as per development works. simple modulus of
and solder joints Make Riveting tools, dolly snaps, machined & elasticity.
riveted lap and butt joint. description and uses. Method of casting blocks.
riveting, shearing machine-
description, parts and uses.
 23. Welding - Striking and Safety-importance of safety and ----do--- Ultimate strength,
maintaining arc, laying general precautions observed in different types of
straight-line bead. a welding shop. Precautions in stress, factor of
electric and gas welding. safety, examples.
(Before, during, after)
Introduction to safety
equipment and their uses.

24. Making square, butt joint Hand tools: Hammers, welding ----do--- ----do----
and ‘T’ fillet joint-gas and description, types and uses,
arc. Do setting up of flames, Machines and accessories, Free hand Ratio & proportion-
fusion runs with and without welding transformer, welding sketches of Ratio, finding
filler rod, gas and arc. generators, description, trade related forms ratio
Make butt weld and corner, principle, method of operating, hand tools and proportions, direct
fillet welding- Gas and Arc. carbon dioxide welding. measuring proportion and
Practice in soft soldering H.P. welding equipment: tools. indirect proportion.
and silver soldering. Gas description, principle, method Application of ratio
cutting. of operating L.P. welding and proportion &
equipment: description, related problems.
principle, method of operating.
Types of Joints-Butt and fillet
as per BIS specifications.
Oxygen acetylene cutting-
machine description, parts,
uses, method of handling,
cutting torch-description, parts,
function and uses. Gases and
gas cylinder description, kinds,
main difference and uses.
25. (i) Project Work
(ii) Industrial Visit (Optional)
26. Examination

Syllabus for the Trade of “Fitter”

Second Semester
(Semester Code no. FTR - 02)
Duration : Six Month

Sl.No. Trade Practical Trade Theory Engineering Vocational

Drawing Science and
Calculation
1 True job on four jaw Safely precautions to be Simple sketches of Simple machines-
chuck using knife tool, observed while working trade related hand principle, velocity
face both the ends for on a lathe, Lathe tools & measuring ratio, mechanical
holding between cetres, specifications, and instruments advantage,
Using roughing tool constructional features. efficiency, related
parallel turn ± O.1 mm. Lathe main parts problems.
Measure the diameter descriptions- bed, head
using outside caliper and stock, carriage, tail stock,
steel rule. feeding and thread cutting
 mechanisms. Holding of
job between centers,
works with catch plate,
dog, simple description of
a facing and roughing tool
and their applications.

2 Lathe operations- the Lathe cutting tools- Brief Machines- basic Simple machines-
facing, parting and form study of the nomenclature principles, principle, velocity
tools, plain turn, step turn, of Lathe cutting tools and velocity, ratio, ratio, mechanical
holding job in three jaw necessity of correct mechanical advantage,
chuck- deburr, chamfer- grinding, solid and tipped, advantage, and efficiency. Simple
corner, round, the ends, throw away type tools, efficient, simple problems.
Shoulder turn : square, cutting speed and feed problems.
filleted, beveled under cut and comparison for
shoulder, turning-filleted H.S.S., carbide tools. Use
under cut, square beveled. of coolants and lubricants.

3 Cut grooves- square, Chucks and chucking the Orthographic Algebraic

round ‘V’ groove, Make a independent four-jaw drawings, symbols,
mandrel-turn diameter to chuck. Reversible application of both fundamental
sizes. Knurl the job. features of jaws, the back the first angle and algebra operations,
plate, Method of clearing third angle. sign and symbols
the thread of the chuck- Method of used in algebra,
mounting and representing the coefficient terms,
dismounting, chucks, drawings for and unlike terms.
chucking true, face plate, simple and
drilling - method of complex machine
holding drills in the tail parts, exercises
stock, Boring tools and with dimensions.
enlargement of holes.

4 Bore holes –spot face, General turning Algebraic

pilot drill, enlarge hole, operations- parallel or addition, sub
using boring tools, make straight, turning. Stepped traction,
a bush step bore-cut turning, grooving, shape ----do---- multiplication and
recess, turn hole diameter of tools for the above division.
to sizes. operations. Appropriate
method of holding the
tool on tool post or tool
rest, Knurling: - tools
description, grade, uses,
speed and feed, coolant
for knurling, speed, feed
calculation.
5 Turn taper (internal and Taper – definition, use Orthographic Power and
external). Turn taper pins. and method of expressing drawings exponent. Laws of
Turn standard tapers to tapers. Standard tapers- application of both exponent.
suit with gauge. taper, calculations morse the first angle and
taper. third angle.
Method of
 representing the
drawings for
simple and
complex machine
blocks given for
exercises with
dimensions.
6 Threading practice by Screw thread definition – Algebraic
using cut threads using uses and application. simplification
taps, dies on lathe by Terminology of screw problems.
hand, ‘V’ thread – threads, square, worm,
external. Prepare a nut buttress, acme ( non
and match with the bolt. standard-screw threads
),Principle of cutting
screw thread in centre ------do-----
lathe –principle of
chasing the screw thread
– use of centre gauge,
setting tool for cutting
internal and external
threads, use of screw
pitch gauge for checking
the screw thread.
7 Mark off and drill through Drill- material, types, Standard method Simple machines
holes, drill on M.S. flat, (Taper shank, straight of sectioning as like winch pulley
file radius and profile to shank) parts and sizes. per B IS: 696. and compounding
suit gauge. Drill angle-cutting angle Exercises for axle etc.
for different materials, different sectional
cutting speed feed. views on the given
R.P.M. for different orthographic
materials. drawing of
machine part,
castings etc
8 Step fit, angular fit, file Drill troubles: causes and Factors and
and make angle, surfaces remedy. Equality of lips, equations:
(Bevel gauge accuracy 1 correct clearance, dead Algebraic formula.
degree) make simple open centre, length of lips. ----do---.
and sliding fits. Drill kinds : Fraction,
metric, letters and
numbers, grinding of
drill.
9 Enlarge hole and increase Grinding wheel: Factors and
internal dia. File Abrasive, grade different types of
cylindrical surfaces. structures, bond, factorisation.
Make open fitting of specification, use,
curved profiles. mounting and dressing.
Bench grinder parts and ----Do----
use-radius gauge, fillet
gauge, material,
construction, parts
 function and metric,
different dimensions,
convex and concave uses
care and maintenance.
10 Make the circles by Radius gauge, feeler Standard method Equations simple
binding previously drilled gauge, hole gauge, and of sectioning as simultaneous
hole. Test angular match their uses. per BIS.696 equation
up. Exercises for
different sectional
views on the given
orthographic
drawing of
machine parts,
casting etc
11-12 Inside square fit, make Vernier height gauge : Conversion of Equation simple
combined open and material construction, isometric, oblique simultaneous,
sliding fit, straight sides parts, graduations drawings to quadratic.
‘T’ fit. (English & Metric) uses, orthographic
care and maintenance, Pig drawings and vice-
Iron : manufacturing versa. Related
process ( by using)Blast problems such as
furnace types, of pig Iron ‘V’ block oriented
, properties and uses. by various
machining
operations etc.
13 File fit- combined, open Cast Iron: manufacturing Application,
angular and sliding sides. process by using (cupola construction and
File internal angles 30 furnace) types, properties solution of
minutes accuracy open, and uses. Wrought iron- : problems by
angular fit. manufacturing process -----do----- equation.
(Fuddling and Astor
process ) properties and
uses.

14 Make sliding fit with Steel: manufacturing Atmospheric

angles other than 90o, process plain carbon pressure, pressure
sliding fit with an angle. steels, types, properties -----do--- gauge, gauge
and uses. pressure and
absolute pressure
and their units.
15 Make simple bracket by Non-ferrous metals Logarithms and
bending and twisting of (copper, aluminum, tin, -----do--- use of logarithms
non-ferrous metal. Drill lead, zinc) properties and tables:
small holes (2mm) Drill uses.
holes on sheet metal,
bend short for round
bracket.
16 Form internal threads Screw threads: Logarithms:
with taps to standard size terminology, parts, types logarithm and
(through holes and blind and their uses. Screw exponent.
 holes) – Drill through pitch gauge: material Use of logarithms
hole and tap drill blind parts and uses. Taps and anti-logarithm
hole and tap, prepare British standard (B.S.W., table.
studs and bolt. B.S.F., B.A. & B.S.P.)
and metric /BIS (course
and fine) material, parts -----do----
(shank body, flute, cutting
edge). Method of using
and use of calculating tap
hole sizes. Tap wrench:
material, parts, types
(solid & adjustable types)
and their uses removal of
broken tap, studs (tap stud
extractor).
17 Form external threads Dies : British standard, Arithmetical
with dies to standard size. metric and BIS standard, operations
Prepare nuts and match material, parts, types, involving
with bolts. Method of using dies. Die logarithms in the
stock: material, parts and computations.
uses.
18 Counter sink, counter Counter sink, counter Problem related to
bore and ream split fit bore and spot facing-tools the trade using
(three piece fitting). and nomenclature, -----do---- logarithm tables.
Reamer- material, types
(Hand and machine
reamer), kinds, parts and
their uses, determining
hole size (or reaming),
Reaming procedure.
19 Filling & scraping of Scrapers and their types, -----do----- ----do----
bearing to close precision. methods of scraping.

20 File and fit combined Vernier micrometer, Surface Specific gravity,

radius and angular surface material, parts, development of principle of
(accuracy ± 0.5 mm), graduation, use, care and simple geometrical Archimedes.
angular and radius fit. maintenance. solids like cube,
Locate accurate holes. rectangular block,
Make accurate hole for cone, pyramid,
stud fit. cylinder, prism
etc.
21 Make assembly for Screw thread micrometer: ----do--- Relation between
dovetail sliding fits using Construction, graduation specific gravity
lower pins and screws (± and use. and density simple
0.04 mm) experimental
determination.
22 Cutting threads using Dial test indicator, Geometry:
dies. Make sliding fits construction, parts, Fundamental
assembly with parallel material, graduation, geometrical
and angular mating Method of use,. Care and ----do--- definition- angles
 surface. (± 0.04 mm) maintenance. Digital dial and properties of
indicator. Comparators- angles, triangles,
measurement of quality in and properties of
the cylinder bores. triangles.
23 & Simple repair work, Preventive maintenance- Interpretation of Pythagoras
24 simple assembly of objective and function of solids and theorem,
machine parts from blue P.M., section inspection. conventional properties of
prints Visual and detailed, application of similar triangles.
lubrication survey, system intersectional Revision.
of symbol and colour curves on drawing.
coding. Revision, simple Solution of NCVT
estimation of materials, test paper
use of handbooks and (preliminary)
reference table. Revision.

25 (i) Project Work(ii) Industrial Visit (Optional)

26 Examination

Syllabus for the Trade of “Fitter”

Third Semester
(Semester Code no. FTR - 03)
Duration : Six Month

Week Engineering. Vocational Cal. &

Trade Practical Trade Theory
No. Drawing Science
Prepare triangle, Keys and keyways. Types Revision of first Revision of 1st
hexagon on ends of a and their uses, year topics. year course.
01
cylinder bar, prepare construction (shape).
female end and fit.
Make key and keyways Spring-material types and ---do--- ---do---
on the shaft and fit. uses.
02
“V” grooves and slots
on the cast iron block.
Make riveted joints (lap Bolts and Nuts: Material, Screw thread, their Rectangle, square,
and butt joints) types (Hexagonal and standard forms as Rhombus,
square head) and their per BIS, external parallelogram and
uses. and internal their properties.
03 thread,
conventions on the
features for
drawing as per
BIS.
04 Drill on cylindrical Washers: Material, types ----do--- Circle and
 surface. (spring, tab, plain washer properties circle:
and fiber washer). regular polygons.
Scrap on flat surfaces, Simple scraper- cir., flat, Sketches for bolts, Application of
scrap on curved half round, triangular and nuts, screws and geometrical to
surfaces and scrap hook scraper and their other screwed shop problems.
05 surface parallels and uses. members.
test. Make & assemble,
sliding flats, plain
surfaces.
Make simple dowel Dowel pins : material, Sketches for bolts, Heat &
pins, fitting dowel pins construction, types nuts, screws and temperature,
06 and tap screw ,accuracy and uses. other screwed thermometric
assembly. members. scales, their
conversions.
Assembly sliding for Screws: material, different Standard rivet Temperature
using keys and dowel types (inch & metric), forms as per BIS. measuring
07 pin and screw, ± 0.02 uses instruments.
mm accuracy on plain
surface.
Testing of sliding Testing scraped surfaces: --do— Specific heats of
fitting job, scrap on two ordinary surfaces without solids & liquids.,
08
flat surfaces and curved a master plate. quantity of heat.
surfaces.
File & fit angular Special files: types (pillar, Riveted joint. Heat loss and heat
mating surface plain Dread naught, Barrow, gain, with simple
09 within an accuracy of ± warding) description. problems.
0.02 mm & angular 15
minutes angular fitting.
Drill through and blind System of drill size, Riveted joints- Mensuration: Plain
holes at an angle-drill Fractional size: number, butt. figures-triangles,
blind holes, ‘Y’ fitting. letter and metric. square, rectangle,
10
Templates and gauges- parallelogram.
Introduction, necessity,
types.
Dovetailed fitting, Gauges: Introduction, Sketches of keys, Plain figures.
radius fitting. necessity, types- cotter and pin Trapezium,
description and uses of joints. regular polygons,
11 gauge- types (feeler, circle, hollow
screw, pitch, radius, wire circles.
gauge),description and
use.
Precision drilling, Limit gauge: Ring gauge, Plain figures-
reaming and tapping. snap gauge, plug gauge, ----do--- segment and
12
Test- Job. description and uses. sector of circle,
ellipse, fillets.
 File and fit, combined Slip gauge: Necessity of Sketches for Solid figures:
fit with straight, using, classification & simple pipe, Prism, cylinder,
angular surface with ± accuracy, set of blocks unions with simple pyramid, cone.
0.02 mm accuracy, (English and Metric). pipe line drawings.
hexagonal fitting. Details of slip gauge.
Metric sets 46: 103: 112.
13 Wrining and building up
of slip gauge and care and
maintenance. Application
of slip gauges for
measuring, Sine bar-
Principle, application &
specification.
Drilling and reaming, Locking device: Nuts- ---do---- Solid figures:
small dia. holes to types (lock nut castle nut, frustum of a cone,
accuracy correct slotted nuts, swam nut, sphere, spherical
location for fitting grooved nut) Description segment.
14
Make male and female and use.
fitting parts, drill and
ream holes not less
than 12.7 mm.
Sliding fitting, Lapping: Application of Concept of Material weight
Diamond fitting, lapping, material for preparation of and cost problems
Lapping flat surfaces lapping tools, lapping assembly drawing related to trade.
using lapping plate. abrasives, charging of and detailing.
lapping tool. Surface Simple assemblies
finish importance, & their details of
equipment for testing- trade related
15 terms relation to surface tools/job/exercises
finish. Equipment for with the
tasting surfaces quality – dimensions from
dimensional tolerances of the given sample
surface finish. or models. Tool
post for the lathe
with washer and
screw.
Stepped keyed fitting- Honing: Application of Trigonometry:
test job. Lapping holes honing, material for ---do--- trigonometrical
and cylindrical honing, tools shapes, ratios, use of
16
surfaces. grades, honing abrasives. trigonometrical
Frosting- its aim and the table.
methods of performance.
Making a snap gauge Interchangeability: Details and Area of triangle by
for checking a dia of 10 Necessity in Engg, field assembly of Vee- trigonometry.
± 0.02 mm. definition, BIS. blocks with
Definition, types of limit, clamps.
17
terminology of limits and
fits-basic size, actual size,
deviation, high and low
limit, zero line, tolerance
 zone.
Scrape angular mating Different standard systems Details and Finding height and
surface, scrap on of fits and limits. British assembly of Vee- distance by
internal surface. standard system, BIS blocks with trigonometry.
18
system., Method of clamps.
expressing tolerance as
per BIS
Practice in dovetail Fits : Definition, types Details of Application of
fitting assembly and description of each with assembly of shaft trigonometry in
dowel pins and cap sketch. and pulley. shop problems.
19
screws assembly.

Industrial visit. Industrial visit. Industrial visit. Industrial visit.

Preparation of gap Manufacture: The name Details of Application of
gauges. and types of gauge assembly of shaft trigonometry in
commonly used in and pulley. shop problems
gauging finished product-
20
Method of selective
assembly ‘Go’ system of
gauges, hole plug basis of
standardisation.
Dovetail and Dowel pin Bearing-Introduction, Details of Triangle of forces,
assembly, scraps classification (Journal and assembly of bush parallelogram of
cylindrical bore. Thrust), Description of bearing. forces.
21 each, ball bearing: Single
row, double row,
description of each, and
advantages of double row.
Scrapping cylindrical Roller and needle Details of Composition and
bore and to make a fit- bearings: Types of roller assembly bush resolution of
make a cotter jib bearing. Description & bearing. forces.
22 assembly. use of each. Method of
fitting ball and roller
bearings.

Scrapping cylindrical Bearing metals – types, Details of Representation of

taper bore, check taper composition and uses, assembly of a forces by vectors-
angle with sine bar, lubricants purpose of simple coupling. simple problems
23
check in per angle (flat) using different types, on lifting tackles
with sine bar. description and uses of like jib cranes,
each type. wall cranes etc.
Preparation of centre, Synthetic materials for
squares, drills gauges. bearing: The plastic ---do--- ---do---
File and fit straight and laminate materials, their Details and Moments of force,
angular surfaces properties and uses in assembly of a couples. Simple
24 internally. bearings such as phonolic, simple hand vice. problems on
Continuation of Filling pejlon polymide (nylon). straight and bell
exercises of week No. Hardening and tempering, cranked lever.
77. Identify different purpose of each method,
ferrous metals by spark tempering colour chart.
 test Annealing and
normalising, purpose of
each method.
25 (i) Project Work (ii) Industrial Visit (Optional)
26 Examination

Syllabus for the Trade of “Fitter”

Fourth Semester
(Semester Code no. FTR - 04)
Duration : Six Month

Week Trade Practical Trade Theory Engineering Vocational science

No. drawing & calculation
01. ‘H’ fitting- Case hardening and Details and Centre of gravity,
carburising and its methods, assembly of simple simple
process of carburising hand – vice. experimental
(solid, liquid and gas). determination,
stable, unstable &
neutral
equilibrium,
simple explanation
02. Exercises on lapping of Solder and soldering:
gauges (hand lapping Introduction-types of solder ----do--- ---do---
only) and flux. Method of
soldering, Hard solder-
Introduction, types and
method of brazing.
03. Hand reams and fit Production of gauges, Friction- co-
taper pin, drilling and templates and jigs. The ---do--- efficient of
reaming holes in objective of importance for friction.
correct location, fitting preparing interchangeable
dowel pins, stud, and components.
bolts.
04. Simple jigs and Drilling jig-constructional Blue print Simple problem
fixtures for drilling. features, types and uses. Reading. Simple related to friction.
exercises related to
missing lines.
05. Prepare a ‘V’ block Fixtures-Constructional ---do--- Magnetic
and a clamp. features, types and uses. substances- natural
and artificial
magnets.
06 Marking out as per Revision. Method of
Blue print, drilling, ---do--- magnetisation.
straight and curve Use of magnets.
filing. Threading with
 die, cutting slot, and
cutting internal threads
with taps, making an
adjustable spanner.
07. Flaring of pipes and Pipes and pipe fitting- ---do--- Electricity & its
pipe joints, commonly used pipes. Pipe uses electric
Cutting & Threading bending methods. Use of current-positive &
of pipe length. Fitting bending fixture, pipe negative terminals.
of pipes as per sketch. threads-Std. Pipe threads
Conditions used for Die and Tap, pipe vices.
pipe work to be
followed. Bending of
pipes- cold and hot.
08. Practice-dismantling & Standard pipefitting-. Simple exercises Use of fuses and
assembling – globe Methods of fitting or relating missing switches,
valves sluice valves, replacing the above fitting, symbols. conductors and
stop cocks, seat valves repairs and erection on insulators.
and non-return valve, rainwater drainage pipes
fitting of pipes and and house hold taps and
testing for leakage. pipe work. Use of tools such
as pipe cutters, pipe
wrenches, pipe dies, and
tap, pipe bending machine
etc.
09. Practice in handling Fire precautions-causes and Simple exercises Simple electric
Fire extinguishers of types of fires, precautions relating to missing circuits ,simple
different types against out break of fire. symbols. calculations.
,refilling of Fire Extinguishers-types
extinguishers. and use.

10. Marking detail Working material with Simple exercises Ohm’s Law.
includes male & finished surface as related to missing Simple
female screw cutting, aluminium, duralumin, section. calculation,
male and female fitting stainless steel, the electrical
parts. Making and importance of keeping the insulating
tempering springs. work free from rust and materials.
corrosion. The various
coatings used to protect
metals, protection coat by
heat and electrical deposit
treatments.
Treatments and provide a
pleasing finish as chromium
silver plating and nickel
plating, and galvanising.
11. Exercises on finished Aluminium and its alloys. Simple exercises Graphs : abscissa
material as aluminium Uses ,advantages and related to missing and ordinates,
and stainless steel, disadvantages, weight and section. graphs of straight
marking out, cutting to strength as compared with line, related to two
size, drilling etc. steel. sets of varying
 without damage to quantities.
surface of finished
articles.
12. Making out for angular Tapers on keys and cotters Simple exercises
outlines, filing and permissible by various related to missing
fitting the inserts into standards. Discuss non- dimensions. ----do---
gaps. Making a simple ferrous metals as brass,
drilling jig, Marking phosphor bronze, gunmetal,
out, filing to line, copper, aluminium etc.
drilling and tapping Their composition and
brass and copper jobs. purposes where and why
used, advantages for
specific purposes, surface
wearing properties of
bronze and brass.
13. Complete exercises Power transmission Practice on simple
covering the assembly elements. The object of ---do--- pocket calculator.
of parts working to belts, their sizes and
detail and arrangement specifications, materials of
– Drawings. which the belts are made,
Dismantling and selection of the type of belts
mounting of pulleys. with the consideration of
Making replacing weather, load and tension
damaged keys. methods of joining leather
Repairing damaged belts.
gears and mounting.
Repair & replacement Vee belts and their
of belts. advantages and
disadvantages, Use of
commercial belts, dressing
and resin creep and slipping,
calculation.

14. Complete exercises Power transmissions, Further practice on Mechanical

covering the assembly coupling types-flange logarithm. properties of
of parts working to coupling,-Hooks coupling- metals.
details and universal coupling and their
arrangements as per different uses.
drawings. Dismantling
and mounting of
pulleys. Making,
replacing damaged
keys. Repairing
damaged gears and
mounting them on
shafts.
15. More difficult work in Pulleys-types-solid, split ----do---
marking out including and ‘V’ belt pulleys, ----do---
tangents, templates standard calculation for
involving use of determining size crowning
 vernier protractor. of faces-loose and fast
pulleys-jockey pulley.
Types of drives-open and
cross belt drives. The
geometrical explanation of
the belt drivers at an angle.
16. Fitting of dovetail Power transmission –by Solution of NCVT Basic Electronics.
slides. gears, most common form test.
spur gear, set names of
some essential parts of the
set-The pitch circles,
Diametral pitch, velocity
ratio of a gear set, Helical
gear, herring bone gears,
bevel gearing, spiral bevel
gearing, hypoid gearing,
pinion and rack, worm
gearing, velocity ration of
worm gearing. Repair to
gear teeth by building up
and dovetail method.
17. Male and female Method or fixing geared Solution of NCVT
dovetail fitting repairs wheels for various purpose test papers. ----do---
to geared teeth. Repair drives. General cause of the
of broken gear tooth by wear and tear of the toothed
stud. Repair broker wheels and their remedies,
gear teeth by dovetail. method of fitting spiral
gears, helical gears, bevel
gears, worm and worm
wheels in relation to
required drive. Care and
maintenance of gears.
18. Marking out on the Lubrication and lubricants- Transmission of
round sections for Method of lubrication. A ----do--- power by belt,
geometrical shaped good lubricant, viscosity of pulleys & gear
fittings. Finishing and the lubricant, Main property drive.
fitting to size, checking of lubricant. How a film of Calculation of
up the faces for oil is formed in journal. Transmission of
universality. Bearings, method of power by belt
lubrication-gravity feed, pulley and gear
force (pressure) feed, splash drive.
lubrication. Cutting
lubricants and coolants:
Soluble off soaps, suds-
paraffin, soda water,
common lubricating oils and
their commercial names,
selection of lubricants.
19 Making-parallel block Chains, wire ropes and Solution of NCVT Solution of NCVT
& & ‘V’ block. clutches for power test papers. test papers.
20 Drilling for riveting. transmission. Their types
Riveting with as many and brief description.
types of rivet as Discuss the various rivets
available , use of shape and form of heads,
counter sunk head riveting tools for drawing
rivets, use of counter up the importance of correct
bore tool to fit cheese head size. The spacing of
head bolts. Use of pop rivets. Flash riveting, use of
rivets and gun. correct tools, compare hot
and cold riveting.
21 Inspection of Machine Installation, maintenance and Revision Basic Electronic
& tools. overhaul of machinery and control system.
22 Accuracy testing of engineering equipment and
Machine tools. Hydraulics & pneumatic
symbols & exercise. Hydraulics
pneumatic circuits. Clutch:
Type, positive clutch (straight
tooth type, angular tooth type) .
23. Study of power Washers-Types and calculation Revision
transmission system in of washer sizes. The making of ----do---
machine tools. joints and fitting packing. The
use of lifting appliances,
extractor presses and their use.
Practical method of obtaining
mechanical advantage. The
slings and handling of heavy
machinery, special precautions
in the removal and replacement
of heavy parts.
24. Simple repair of Foundation bolt: types (rag, Revision
machinery, making of Lewis cotter bolt) description of ----do---
packing gaskets, use of each erection tools, pulley block,
hollow punches, crow bar, spirit level, Plumb
extractor ,drifts, bob, pipe 2 X 4’, wire rope,
various types of manila rope, wooden block.
hammers and spanners,
etc. Practicing,
making various knots,
correct loading of
slings, correct and safe
removal of parts. Erect
sample machines.
25. Revision
26. Examination

List of Tools & Equipments for the Trade of “Fitter”

 For 16 trainees + one (for Instructor)

A : Trainees kit

Sl. No. Name of the items Qty

1 Steel Rule 15 cm with metric graduation 17 nos.
2 Try Square 10 cm blade. 17 nos.
3 Caliper inside 15 cm spring. 17 nos.
4 Caliper 15 cm hermaphrodite 17 nos.
5 Caliper outside 15 cm spring 17 nos.
6 Divider 15 cm spring 17 nos.
7 Straight Scriber 15 cm. 17 nos.
8 Centre Punch 10 cm 17 nos.
9 Screw driver 15 cm 17 nos.
10 Chisel cold flat 10 cm 17 nos.
11 Hammer ball peen 0.45 kg. With handle 17 nos.
12 Hammer ball peen 0.22 kg. With handle. 17 nos.
13 File flat 25 cm. second cut 17 nos.
14 File flat 25 cm. smooth 17 nos.
15 File half round second cut 15 cm. 17 nos.
16 Hacksaw frame fixed 30 cm. 17 nos.
17 Safety goggles. 17 nos.
18 Dot slot punch 10 cm. 17 nos.

B: Instruments & General Shop Outfit

Sl. No. Name of the items Qty

19 Steel Rule 30 cm 4 nos.
20 Steel Rule 60 cm. 4 nos.
21 Straight edge 45 cm steel 2 nos.
22 Surface plate 45 x 45 cm CI / Granite. 2 nos.
23 Marking table 91 x 91 x 122 cm. 1 no.
24 Universal scribing block 22 cm. 2 nos.
25 V-Block pair 7 cm and 15 cm with clamps 2 nos.
26 Square adjustable 15 cm blade. 2 nos.
27 Angle plate 10 x 20 cm. 2 nos.
28 Spirit Level 15 cm metal 1 no.
29 Punch letter 3 mm set. 1 no.
30 Punch number set 3 mm. 1 no.
31 Punch hollow 6 mm to 19 set of 5 2 nos.
32 Punch round 3mm x 4 mm set of 2 2 nos.
33 Portable hand drill (Electric) 0 to 6 mm 2 nos.
34 Drill twist straight shank 1.5 to 12 mm by 0.5 mm 1 Set
35 Drill twist straight shank 8 mm to 15 mm by ½ mm 1 Set
36 Taps and dies complete set in box B.A 1 no.
37 Taps and dies complete set in box with-worth. 1 no.
38 Taps and dies complete set in box 3-18 mm set of 10 1 no.
39 File warding 15 cm smooth 4 nos.
40 File knife edge 15 cm smooth 4 nos.
41 File cut saw 15 cm smooth 4 nos.
42 File feather edge 15 cm smooth 4 nos.
43 File triangular 15 cm smooth 2 nos.
44 File round 20 cm second cut 8 nos.
45 File square 15 cm second cut 4 nos.
46 File square 25 cm second cut 4 nos.
47 Feeler gauge 10 blades 1 set
48 File triangular 20 cm second cut. 8 nos.
49 File flat 30 cm second cut. 8 nos.
50 File flat 20 cm bastard 8 nos.
51 File flat 30 cm bastard. 8 nos.
52 File Swiss type needle set of 12. 2 sets
53 File half round 25 cm second cut. 8 nos.
54 File half round 25 cm bastard. 4 nos.
55 File round 30 cm bastard. 4 nos.
56 File hand 15 cm second cut. 8 nos.
57 Card file. 8 nos.
58 Oil Stone 15 cm x 5 cm x 2.5 cm 4 nos.
59 Stone carborandum 15 cm x 5 cm x 5 cm x 4 cm. 2 nos.
60 Oil Can 0.25 liters. 2 nos.
61 Pliers combination 15 cm 2 nos.
62 Soldering Iron 350 gm. 2 nos.
63 Blow Lamp 0.50 liters. 2 nos.
64 Spanner D.E. 6 -26 mm set of 10 pcs. 8 nos.
65 Spanner adjustable 15 cm 2 nos.
Interchangeable ratchet socket set with a 12 mm driver,
66 1 set
sized10-32 mm set of 18 socket & attachments.
67 Box spanner set 6-25 mm set of 8 with Tommy bar. 1 set
68 Glass magnifying 7 cm 2 nos.
69 Clamp toolmaker 5 cm and 7.5 cm set of 2. 2 nos.
70 Clamp “C” 5 cm 2 nos.
71 Clamp “C” 10 cm 2 nos.
72 Hand Reamer adjustable cover max 9 ,12,18mm – set of 3 1 set
73 Hand Reamer taper 4 -9mm set of 6 OR 4 -7 mm set of 4. 1 set
74 Reamer parallel 12 - 16mm set of 5. 1 no.
75 Scraper flat 15 cm. 8 nos.
76 Scraper triangular 15 cm 8 nos.
77 Scraper half round 15cm 8 nos.
78 Chisel cold 9 mm cross cut 9 mm diamond. 8 each
79 Chisel cold 19 mm flat 8 nos.
80 Chisel cold 9 mm round noze. 8 nos.
81 Stud Extractor EZY – out 2 nos.
82 Combination Set 30 cm. 2 nos.
83 Micrometer 0 – 25 mm outside. 3 nos.
84 Micrometer 25 – 50 mm outside. 3 nos.
85 Micrometer 50 –75 mm outside. 2 nos.
86 Micrometer inside 25 - 50 mm with extension rods. 1 no.
87 Vernier caliper 15 cm 1 no.
88 Vernier height gauges 30 cm. 1 no.
89 Vernier bevel protractor. 1 no.
90 Screw pitch gauge. 1 no.
91 Wire gauge, metric standard. 1 no.
92 Drill twist Taper Shank 12 mm to 25 mm x 1.5. 1 no.
93 Drill chuck 12 mm. 1 no.
94 Pipe wrench 40 cm 1 no.
95 Pipe vice 100mm 1 no.
96 Adjustable pipe tap set BSP with die set cover pipe size 15, 20, 1 no.
25,32,38,50 mm.
97 Wheel dresser (One for 4 units). 1 no.
98 Machine vice 10 cm. 1 no.
99 Machine vice 15 cm 1 no.
100 Sleeve drill Morse 0 - 1, 1 - 2, 2 - 3. 1 Set
101 Vice bench 12 cm jaws. 16 nos.
102 Vice leg 10 cm jaw. 2 nos.
103 Bench working 240 x 120 x 90 cm. 4 nos.
104 Almirah 180 x 90 x 45 cm. 2 nos.
105 Lockers with 6 drawers (standard size). 2 nos.
106 Metal rack 182 x 182 x 45 cm 1 no.
107 Instructor Table 1 no.
108 Instructor Chair 1 no.
109 Black board with easel. 1 no.
110 Fire extinguisher (For 4 Units) 2 nos.
111 Fire buckets. 2 nos.
112 Machine vice 100mm. 2 nos.
113 Wing compass 25.4 cm or 30 cm. 2 nos.
 114 Hand hammer 1 kg. with handle. 2 nos.

C: Tools for Allied Trade- Blacksmith & Sheet Metal Work

Sl. No. Name of the items Qty

115 Hammer smith 2 kg. With handle. 2 nos.
116 Tongs roving 350mm. 2 nos.
117 Tongs fiat 350mm. 2 nos.
118 Smith's square 45 cm x 30 cm. 1 no.
119 Cold set rodded 25X200mm. 2 nos.
120 Hot set rodded 25X200mm. 1 no.
121 Swages top & bottom 12 mm /19 1 Each
122 Swage block 35 x 35 x 12 cm. 1 no.
123 Flatters (rodded) 55 mm square. 2 nos.
124 Fuller top & bottom 6 mm 9 mm (Pair). 2 nos.
125 Anvil 50 kg. 2 nos.
126 Anvil stand 2 nos.
127 Shovel. 2 nos.
128 Trammer 30cm. 1 no.
129 Rake. 2 nos.
130 Quenching tank (To be made in the Institute). 1 no.
131 Pocker. 2 nos.
132 Hardle. 2 nos.
133 Leather apron. 2 nos.
134 Prick punch 2 nos.
135 Mallet. 2 nos.
136 Snips straight 25 cm. 2 nos.
137 Setting hammers with handle. 2 nos.
138 Planishing hammer. 2 nos.
139 Snip bent 25 cm. 2 nos.
140 Stake hatchet. 2 nos.
141 Stake grooving. 2 nos.
142 Gauge imperial sheet. 1 no.
The specifications of the items in the above list have been given in Metric Units. The items which are
available in the market nearest of the specification as mentioned above, if not available as prescribed
should be procured Measuring instruments such as steel rule which are graduated both English and
Metric Units may be procured, if available.

D : Modified list of tools for the 3rd and 4th semester for fitter trade.

Sl.No. Name of the Tools & Equipment Quantity

*1. Slip Gauge as Johnson metric set. 1 Set
2. Carbide Wear Block 1 mm – 2 mm. 2 each
*3. Gauge snap Go and Not Go 25 to 50 mm by 5mm. Set of 6 pcs. 1 Set
*4. Gauge plug single 3 ended 5 to 55 by 5 mm. Set of 11 pcs. 1 Set
**5. Gauge telescopic upto 150 mm. 1 no.
6. Dial test indicator .01 mm on stand 1 no.
7. Sine bar 125 mm. 1 no.
8. Sine bar 250 mm. 1 no.
9. Lathe tools H.S.S. tipped set. 2 nos.
10. Lathe tools bit 6 mm x 75 mm. 4 nos.
11. Lathe tools bit 8 mm x 75 mm. 4 nos.
12. Lathe tools bit 10 mm x 85mm. 4 nos.
13. Arm strong type tool bit holder R.H. 2 nos.
14. Arm strong type tool bit holder L.H. 2 nos.
15. Arm strong type tool bit holder straight. 2 nos.
16. Stilson wrenches 25 cm 2 nos.
17. Pipe cutter 6 mm to 50 mm wheel type. 1 no.
18. Pipe bender spool type up to 25 mm. with stand manually operated. 1 no.
19. Adjustable pipe chain tonge to take pipes up to 300 mm. 1 no.
20. Adjustable spanner 38 cm long. 1 no.
**21. Dial vernier caliper 0 – 200 mm LCO 0.05 mm. (Universal type). 1 no.
**22. Screw thread micrometer with interchangeable 0-25mm. Pitch anvils 1 no.
for checking metric threads 60.
23. Depth micrometer 0-25 mm. 0.01 mm. 1 no.
**24. Vernier caliper 0-150 mm. L.C. 0.02 mm. 1 no.
**25. Comparators stand with dial indicator LC 0.01mm. 1 no.
26. Engineer’s try square (knife-wedge) 150 mm blade. 1 no.

**27 Surface roughness comparison plates N1-N12 grade 1 Set

 E : General Machinery Installations –

Sl. Name & Description of Machines Quantity

No.
*1. Lathe all geared head stock S.S. and S.C. height of centre over bed 15 cm – gap 2 Nos.
head complete with accessories e.g. pump, all fittings and splash guard driving plate
with drives, face plate 3 jaw and 4 jaw chucks fixed and travelling steady compound
turret tool post, taper turning attachment, fixed and running centres, driving dogs
straight and bent tails.
2 Drilling machine pillar sensitive 0-20 mm cap with swivel table motorised with chuck & 1 no.
key.
3 Drilling machine bench sensitive 0-12 mm cap motorised with chuck and key. 2 nos.
4 Forge portable hand blower 38 cm to 45 cm. 1 no.
5 Grinding machine (General purpose) D.E. pedestal with 2 cm. dia wheels rough and 1 no.
smooth with twist drill grinding attachment.

Note:- (*) No additional number of items are required to be provided up to four batches of trainees i.e.
two batches in the first shift and two in the second shift.
(**) Only one number need be provided in each I.T.I. irrespective of No. of Units.

F : List of additional tools for allied trade in welding

Sl. No. Name & Description of Machines Quantity

1. Transformer welding set 150 amps. – continuous welding current, with all 1 Set
accessories and electrode holder
2. Welder cable to carry 200 amps. With flexible rubber cover 20 Meter
3. Lungs for cable 12 Nos.
4. Earth clamps. 2 Nos.
5. Arc welding table (all metal top) 122 cm X 12 cm X 60 cm with positioner. 1 No.
6. Oxy – acetylene gas welding set equipment with hoses, regulator and other 1 Set.
accessories.
7. Gas welding table with positioner 1 No
8. Welding torch tips of different sizes 1 Set
9. Gas lighter. 2 Nos
10. Trolley for gas cylinders. 1 No
11. Chipping hammer. 2 Nos
12. Gloves (Leather) 2 Pairs
13. Leather apron. 2 Nos
14. Spindle key for cylinder valve. 2 Nos.
15. Welding torches 5 to 10 nozzles. 1 Set.
16 Welding goggles 4 Pairs.
17. Welding helmet with coloured glass 2 Nos.
18. Tip cleaner 10 Sets.
Note: - Those additional items are to be provided for the Allied Trade Training where
the welding trade does not exist.
 LIST OF ISI BOOKS FOR REFERENCE FOR FITTER TRADE.
(For use of Instructors only)
SL.No. Titles Code
1. Spring calipers. IS : 4052 – 1967
2. Punches IS : 413 – 1974
3. Matric steel scales for Engineers. IS : 1481 - 1970
4. Engineers square. IS : 2013 – 1972
5. V-Block. IS : 2049 – 1974
6. Steel straight edges. IS : 2220 – 1962
7. Hacksaw blades. IS : 2504 - 1977
8. Bench vices. IS : 2586 - 1975
9. Chisels (Cold) IS : 402 - 1974
10. Engineer’s file. IS : 1931 - 1972
11. Surface plates (C.I.) IS IS : 2285 – 1974
12. Twist drill ISIS : 5100 – 1960 to 5106
13. Vernier depth gauges. IS : 4213 – 1967
14. External micrometers. IS : 2967 – 1964
15. A dimension for counter – sinks & counter bores. IS : 3406 – 1975
16. Internal micrometers. IS : 2966 – 1964
17. Vernier calipers. IS : 3651 – 1974
18. Vernier height gauges. IS : 2021 – 1964
19. Gib – head keys and key ways. IS : 2203 – 1974
20. Taper keys and key ways. IS : 2292 – 1974
21. Screw driver. IS : 884 – 1972
22. Bevel protractors. IS : 4229 – 1970
23. Reamers. IS : 1836 – 1961
24. Thread cutting dies. IS : 1859 – 1961
25. Metric screw threads (Metric thread pitch-gauges) IS : 4211 – 1967
26. Dial gauges. IS : 2092 – 1962
27. Hexagonal bolts and nuts. IS : 2038 – 1968
28. Feeler gauges (m.m. ranges). IS : 3179 – 1976
29. Spanners, open jaw. IS : 2028 – 1968
30. Thickness of sheet & diameters of wire IS : 1137 – 1950
31. Centre drills. IS : 6703 – 1977
32. Lathe, sizes for general purpose. IS : 2392 – 1963
33. Recommendations for tapping drill sizes. IS : 3230 – 1970
34. Needle files. IS : 3152 – 1965
35. Plain plug gauges. IS : 6137 – 1871
36. Plain ring gauges (Go) IS : 3435 – 1972
37. Snap gauges (Go & No Go) IS : 3477 – 1973
38. Slip gauges. IS : 2984 – 1966
39. Ball & roller Bearings gauging practice for. IS : 4025 – 1967
40. V-belt for Industrial purposes. IS : 2404 – 1974
41. Limits & fits for engineering, recommendations for IS : 919 – 1963
42. Plain limit gauges tolerances for. IS : 3455 – 1971
43. Rivets for general purposes. IS : 2155 – 1961
44. Tapers for general engineering purposes. IS : 3458 – 1966
45. General Engineering drawing. IS : 696 –