Scribd
Upload
92 views2 pages

CF Internal Fault Map Class 1A

This document contains a list of fault codes for the RBS 6000, divided into two classes: Class 1A faults include resets from automatic recovery, power on, switches, or watchdog failures as well as faults involving timing units, corrupted databases, hardware and software inconsistencies, and high temperatures. Class 2A faults involve issues like exceeded VSWR limits, diversity and timing bus faults, missing loadfiles, sensor faults, high temperatures, low voltages, incompatible hardware, and lost communication between components. Several faults indicate degraded performance or loss of service due to environmental conditions.

Uploaded by

cesar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
92 views2 pages

CF Internal Fault Map Class 1A

This document contains a list of fault codes for the RBS 6000, divided into two classes: Class 1A faults include resets from automatic recovery, power on, switches, or watchdog failures as well as faults involving timing units, corrupted databases, hardware and software inconsistencies, and high temperatures. Class 2A faults involve issues like exceeded VSWR limits, diversity and timing bus faults, missing loadfiles, sensor faults, high temperatures, low voltages, incompatible hardware, and lost communication between components. Several faults indicate degraded performance or loss of service due to environmental conditions.

Uploaded by

cesar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 2

List of CF Fault Code RBS 6000

CF Internal Fault Map Class 1A

CF I1A:0 - Reset, Automatic Recovery


CF I1A:1 - Reset, Power On
CF I1A:2 - Reset, Switch
CF I1A:3 - Reset, Watchdog
CF I1A:4 - Reset, SW Fault
CF I1A:5 - Reset, RAM Fault
CF I1A:6 - Reset, Internal Function Change
CF I1A:8 - Timing Unit VCO Fault
CF I1A:9 - Timing Bus Fault
CF I1A:15 - IDB Corrupted
CF I1A:16 - RU Database Corrupted
CF I1A:17 - HW and IDB Inconsistent
CF I1A:18 - Internal Configuration Failed
CF I1A:19 - HW and SW Inconsistent
CF I1A:21 - HW Fault
CF I1A:22 - Air Time Counter Lost
CF I1A:24 - Temperature Close to Destructive Limit

CF Internal Fault Map Class 2A

CF I2A:8 - VSWR Limits Exceeded


CF I2A:12 - RX Maxgain/Mingain Violated
CF I2A:13 - Timing Unit VCO Ageing
CF I2A:13 - Timing Unit VCO Ageing
CF I2A:16 - Indoor Temp Out of Normal Conditional Range
CF I2A:19 - Power and Climate System in Standalone Mode
CF I2A:22 - Battery Backup Capacity Reduced
CF I2A:23 - Climate Capacity Reduced
CF I2A:24 - HW Fault
CF I2A:25 - Loadfile Missing in DXU or ECU
CF I2A:26 - Climate Sensor Fault
CF I2A:30 - Bus Fault
CF I2A:31 - High Frequency of Software Fault
CF I2A:33 - RX Diversity Lost
CF I2A:34 - Output Voltage Fault
CF I2A:36 - RU Database Corrupted
CF I2A:38 - Default Values Used
CF I2A:41 - Lost Communication to TRU
CF I2A:43 - Internal Configuration Failed
CF I2A:45 - High Temperature
CF I2A:46 - DB Parameter Fault
CF I2A:47 - Antenna Hopping Failure
CF I2A:48 - GPS Synch Fault
CF I2A:50 - RBS Running on Battery
CF I2A:51 - TMA Supervision/Communications Lost
CF I2A:53 - HW and IDB Inconsistent
CF I2A:54 - Timing Bus Fault
CF I2A:57 - RX Path Imbalance
CF I2A:58 – Disconnected
CF I2A:59 - Operating Temperature Too High, Main Load
CF I2A:60 - Operating Temperature Too High, Battery
CF I2A:61 - Operating Temperature Too High, Capacity Reduced
CF I2A:62 - Operating Temperature Too Low, Capacity Reduced
CF I2A:63 - Operating Temperature Too High, No Service
CF I2A:64 - Operating Temperature Too Low, Communication lost
CF I2A:65 - Battery Voltage Too Low, Main Load Disconnected
CF I2A:66 - Battery Voltage Too Low, Prio Load Disconnected
CF I2A:67 - System Undervoltage
CF I2A:68 - System Overvoltage
CF I2A:69 - Cabinet Product Data Mismatch
CF I2A:70 - Battery Missing
CF I2A:71 - Low Battery Capacity
CF I2A:72 - Software Load of RUS Failed
CF I2A:73 - Degraded or Lost Communication to Radio Unit
CF I2A:79 - Configuration Fault of CPRI System
CF I2A:80 - Antenna System DC Power Supply Overloaded
CF I2A:81 - Primary Node Disconnected
CF I2A:82 - Radio Unit Incompatible
CF I2A:83 - Radio Unit Connection Fault

You might also like