FA - PA Works Wo Revised Boq
FA - PA Works Wo Revised Boq
1
All items of work under this Contract shall be executed strictly to fulfill the requirements laid down under “Basis of Design” in the specifications.
Type of equipment, material specification, methods of installation and testing and type of control shall be in accordance with the specifications,
approved shop drawings and the relevant Indian Standards, however capacity of each component and their quantities shall be such as to fulfill
the above mentioned requirement.
2 The rate for each item of work included in the Schedule of Quantities shall, unless expressly stated otherwise, include cost of :
a All materials, fixing materials, accessories, appliances tools, plants, equipment, transport, labour and incidentals required in preparation for and
in the full and entire execution, testing, balancing, commissioning and completion of work called for in the item and as per Specifications and
Drawings.
c Loading, transporting, unloading, handling/double handling, hoisting to all levels, setting, fitting and fixing in position, protecting, disposal of
debris and all other labour necessary in and for the full and entire execution and for the job in accordance with the contract documents, good
practice and recognize principles.
e All requirements of Specifications, whether such requirements are mentioned in the item or not. The Specifications and Drawings where
available, are to be read as complimentary to and part of the Schedule of Quantities and any work called for in one shall be taken as required for
all.
f In the event of conflict between Schedule of Quantities and other documents including the Specifications, the most stringent shall apply. The
interpretation of the Architect / Engineer shall be final and binding.
3
All equipments, quantities and technical data indicated in this Schedule are for the Contractor’s guidance only, these are based on the
documents prepared by the Services Consultant. This schedule must be read in conjunction with other documents. The Contractor shall be paid
for the actual quantity of work executed by him in accordance with the approved Shop Drawings at the contract rates.
4
This Schedule shall be fully priced and the extensions and totals duly checked. The rates for all items shall be filled in INK including NIL items.
5
No alteration whatsoever is to be made to the text or quantities of this Schedule unless such alteration is authorised in writing by Services
Consultant. Any such alterations, notes or additions shall, unless authorized in writing, be disregarded when tender documents are considered.
6 In the event of an error occurring in the amount of the Schedule, as a result of wrong extension of the unit rate and quantity, the unit rate
quoted by the tenderer shall be regarded as firm and the extensions shall be amended on the basis of rates.
7 Any error in totaling in the amount column and in carrying forward total shall be corrected. Any error, in description or in quantity, omission of
items from this Schedule shall not vitiate this Contract but shall be corrected and deemed to be variation required by the Services
Consultant/Project Manager.
8 The Contractor shall procure and bring Materials/Equipment to the site only on the basis of drawings approved for construction and shop
drawings and not on the basis of Schedule of Quantities which are approximate only. This also applies to the Contractor’s requisition for Owner
supplied materials.
9 The unit rate for all local equipment or materials (not being procured against duty benefit) in Indian Rupees shall include cost of equipment and
materials including all taxes and duties and also including forwarding, freight, insurance and transport into Contractor’s store at site, storage,
installation, testing, balancing, commissioning and other works required.
10 The rates for item being procured against duty benefit shall be quoted under following heads.
TYPE OF WORK : WITH MATERIALS WORKS
Multi Loop Microprocessor based xx loop (each loop shall be able to connect
minimum 125 detectors and 125 modules) intelligent ,analogue addressable type
fire alarm control panel with minimum 80 character LCD display, four access levels,
400 event historical logging, flash EPROM sufficient numbers of programmable
relay controls, 240 volts AC power supply, automatic battery charger, 24 volts
sealed lead acid batteries sufficient for 48 hours normal working and then be
capable of operating the system for 30 Minutes during an emergency
1.1 condition including all necessary software for remote programming of fire alarm
system through central control station. Panel should be integrated with phase-1A
panel. All the panel should be networkable on decicated fire alarm network
through Copper connectivity cable vendor to considerate the necessary
accessories , module to take all the panel in networking & to make the system
functional .
(Location - FACP panel will be located at Fire Control Room , Podium -1 & NTA
FACP will be kept in D wing Fire Control Room)
a 10 loops No. 1 R.O. R.O. R.O. R.O. R.O. R.O. 1 540,000.00 540,000.00
b 6 loops No. R.O. 1 R.O. R.O. 1 R.O. R.O. 2 490,000.00 980,000.00
c 4 loops No. R.O. R.O. R.O. R.O. R.O. R.O. R.O. R.O. 400,000.00
d 2 loops No. 1 R.O. R.O. R.O. R.O. R.O. R.O. 1 179,550.00 179,550.00
1.3 Fire work station as per specification for the Above mention GUI software. No R.O. R.O. R.O. R.O. R.O. R.O. R.O. R.O. 41,400.00
Networkable Repeater panel with 40 character back lite super twist LCD display
1.4 with system function keys like system reset. Alarm acknowledge, Alarm Silence, 1 1 1 1 1 1 7 54,000.00 378,000.00
Trouble Acknowledge etc. Quoted price (Location of Repeater panel :Entrance No 1
Lobby of Each Tower , Main Security Gate )
1.7 Intelligent Analogue addressable photoelectric type smoke detector with R.O. 238 21 66 238 21 66 650 2,611.00 1,697,150.00
No.
mounting base, LED, intelligent address complete as per specifications
Intelligent addressable rate of rise cum fixed temperature heat detector with
1.8 mounting base, LED, intelligent address complete as per specifications No. 1317 R.O. R.O. R.O. R.O. R.O. R.O. 1317 2,074.00 2,731,458.00
1.9 Intelligent addressable type Multicriteria type detector with mounting base, LED, R.O. R.O. R.O. R.O. R.O. R.O. 155 3,106.00 481,430.00
intelligent address Complete as per specifications(AFC & BFC) No. 155
1.10 Addressable Gas Leak Detector with required accessories such as power suuply if R.O. 247 28 66 247 28 66 682 1,701.00 1,160,082.00
required etc. No.
1.11 Standalone Gas Leak Detector with required accessories such as power suuply if R.O. R.O. R.O. R.O. R.O. R.O. R.O. R.O. 2,800.00
required etc. No.
1.12 Addressable Monitor modules monitor status like Gas leak Detector applications R.O. 247 28 66 247 28 66 682 1,795.00 1,224,190.00
as per specifications No.
1.13 Addressable type dual action manual Pull Station unit as per specifications No. 40 86 7 22 86 7 22 270 2,244.00 605,880.00
Surface mounted addressable type fully solid state circuitory dual tone Electronic
1.14 loud speaker type hooters with strobe lights of 110 Cd intensity as per No. 76 86 7 22 86 7 22 306 3,240.00 991,440.00
specifications
1.15 Addressable Fault Isolation Module as per specifications No. 109 43 7 11 43 7 11 231 2,250.00 519,750.00
1.16 Response Indicator as per Specification No. R.O. 10 R.O. R.O. 10 R.O. R.O. 20 150.00 3,000.00
1.17 Auto Dialer unit as per Specification No. 1 R.O. R.O. R.O. R.O. R.O. R.O. 1 9,000.00 9,000.00
1.18 Magnetic Door Contact along with Monitor Modules as per Specification No. R.O. 4 2 2 4 3 3 18 2,100.00 37,800.00
1.19 Telephone jack along with Control Modules as per Specification No. 40 86 7 22 86 7 22 270 3,105.00 838,350.00
Standalone UPS with 15 min. Battery backup. The Contractor to confirm the
capacity of UPS for giving power supply for all control room equipment in IBMS
room & Field levels as mention below such as workstation,System Integration
1.21 Unit,Gateways/Switch ,Fire panel & Workstation, PA System Rack, Hooter Power R.O. 1 R.O. R.O. 1 R.O. R.O. 2 315,000.00 630,000.00
supply,Workststions screens at all levels etc. Contractor should mention the Set.
capacity of the UPS selected with calculations at the time of quoting the tender
vendor to considered 20% spare capacity above actual load in the UPS. (UPS FOR
Each wing located at Fire Control Room , Podium -1 )
Note - From UPS to floor level UPS DB & to Socket (UPS point) near to IBMS
equipments (field devices & Panels), Power supply etc. will be in electrical vendor
scope (Electrical Vendor to provide Cabling to socket ,DB etc.for IBMS field
equipments such as hooter power supply, workstations etc.) IBMS Vendor to share
the all the IBMS equipment required UPS power point layout to electrical vendor
for execution as per approved design.
Audio amplifiers & Controllers Routers etc including all necessary control desk
and microprocessor based control unit with microphone, BGM, Call Station & PC
input including providing necessary rack for mounting the Amplifier.Contractor to
decide on the number, depending upon his amplifiers capacity. Vendor shall
1.1 calculate related controller, router, call station and keypad. (Contractor shall Set 1 1 1 1 1 1 1 7 27,000.00 189,000.00
furnish quantity and unit rate for each type of amplifier considered by him.)
(Location - FACP panel will be located at Fire Control Room , Podium -1 & NTA
FACP will be kept in D wing Fire Control Room). Amplifier selection shall be at full
load rating
1.2 6 W Ceiling Mounted Speaker with Multi Tapping Feature. Nos. 40 129 21 44 129 21 44 428 694.00 297,032.00
1.3 6 W Wall Mounted Box Type Vendal Proof Cabinet speakers with Multi Tapping 86 7 22 86 7 22 306 1,035.00 316,710.00
Feature. Nos. 76
1.4 15 W Wall Mounted Type Horn Type Speaker with Multi Tapping Feature. Nos. 178 R.O. R.O. R.O. R.O. R.O. R.O. 178 1,715.00 305,270.00
Integrated music source consisting of CD player, tape deck etc for Voice Evacuation
1.6 & Back Ground Music (should be capable of playing MP3,VCD,CD).as per Set R.O. 1 R.O. R.O. 1 1 R.O. 3 2,700.00 8,100.00
specifcation
AECOM INDIA PVT. LTD., MUMBAI SQ-4 Contractor's Signture
NODD12032-LV-06-0000-00_00 – Residential Project at Borivali, Mumbai : SOQ for FAS & PA System
UNIT RATE (Rs.)
ITEM. ITEM DESCRIPTION UNIT AMOUNT
NO. A B C D E F TOTAL SUPPLY INSTALLATION TOTAL (Rs.)
NTA Wing Wing Wing Wing Wing Wing
1.7 Car Calling system as per specifcation Set R.O. R.O. R.O. R.O. R.O. R.O. R.O. R.O. 100,000.00
a. 40 x 300 x 40 Mtrs. 50 R.O. R.O. R.O. R.O. R.O. R.O. 50 1,530.00 76,500.00
b. 40 x 200 x 40 Mtrs. 50 R.O. R.O. R.O. R.O. R.O. R.O. 50 1,170.00 58,500.00
c. 25 x 150 x 25 Mtrs. R.O. R.O. R.O. R.O. R.O. R.O. R.O. R.O. 990.00
CGST 9% 2,106,000.05
SGST 9% 2,106,000.05
The rate of each item of work for Fire Detection and Alarm System & PA shall also include the following :
1. All materials, fixing materials, accessories, appliances, tools and equipment.
2. Approved cover plates for inspection, junction and outlet boxes.
3. 2 mm thick outlet boxes and junction boxes.
4. All fixing accessories such as clips, nails, screws etc.
5. Providing and fixing approved saddles, hooks and grouting the same as required, in the case of all exposed cable work.
6. Embedding cables and accessories in wall, floors etc. during construction and / or cutting chases and making good as in the case of all concealed cables work.
7. Testing and commissioning of each device, circuit as per the requirements of NFPA 72, TAC, local authorities and to be witnessed by the PMC / Architect / Consultant.
54000
52202
621418
420147
443365
192984
278640
96750
1500
8400
267030
10900
27000
89526
89010
72900
2700
5577554
Multi Loop Microprocessor based xx loop (each loop shall be able to connect
minimum 125 detectors and 125 modules) intelligent ,analogue addressable type
fire alarm control panel with minimum 80 character LCD display, four access levels,
400 event historical logging, flash EPROM sufficient numbers of programmable
relay controls, 240 volts AC power supply, automatic battery charger, 24 volts
sealed lead acid batteries sufficient for 48 hours normal working and then be
capable of operating the system for 30 Minutes during an emergency
1.1 condition including all necessary software for remote programming of fire alarm
system through central control station. Panel should be integrated with phase-1A
panel. All the panel should be networkable on decicated fire alarm network
through Copper connectivity cable vendor to considerate the necessary
accessories , module to take all the panel in networking & to make the system
functional .
(Location - FACP panel will be located at Fire Control Room , Podium -1 & NTA
FACP will be kept in D wing Fire Control Room)
1.3 Fire work station as per specification for the Above mention GUI software. No R.O. 41,400.00
Networkable Repeater panel with 40 character back lite super twist LCD display
1.4 with system function keys like system reset. Alarm acknowledge, Alarm Silence, 1 54,000.00 54,000.00
Trouble Acknowledge etc. Quoted price (Location of Repeater panel :Entrance No
Lobby of Each Tower , Main Security Gate )
1.5 Addressable Monitor modules monitor status like flow Switch,Tamper Switch in 75 1,214.00 91,050.00
Fire fighting & other applications as per specifications No.
Adressable Control modules for Fans Tripping & activating smoke extract fans
1.6 ,Elevator recall, fire damper, Pressurization fan Liftwell & Stairwell , PA system, etc. No. 40 2,187.00 87,480.00
As per specification
1.8 Intelligent addressable rate of rise cum fixed temperature heat detector with 1317 2,074.00 2,731,458.00
mounting base, LED, intelligent address complete as per specifications No.
1.9 Intelligent addressable type Multicriteria type detector with mounting base, LED, 155 3,106.00 481,430.00
intelligent address Complete as per specifications(AFC & BFC) No.
1.10 Addressable Gas Leak Detector with required accessories such as power suuply if 0 1,701.00 -
required etc. No.
1.11 Standalone Gas Leak Detector with required accessories such as power suuply if R.O. 2,800.00
required etc. No.
1.12 Addressable Monitor modules monitor status like Gas leak Detector applications 0 1,795.00 -
as per specifications No.
1.13 Addressable type dual action manual Pull Station unit as per specifications No. 40 2,244.00 89,760.00
Surface mounted addressable type fully solid state circuitory dual tone Electronic
1.14 loud speaker type hooters with strobe lights of 110 Cd intensity as per No. 76 3,240.00 246,240.00
specifications
1.15 Addressable Fault Isolation Module as per specifications No. 109 2,250.00 245,250.00
1.18 Magnetic Door Contact along with Monitor Modules as per Specification No. 0 2,100.00 -
1.19 Telephone jack along with Control Modules as per Specification No. 40 3,105.00 124,200.00
Standalone UPS with 15 min. Battery backup. The Contractor to confirm the
capacity of UPS for giving power supply for all control room equipment in IBMS
room & Field levels as mention below such as workstation,System Integration
1.21 Unit,Gateways/Switch ,Fire panel & Workstation, PA System Rack, Hooter Power 0 315,000.00 -
supply,Workststions screens at all levels etc. Contractor should mention the Set.
capacity of the UPS selected with calculations at the time of quoting the tender
vendor to considered 20% spare capacity above actual load in the UPS. (UPS FOR
Each wing located at Fire Control Room , Podium -1 )
Note - From UPS to floor level UPS DB & to Socket (UPS point) near to IBMS
equipments (field devices & Panels), Power supply etc. will be in electrical vendor
scope (Electrical Vendor to provide Cabling to socket ,DB etc.for IBMS field
equipments such as hooter power supply, workstations etc.) IBMS Vendor to share
the all the IBMS equipment required UPS power point layout to electrical vendor
for execution as per approved design.
Audio amplifiers & Controllers Routers etc including all necessary control desk
and microprocessor based control unit with microphone, BGM, Call Station & PC
input including providing necessary rack for mounting the Amplifier.Contractor to
decide on the number, depending upon his amplifiers capacity. Vendor shall
1.1 calculate related controller, router, call station and keypad. (Contractor shall Set 1 27,000.00 27,000.00
furnish quantity and unit rate for each type of amplifier considered by him.)
(Location - FACP panel will be located at Fire Control Room , Podium -1 & NTA
FACP will be kept in D wing Fire Control Room). Amplifier selection shall be at full
load rating
1.2 6 W Ceiling Mounted Speaker with Multi Tapping Feature. Nos. 40 694.00 27,760.00
1.3 6 W Wall Mounted Box Type Vendal Proof Cabinet speakers with Multi Tapping 76 1,035.00 78,660.00
Feature. Nos.
1.4 15 W Wall Mounted Type Horn Type Speaker with Multi Tapping Feature. Nos. 178 1,715.00 305,270.00
1.5 Announcement console complete with microphone and Zone selection as per 0 72,900.00 -
Specifications ( Security Room,Each Fire Control Room At Podium Floor) Set
Integrated music source consisting of CD player, tape deck etc for Voice Evacuation
1.6 & Back Ground Music (should be capable of playing MP3,VCD,CD).as per Set 0 2,700.00 -
specifcation
CGST 9% 781,197.17
SGST 9% 781,197.17
The rate of each item of work for Fire Detection and Alarm System & PA shall also include the following :
1. All materials, fixing materials, accessories, appliances, tools and equipment.
2. Approved cover plates for inspection, junction and outlet boxes.
3. 2 mm thick outlet boxes and junction boxes.
4. All fixing accessories such as clips, nails, screws etc.
5. Providing and fixing approved saddles, hooks and grouting the same as required, in the case of all exposed cable work.
6. Embedding cables and accessories in wall, floors etc. during construction and / or cutting chases and making good as in the case of all concealed cables work.
7. Testing and commissioning of each device, circuit as per the requirements of NFPA 72, TAC, local authorities and to be witnessed by the PMC / Architect / Consultant.
Wintergreen / Podium / FA PA System / BOQ 15 Contractor's Signature