Scribd
Upload
91 views

Mi Wi-Fi Router 3C: Setup Guide Using Web Browser

This document provides setup instructions for the Mi Wi-Fi Router 3C using a web browser. It outlines steps for setting up the router as either a primary router or secondary router. When used as a primary router, the user connects the router to the internet, logs into the router's web interface, enters their ISP credentials, sets the admin password and Wi-Fi network, and chooses their location. When used as a secondary router, the user chooses between wired or wireless amplifier mode and follows steps to sync the router with an existing network.

Uploaded by

supriya sri
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
91 views

Mi Wi-Fi Router 3C: Setup Guide Using Web Browser

This document provides setup instructions for the Mi Wi-Fi Router 3C using a web browser. It outlines steps for setting up the router as either a primary router or secondary router. When used as a primary router, the user connects the router to the internet, logs into the router's web interface, enters their ISP credentials, sets the admin password and Wi-Fi network, and chooses their location. When used as a secondary router, the user chooses between wired or wireless amplifier mode and follows steps to sync the router with an existing network.

Uploaded by

supriya sri
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 8

Mi Wi-Fi Router 3C

Setup Guide Using Web Browser

When setting up as a primary router:

1. Connect the Ethernet (RJ45) cable to the Internet port seen behind the router and
switch it on.
Now, connect to the router by logging on to www.miwifi.com

2. Enter the ISP provided credentials

a. If you remember your ISP provided username and password, please enter the
required details and click on ‘next’
Mi Wi-Fi Router 3C
Setup Guide Using Web Browser

b. Else, you can also import the settings from your previous router. Follow the
steps described in the image below and click on ‘Import from existing router’.

(Step 1)

(Step 2)

(Step 3)
Mi Wi-Fi Router 3C
Setup Guide Using Web Browser

(Step 4)

3. Mi 3C Router will now attempt connecting to the Internet with the settings imported.

Note: In case your connection type is DHCP, you won’t be required to either enter
the ISP provided username/password or import the configuration.
Mi Wi-Fi Router 3C
Setup Guide Using Web Browser

4. Set your router admin password

Please note: If you want the same password to be used for router admin control,
please select ‘same as Wi-Fi password’ and click on finish.

5. Choose your location from the options given under the drop down menu.

*You can keep the admin password same as Wi-Fi password. If you un-check this option,
you can set a different password for Wi-Fi as shown in the following step.
Mi Wi-Fi Router 3C
Setup Guide Using Web Browser

6. Set Wi-Fi network and password

7. You are all set! Happy Browsing.


Mi Wi-Fi Router 3C
Setup Guide Using Web Browser

When setting up as a secondary router:

1. Choose between Wired or Wireless amplifier modes

a. Setting up as a wired amplifier. Please follow the steps as described in the images below:
Mi Wi-Fi Router 3C
Setup Guide Using Web Browser

b. Setting up as a wireless amplifier. Please follow the steps as described in the images
below:

Note: If you choose wireless repeater mode, or if you do not insert the LAN cable in the
Mi router from the primary router, you will be redirected to this page:

1. Choose ‘Amplifier mode (extend existing Wi-Fi)’

2. Select the Wi-Fi network you wish to amplify and enter the required password
Mi Wi-Fi Router 3C
Setup Guide Using Web Browser

3. Once the two routers are synced, please setup new network name and password
to distinguish between the primary router and wireless repeater which in this case
is Mi Wi-Fi Router 3C.

4. You’re all set. Happy Browsing!

You might also like