Scribd
Upload
77 views

Structural Analysis & Design

This document summarizes the proposed structural analysis and design for renovating a two-story residential building located in Carmen, Cagayan de Oro City. It outlines the design loads, unit weights of materials, design material stresses, soil pressure, and load combinations to be used. The loads include dead, live, seismic and wind loads. Materials include concrete with a compressive strength of 20.7 MPa, reinforcing steel bars with a yield strength of 276 MPa, and steel with a yield stress of 250 MPa. The soil bearing pressure is 150 kPa. Load combinations are listed according to the National Structural Code of the Philippines 6th Edition.

Uploaded by

Tsada Deal
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
77 views

Structural Analysis & Design

This document summarizes the proposed structural analysis and design for renovating a two-story residential building located in Carmen, Cagayan de Oro City. It outlines the design loads, unit weights of materials, design material stresses, soil pressure, and load combinations to be used. The loads include dead, live, seismic and wind loads. Materials include concrete with a compressive strength of 20.7 MPa, reinforcing steel bars with a yield strength of 276 MPa, and steel with a yield stress of 250 MPa. The soil bearing pressure is 150 kPa. Load combinations are listed according to the National Structural Code of the Philippines 6th Edition.

Uploaded by

Tsada Deal
Copyright
© © All Rights Reserved
Available Formats
Download as DOC, PDF, TXT or read online on Scribd
You are on page 1/ 2

PROJECT : PROPOSED TWO STOREY RESIDENTIAL BLDG.

RENOVATION
LOCATION : BELLEVUE SUBD., CARMEN, CAGAYAN DE ORO CITY
OWNER : MR. & MRS. JOHN SANTANDER

STRUCTURAL ANALYSIS & DESIGN


I – DESIGN LOADS :

A.) DEAD LOAD :


CEILING & UTILITIES 0.48 KN/SQ.M.
CHB PARTITIONS 2.73 KN/SQ.M.
FLOOR FINISH & TOPPINGS 1.20 KN/SQ.M.
ROOF DEAD LOAD 0.40 KN/SQ.M.
FLOOR JOIST @ 300mm SPACING 0.30 KN/SQ.M.
HARDWOOD FLOORING 0.19 KN/SQ.M.
WOOD PARTITION 0.96 KN/SQ.M.
WINDOWS, GLASS, FRAMES 0.36 KN/SQ.M.

B.) LIVE LOAD:


ROOF LIVE LOAD 1.00 KN/SQ.M.
FLOOR LOAD(RESIDENTIAL) 2.00 KN/SQ.M.
STAIR 4.80 KN/SQ.M.
ROOF DECK(SAME AS OCCUPANCY)

C.) SEISMIC LOAD :


ZONE FACTOR 0.40
IMPORTANCE FACTOR 1.00
Rw 8.5
Na 1.0
Nv 1.0
Soil Type 4.0
D.) WIND LOAD
Wind Speed 200 Kph
Category IV
Exposure B
Buildings

II – UNIT WEIGHT OF MATERIALS:


CONCRETE 24.00 KN/CU.M.

III – DESIGN MATERIALS STRESSES:


COMPRESSIVE STRENGTH OF CONC. Fc” = 20.70 MPa
YIELD STRENGTH OF RSB fy = 276 MPa
YIELD STRESS OF STEEL Fy = 250 MPa
MODULUS ELASTICITY OF STEEL 200,000 MPa

IV – SOIL PRESSURE:
SOIL BEARING 150 KPa
LOAD COMBINATION:

As per Section 409.30 of the NSCP 6th Edition

1.40 Dead Load (409-1)


1.508 Dead Load + 1.40 Earthquake + Live Load (409-5)
1.208 Dead Load + 1.40 Earthquake Load (409-7)

As per Section 426.409.2 of the NSCP2010 6th Edition

1.358 Dead Load + 1.275 Live Load + 1.40 Earthquake (426-2)

PREPARED BY: APPROVED:

Jimoel Galon Mr. & Mrs. John Santander


Civil Engineer Owner
PRC: 0126517

You might also like