Scribd Logo
Upload

Welcome to Scribd!

  • 1K views

    Ford Focus Door Seal TSB

    Uploaded by

    Tigau Florian
    This document provides instructions for repairing damage to the door weatherstrip on a 2011 Ford Focus. It describes two types of damage: 1) a slightly stripped or partially removed weatherstrip on the door underside, and 2) a partially removed weatherstrip in the area of the door latch. The repair instructions include preparing adhesive, cutting the fine wire if needed for the specific damage, applying adhesive to the weatherstrip, securing it in position on the door frame to dry fully before use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Ford Focus Door Seal TSB

    Uploaded by

    Tigau Florian
    1K views3 pages
    This document provides instructions for repairing damage to the door weatherstrip on a 2011 Ford Focus. It describes two types of damage: 1) a slightly stripped or partially removed weatherstrip on the door underside, and 2) a partially removed weatherstrip in the area of the door latch. The repair instructions include preparing adhesive, cutting the fine wire if needed for the specific damage, applying adhesive to the weatherstrip, securing it in position on the door frame to dry fully before use.

    Original Description:

    Ford Focus Door Seal TSB

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides instructions for repairing damage to the door weatherstrip on a 2011 Ford Focus. It describes two types of damage: 1) a slightly stripped or partially removed weatherstrip on the door underside, and 2) a partially removed weatherstrip in the area of the door latch. The repair instructions include preparing adhesive, cutting the fine wire if needed for the specific damage, applying adhesive to the weatherstrip, securing it in position on the door frame to dry fully before use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    1K views3 pages

    Ford Focus Door Seal TSB

    Uploaded by

    Tigau Florian
    This document provides instructions for repairing damage to the door weatherstrip on a 2011 Ford Focus. It describes two types of damage: 1) a slightly stripped or partially removed weatherstrip on the door underside, and 2) a partially removed weatherstrip in the area of the door latch. The repair instructions include preparing adhesive, cutting the fine wire if needed for the specific damage, applying adhesive to the weatherstrip, securing it in position on the door frame to dry fully before use.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 3

    Service Information:

    Damage symptoms of the door weatherstrip (Focus 2011.25 front door shown, all other similar)
    NOTE: It would not be possible that these two different damage symptoms (1 & 2) are called at
    same time.

    1: Slightly stripped off and partially removed front door weatherstrip on the door underside
    2: Partially removed front door weatherstrip in the area of the door latch

    Service Instruction:
    Attach the door weatherstrip to the door frame

    1: WARNING: Safety instructions of material equipment provided by the manufacturer must be


    observed.
    Prepare the repair adhesive kit. Refer to the manufacturer's directions.

    2: In reference to the damage symptom, the inside vulcanised fine wire should be cut.
    1: Bend the door weatherstrip to get access to the inside vulcanised fine wire.

    CAUTION: Do not damage the paint surface. The wire snap can audible be observed.

    2: Briefly cut through the fine wire.


    3: Range of separation for partially removed weatherstrips in the area of the door latch.
    4: Range of separation for partially removed weatherstrips on the door underside.
    ◦Clean and dry the repair area. It is not required to remove any remaining traces of adhesive
    from the door frame.
    3: NOTE: Allow the repair adhesive to dry (drying time ≥ 1 hour).
    Apply repair adhesive (see Parts Required) to the door weatherstrip (door underside shown,
    other repair areas similar).
    ◦Max. Ø of adhesive bead: 3 mm

    4: Place the door weatherstrip on the door frame in the correct position. Secure the door
    weatherstrip on the door frame using tape (door underside shown, other repair areas similar).
    5: NOTE: If the ambient temperature falls below 10°C, apply warm air (25°C) continuously.
    Press the door outer weatherstrip home for at least one minute in order to obtain complete
    adhesion (door underside shown, other repair areas similar).
    1: Using a suitable plastic roller to press-on the weatherstrip. make sure that equal pressure is
    applied to the component.
    2: Carefully check the correct position of the weatherstrip on the door frame.
    ◦Allow the repair adhesive to dry in reference to the manufacturers' directions but not less than 5
    hours.
    ◦Remove any used tape.

    6.If required, repeat steps 2 to 5 on the remaining doors.

    You might also like