V2-212S DUAL 12-INCH

SUBWOOFER SYSTEM

SPECIFICATIONS

Dual driver subwoofer, rectangular,

Loudspeaker Type:
vented bass

Operating Range: 37 Hz to 500 Hz (-10 dB)

Frequency Response: 50 Hz to 125 Hz (-3 dB)

300W continuous, 750W program

Max Input Ratings:
34.6 volts RMS, 69.3 volts momentary peak

Sensitivity (1W/1m): 98 dB (50 Hz to 200 Hz) half space APPLICATIONS

Maximum Output: 123 dB SPL / 129 dB SPL (peak) Fitness centers
Nightclubs
Nominal Impedance: 4 ohms
Bars and restaurants
Minimum Impedance: 4.2 ohms @ 110 Hz Houses of worship
Theaters
Nominal –6dB
Beamwidth:
360° H x 180° V Themed attractions

Recommended Signal
40 Hz, 24 dB/octave high pass filter FEATURES
Processing:
Low profile design fits tight spaces
Drivers: LF 2 x 12-inch
DYNA-TECH™ driver protection circuitry
Driver Protection: DYNA-TECH protection circuitry Patented Cool-Coil™ heat evacuation technology to minimize
cone driver power compression
NL4-compatible locking connector with
Input Connection: Eight M10 threaded rigging fittings (four on each end panel)
terminal strip in parallel
Terminal strip and NL4-compatible connectors
Controls: None Available in standard black or white finishes
Enclosure: 18mm, 11-ply cross-laminated birch
DESCRIPTION
Mounting/Rigging
8 x M10 threaded rigging fittings The V2-212S is a low-profile, dual-driver subwoofer system
Provisions:
designed to augment and extend the low frequency output of
Catalyzed polyester two-part paint, any VERIS 2 full-range loudspeaker system. Powerful and low
Finish:
black or white in distortion, the V2-212S produces authoritative low frequency
output. The result is a deep, but punchy sonic signature that
Grille: Powder coated steel, black or white finish can handle most any musical style with ease. Solidly
Required Accessories: None
constructed of cross-laminated birch plywood, this subwoofer
provides an accurate acoustic response uncolored by enclosure
Supplied Accessories: Rubber feet, black (4) resonance. Its small size makes it a perfect fit for jazz clubs,
bars, restaurants, worship centers, AV presentations, and other
M10EYBLTKIT 10mm eyebolt kit applications that require extended bass, but do not have the
Optional Accessories:
STKIT seat track kit space available to install larger, bulkier systems.
Dimensions—Height: 13.9 inches (354 mm) - not including feet The enclosure may be suspended from its M10 threaded rigging
Width: 35.9 inches (912 mm) points, or simply located on the floor. As with all subwoofers, a
Depth: 17.9 inches (455 mm) corner placement is recommended when possible, in order to
take advantage of the acoustical boundary effect for the highest
Weight: 70 lbs (31.8 kg)
possible efficiency. The V2-212S includes Community’s
V2-212SB (black finish) exclusive DYNA-TECH™ driver protection circuitry to protect
Model Options: against abusive operating conditions, and also features
V2-212SW (white finish)
Community’s patented Cool-Coil™ heat evacuation technology
to minimize cone driver power compression and ensure long-
term reliability.
NOTES:
1. Sensitivity: Free field pink noise measurement at 6ft (1.8m) at 10% power; The V2-212S is a versatile performer for applications requiring
extrapolated to 1 meter and an input of 2.83 volts RMS. high quality, high power, and extended low frequency response
2. Watts: All wattage figures are calculated using the rated nominal impedance. at a reasonable cost.
3. Sensitivity: Subwoofers measurements are performed half-space.

VERIS 2
V2-212S DUAL 12-INCH
SUBWOOFER SYSTEM

FREQUENCY RESPONSE

IMPEDANCE

DIMENSIONS
35.918" [912.32]
FRONT

17.918" [455.12]

FRONT TOP BOTTOM

3.000" [76.2]
2.000" [50.79]
M10 HANG
14.418" [366.22] PORT POINTS

13.918" CG
[353.52] 6.959"
FRONT [176.75]

2.000" [50.79] BACK

FRONT
8.959" [227.56] 1.750"
[44.45]
SIDE

ARCHITECTURAL SPECIFICATIONS
The loudspeaker system shall be a low frequency, rectangular, vented bass, dual 12-inch driver subwoofer. There shall be an NL4-
compatible locking connector with terminal strip in parallel. The loudspeaker enclosure shall be constructed of 18mm, 11-ply cross
laminated birch with a perforated steel grille and shall be fitted with eight M10 flying/rigging inserts, four (4) on each end panel. The
system shall have an amplitude response of 37 Hz to 500 Hz (-10 dB) and input capability of 34.6V RMS. The sensitivity at 1W/1m
shall be 98 dB between 50 Hz to 200 Hz (half-space) at a nominal 4 ohm impedance. The nominal dispersion shall be 360° H x 180° V
over its usable frequency range. The dimensions of the enclosure are defined as 13.9 in. (354 mm) H x 35.9 in. (912 mm) W x 17.9 in.
(455 mm) D at a weight of 70 lbs (31.8 kg).

Community strives to improve its products on a continual basis. Specifications are therefore subject to change without notice.

Community Professional Loudspeakers, 333 East Fifth Street, Chester, PA 19013-4511 USA
610-876-3400 · Fax 610-874-0190 · [email protected] · www.communitypro.com V2-212S [16AUG2012]