DATA SHEET NO DTS-2"-19-100

PROJECT Block 5 - AL SHAHEEN FIELD Development

Data Sheet for Corrosion coupon

Tag No Refer index sheet for Data sheet-DTS-2"-19-100
Size range 2"
Reference P&IDs Refer index sheet for Data sheet-DTS-2"-19-100
Line No Refer index sheet for Data sheet-DTS-2"-19-100
Service( Main/Injection) Refer index sheet for Data sheet-DTS-2"-19-100
GENERAL REQUIREMENTS

Nace MR 0175 yes

Corrosion coupon Type Online Retrievable type,2" Fixed (Pipe Plug) Coupon Holder

Possible Mounting Position Ladder Strip coupon Holder

Manufacturer & Model no. By vendor
Main/Injection Line Pipe Class ED1
Main/Injection Line Class Rating CL 900
Design Code ASME B31.3/B16.5
PARAMETER

Design pressure (Barg) Refer index sheet for Data sheet-DTS-2"-19-100( Refer Sheet 2 of 3 of Appendix-2)
PROCESS

Operating pressure (Barg) Refer index sheet for Data sheet-DTS-2"-19-100( Refer Sheet 2 of 3 of Appendix-2)
Design temp. Min / Max (Deg.C) Refer index sheet for Data sheet-DTS-2"-19-100( Refer Sheet 2 of 3 of Appendix-2)
Operating Temperature Range Refer index sheet for Data sheet-DTS-2"-19-100( Refer Sheet 2 of 3 of Appendix-2)
Dimensional Standard Manufacture Standard
Access fittings 2" Flanged type and 1/2" side Tee Type with Bleed Valve
Plug Assembly Type Soild Plug
End Connections Flanged,RTJ to ASME B16.5
DESIGN

Size and Rating of Access Fitting End Flange 2"-Flanged,CL 900 RTJ to ASME B16.5
Size and Rating of Injection Quill End . 1/2" Flanged,CL 1500 RTJ to ASME B16.5
Maximum Pressure Drop VTA
Size Of Header Pipe (Inch) 18" 10"
Injection Quill Installation Dimension
Dimension "X" (mm) VTC VTC
Access Fitting Body ASTM A182 F44
MATERIALS( Note-3)

Injection Tube & Quill 6Mo-UNS 31254

Injection Nut Assembly/Checmical Injection Holder 6Mo-UNS 31254
Integral Spring Loaded Check valve 6Mo-UNS 31254
Primary Packing VTC
Seals/O-Ring VTC
Protective Cover 6Mo-UNS 31254
Pressure/Pneumatic test std ASME B31.3\Manufacture Standard
INSPECTION
TESTING &

Hydro test pressure (Barg) 1.5 x Design Pressure

NDE 100 % RT & MPT/LPT
Inspection & testing As per Manufacture Std
Material test certificate EN 10204 type 3.1
OTHERS

External painting As per SD-NOC-COR-350

Marking MSS SP-25 with Tag No. / Part No.
1. All Material shall be comply with Piping material class SD-NOC-PVV-112 .
2. VTA-Denotes Vendor to Advice and VTC-Denotes Vendor to Confirm.
3.Vendor to confirm Material suitability for the Fluid at design Temperature & Pressure and Environmental conditions.
4. A Stainless Steel(316) TAG showing Injection Quill TAG No. shall be permanently attached to the Injection Quill body.

5. Access fitting assembly shall permit safe, easy insertion and retrieval of Quil while under full operating pressure & temperature condition. Retrieval tools along with service valve shall be
provided by vendor. Vendor to specify retrival stroke length and space required for installation and online removal of injection quil
NOTES

6.Injection quill / tube shall be suitable for injection into Liquid lines. Injection quill / tube shall be 1/2" size with 45 degree cut at the bottom end. Vendor to submit the vibration analysis
(wake frequency calculation) which shows the suitability of the selected 1/2" size injection tube

7.Vendor to provide the dimension upto which the quill tube height can be adjusted at site. Dimension "X" may vary +/- 15mm depending on size of the Branch Fitting.

8.Dimension "X" shall be considered from face of the flanged access fitting to the centre of the header pipe.Vendor to calculate and specify the length of the quill tube.

9.Flange Finish shall be as per SD-NOC-PVV-145.

00 2-Apr-19 Issued For Review Selvamani Saravanan/Murugesan Baptiste Pierre

Revision Date Revision History Issued by Reviewed by Approved

 439780739.xls

DATA SHEET NO Index Sheet for Data sheet- DTS-2"-19-100

PROJECT Block 5 - AL SHAHEEN FIELD Development

Data Sheet for Chemical Injection Quil

Description
Process Design Main/Injection Line
P&ID Reference SP Tag Main Line no Op.Conditions
Conditions Fluid
P (barg) T(°C) P (barg) T(°C)
ASEHA-04-270012-0001 SPP-2"-19-100-ED1 ASEH-18"-PHS-330014-ED1 2.8 to 4.5 23 to 45 143.6 -15 / 82 Process Fluid/Chemicals

ASEHA-04-270012-0001 SPP-2"-19-101-ED1 ASEH-10"-PTS-330015-ED1 2.8 to 4.5 23 to 45 143.6 -10 / 82 Process Fluid/Chemicals

ASEHA-04-270013-0001 SPP-2"-19-102-ED1 ASEH-18"-PHS-330001-ED1 2.8 to 4.5 23 to 45 143.6 -15 / 82 Process Fluid/Chemicals

ASEHA-04-270013-0001 SPP-2"-19-103-ED1 ASEH-10"-PTS-330002-ED1 2.8 to 4.5 23 to 45 143.6 -10 / 82 Process Fluid/Chemicals
ASEHA-04-270024-0001 SPP-2"-19-104-ED1 ASEH-18"-PHS-330003-ED1 2.8 to 4.5 23 to 45 143.6 -15 / 82 Process Fluid/Chemicals
ASEHA-04-270024-0001 SPP-2"-19-105-ED1 ASEH-18"-PHS-330003-ED1 2.8 to 4.5 23 to 45 143.6 -15 / 82 Process Fluid/Chemicals
ASEHA-04-270024-0001 SPP-2"-19-106-ED1 ASEH-10"-PTS-340006-ED1 2.8 to 4.5 23 to 45 143.6 -10 / 82 Process Fluid/Chemicals
ASEHA-04-270024-0001 SPP-2"-19-107-ED1 ASEH-10"-PTS-340006-ED1 2.8 to 4.5 23 to 45 143.6 -10 / 82 Process Fluid/Chemicals
ASEHA-04-270024-0001 SPP-2"-19-108-ED1 ASEH-18"-PHS-330016-ED1 2.8 to 4.5 23 to 45 143.6 -15 / 82 Process Fluid/Chemicals

ASEHA-04-270024-0001 SPP-2"-19-109-ED1 ASEH-18"-PHS-330016-ED1 2.8 to 4.5 23 to 45 143.6 -15 / 82 Process Fluid/Chemicals

1. Other Process parameters such as flow rate, viscosity and density of fluids for calculating Wake frequency will be provided in Detail Engineeering.

01 28-May-19 Approved for Design saravanan Murugesan D Baptiste Pierre

00 2-Apr-19 Issued For Review saravanan Krishnakumar Baptiste Pierre

Revision Date Revision History Issued by Reviewed by Approved

2/21
 DATA SHEET NO. DTS-2"-19-110

PROJECT Block 5 - AL SHAHEEN FIELD Development

Data Sheet for Chemical Injection Quil

Tag No SPP-2"-19-110-AD1
Size range 2"
Reference P&IDs ASEHA-05-270007-0001
Line No ASEH-4"-DPS-500010-AD1
Service( Main/Injection) Closed Drain/Chemicals
GENERAL REQUIREMENTS

Nace MR 0175 yes

Online Retrievable type,2" Flanged,Access fitting Body with Heavy Protective cover, inte
Injection Quill Type
check Valve
Possible Mounting Position 12" Oclock
Manufacturer & Model no. By vendor
Main/Injection Line Pipe Class AD1/FM1
Main/Injection Line Class Rating CL 150 /CL 1500
Design Code ASME B31.3/B16.5
Design pressure (Barg) 10.3
PARAMETER
PROCESS

Operating pressure (Barg) 0.5

Design temp. Min / Max (Deg.C) -46/82

Operating Temperature Range 35-41

Dimensional Standard Manufacture Standard
Access fittings 2" Flanged type and 1/2" side Tee Type with Bleed Valve
Plug Assembly Type Soild Plug
End Connections Flanged,RF to ASME B16.5
DESIGN

Size and Rating of Access Fitting End Flange 2"-Flanged,CL 150 RF to ASME B16.5
Size and Rating of Injection Quill End . 1/2" Flanged,CL 1500 RTJ to ASME B16.5
Maximum Pressure Drop VTA
Size Of Header Pipe (Inch) 4"
Injection Quill Installation Dimension
Dimension "X" (mm) VTC
Access Fitting Body ASTM A182 F44
MATERIALS( Note-3)

Injection Tube & Quill 6Mo-UNS 31254

Injection Nut Assembly/Checmical Injection Holder 6Mo-UNS 31254
Integral Spring Loaded Check valve 6Mo-UNS 31254
Primary Packing VTC
Seals/O-Ring VTC
Protective Cover 6Mo-UNS 31254
Pressure/Pneumatic test std ASME B31.3\Manufacture Standard
INSPECTION
TESTING &

Hydro test pressure (Barg) 1.5 x Design Pressure

NDE 100 % RT & MPT/LPT
Inspection & testing As per Manufacture Std
Material test certificate EN 10204 type 3.1
OTHERS

External painting As per SD-NOC-COR-350

Marking MSS SP-25 with Tag No. / Part No.
1. All Material shall be comply with Piping material class SD-NOC-PVV-112.
2. VTA-Denotes Vendor to Advice and VTC-Denotes Vendor to Confirm.
3. Vendor to confirm Material suitability for the Fluid at design Temperature & Pressure and Environmental conditions.
4. A Stainless Steel(SS316) TAG showing Injection Quill TAG No. shall be permanently attached to the Injection Quill body.
5. Access fitting assembly shall permit safe, easy insertion and retrieval of Quil while under full operating pressure & temperature condition. Retrieval tools along with service valve
shall be provided by vendor. Vendor to specify retrival stroke length and space required for installation and online removal of injection quil
NOTES

6.Injection quill / tube shall be suitable for injection into Liquid lines. Injection quill / tube shall be 1/2" size with 45 degree cut at the bottom end. Vendor to submit the vibration
analysis (wake frequency calculation) which shows the suitability of the selected 1/2" size injection tube

7.Vendor to provide the dimension upto which the quill tube height can be adjusted at site. Dimension "X" may vary +/- 15mm depending on size of the Branch Fitting.

8.Dimension "X" shall be considered from face of the flanged access fitting to the centre of the header pipe.Vendor to calculate and specify the length of the quill tube.

9.Flange Finish shall be as per SD-NOC-PVV-145.

01 28-May-19 Approved for Design saravanan Murugesan D Baptiste Pierre

00 2-Apr-19 Issued For Review saravanan Krishnakumar Baptiste Pierre

Revision Date Revision History Issued by Reviewed by Approved

 SPP-2"-19-110-AD1
2"
ASEHA-05-270007-0001
ASEH-4"-DPS-500010-AD1
Closed Drain/Chemicals

Online Retrievable type,2" Flanged,Access fitting Body with Heavy Protective cover, integral
check Valve
12" Oclock
By vendor
AD1/FM1
CL 150 /CL 1500
ASME B31.3/B16.5
10.3
0.5

-46/82

35-41
Manufacture Standard
2" Flanged type and 1/2" side Tee Type with Bleed Valve

VTA

ASTM A182 F44

6Mo-UNS 31254
6Mo-UNS 31254
6Mo-UNS 31254

VTC
6Mo-UNS 31254
ASME B31.3\Manufacture Standard
1.5 x Design Pressure
100 % RT & MPT/LPT
As per Manufacture Std
EN 10204 type 3.1
As per SD-NOC-COR-350
MSS SP-25 with Tag No. / Part No.
.

e & Pressure and Environmental conditions.

permanently attached to the Injection Quill body.
Quil while under full operating pressure & temperature condition. Retrieval tools along with service valve
ace required for installation and online removal of injection quil

on quill / tube shall be 1/2" size with 45 degree cut at the bottom end. Vendor to submit the vibration
ected 1/2" size injection tube

adjusted at site. Dimension "X" may vary +/- 15mm depending on size of the Branch Fitting.

g to the centre of the header pipe.Vendor to calculate and specify the length of the quill tube.

Baptiste Pierre
Baptiste Pierre

Approved
 DATA SHEET NO DTS-3"-15-100

PROJECT
Block 5 - AL SHAHEEN FIELD
Development
Data Sheet for Strainer
Tag No SPP-3"-15-100-AM1,SPP-3"-15-101-AM1
Size range 3"
QTY 2 No
Reference P&IDs ASEHA-05-270007-0001
GENERAL REQUIREMENTS

Line No ASEH-3"-DPS-500012-AM1 & ASEH-3"-DPS-500013-AM1

Service Closed Drain
Nace MR 0175 yes
Manufacturer & Model no. By vendor
Pipe Class AM1
Class Rating CL 150
Design Code ASME B31.3/B36.19/B16.5
Fluid State Liquid
Density of Liquid 991.56
PROCESS PARAMETER

Viscosity of Liquid 33.32

Flow Rate (m3/hr) 8
DP at Max flow across dirty filter(Barg) 0.1(VTC)
DP at Max flow across Clean filter(Barg) 0.05(VTC)
Design pressure (Barg) 10.3
Operating pressure (Barg) 0.5
Design temp. Min / Max (Deg.C) -46 / 82
Operating Temperature Range 35-41
Strainer Type Y Type
Face to Face Dimension Manufacture Standard
Inlet ,Outlet and Y Branch Connection Flanged,ASME B 16.5,RF
DESIGN

Drain Connection 1/2" Flanged Tapping for Drain Fitted in 4" Blind Flange
Mesh Screen Size No VTA
Pressure Drop at Clean Condition VTC
Pressure Drop at Dirty Condition VTC
Screen Open Area VTC
Body A182 F44/A351 CK3MCuN
MATERIALS( Note-3)

Cover A182 F44(UNS 31254)

Screen /Filter Element A182 F44(UNS 31254)
Drain Plug / Blind Flange A182 F44(UNS 31254)
Spiral Wound,UNS S32750/60 Winding 4.8 mm Thick ,Thermiculite or Equivalent Filler,SS316 inner &
Gasket
Centering (VTC)
Bolting & Nuts As per Clause 6.3 of SD-NOC-PVV-155
Pressure/Pneumatic test std ASME B31.3\Manufacture Standard
INSPECTION
TESTING &

Hydro test pressure (Barg) 1.5 x Design Pressure

NDE 100 % RT & MPT/LPT
Inspection & testing As per Manufacture Std
Material test certificate EN 10204 type 3.1
OTHERS

External painting As per SD-NOC-COR-350

Marking MSS SP-25 with Tag No. / Part No.
1. All Material shall be comply with Piping material class SD-NOC-PVV-112.
2. VTA-Denotes Vendor to Advice and VTC-Denotes Vendor to Confirm.
3. Vendor to confirm Material suitability for the Fluid at design Temperature & Pressure and Environmental conditions.
NOTES

4.Flow Direction shall be Marked on the Body.

5. Vendor to Submit Press Drop calculation at Clean and clogged condition and Screen Open area Calculation.

01 28-May-19 Approved for Design saravanan Murugesan D Baptiste Pierre

00 2-Apr-19 Issued For Review saravanan Krishnakumar Baptiste Pierre

Revision Date Revision History Issued by Reviewed by Approved
 DATA SHEET NO DTS-6"-29-100

PROJECT Block 5 - AL SHAHEEN FIELD Development

Data Sheet for Flame Arrestor

Tag No SPP-6"-29-100-AR1 & SPP-6"-29-101-AR1
Size range 6"
QTY 2 No
Reference P&IDs ASEHA-05-270009-0001
GENERAL REQUIREMENTS

Line No ASEH-6”-FYS-500340-AR1 & ASEH-6”-FYS-500341-AR1

Service Open Drain tank Vent
Nace MR 0175 No
Manufacturer & Model no. By vendor
Pipe Class AR1
Class Rating CL 150
Design Code EN ISO 16852 /EN 12874
Design pressure (Barg) 2
Operating pressure (Barg) ATM
Design temp. Min / Max (Deg.C) 5/82
Process Parameter

Operating Temperature Range(Deg.C) 35

Maximum Flow rate (Nm3/hr) 1000(Hold)
Maximum allowable pressure drop (bar) 0.01(VTC)
Flash Point 0 C Gas
Molecular Weight of Gas 29
Viscosity (cp) 0.011
Density (kg/m3) 1.3
Dimensional Standard Manufacture Standard
DESIGN

Flame Arrestor Group IIA, Deflagration (VTC)

Installation Vertical , Inline type
End Connections Flanged,FF to ASME B16.5
Housing with Integral Flanges UNS C83600, UNS C95800
( Note-3)

Elements (Internals)-Note-5 UNS C83600, UNS C95800

TESTING & MATERIALS

Body Bolting As per Clause 6.3 of SD-NOC-PVV-155

Gasket VTA
Element Gasket VTA
Pressure/Pneumatic test std Manufacture Standard
INSPECTION

Hydro test pressure (Barg) 1.5 x Design Pressure

NDE 100 % RT & MPT/LPT
Inspection & testing As per Manufacture Std
Material test certificate EN 10204 type 3.1
OTHERS

External painting As per SD-NOC-COR-350

Marking MSS SP-25 with Tag No. / Part No.
1. All Material shall be comply with Piping material class SD-NOC-PV-112 .
2. VTA-Denotes Vendor to Advice and VTC-Denotes Vendor to Confirm.
3. Vendor to confirm Material suitability for the Fluid at design Temperature & Pressure and Environmental conditions.
4. A Stainless Steel TAG showing Flame arrester TAG No,Manufacturer’s name, Serial Number, Housing material, element material, arrestor category shall be permanently attached
to the Flame arrester body.
NOTES

5. Cellular with size lower than Maximum Experimental Safe Gap (MESG).
6. Vendor to advice about the maximum acceptable distance of areestor from source of ignition.
7.Applicable Specification is SD-NOC-SAF-011

02 29-Jul-19 Re-isssued for Approved for Design saravanan Murugesan D Baptiste Pierre

01 28-May-19 Approved for Design saravanan Murugesan D Baptiste Pierre

00 2-Apr-19 Issued For Review saravanan Krishnakumar Baptiste Pierre

Revision Date Revision History Issued by Reviewed by Approved

 439780739.xls

DATA SHEET No DTS-1"-16-100

PROJECT Block 5 - AL SHAHEEN FIELD Development

Data Sheet for Hose Connection

Description
TYPE Universal Twsit lock type connector with locking pin
DESIGN CODE ASME B31.3/Manufacture Std
SIZE 1"

END CONNECTION( Note-4) 1" Flange 150# RF on one End ( Pipe Side) and 1" Female Universal( Twist lock type) coupling,dust plug and chain.

ORIENTATION To be specified at Detailed Engineering

MATERIAL(Note-1) SS316L-Vendor to Confirm. Material shall be suitable for fluid service.
CONSTRUCTION Manufacturer standard
FUNCTION For connection on utility stations
DESIGN CONDITIONS 10.3 barg at 82°C
COATING/PAINTING As per SD-NOC-COR-350
INSULATION Not Applicable
PHASE Gas
MARKING MSS-SP-25 (Note 3)
CERTIFICATION As per EN 10204 3.1
INSPECTION AND TESTING As per Manufacturer quality plan
COLOUR CODING FOR IDENTIFICATION (Note 4)
FLUID Utility Air
PIPING CLASS AS1 - 150#
NACE MR 0175 YES
HYDROTEST 1.5 X Design Pressure
DIMENSIONS By Vendor
WEIGHT By Vendor
Notes: 1 - Manufacturer shall confirm the suitability of materials of construction for the services and line conditions.
2 - All Hose connections Material shall be comply with Piping material class SD-NOC-PVV-112.
3 - Marking shall be done on SS316 identification plate directly fixed on the hose connector (or engraved on the hose connector).
4 - To be confirmed during Detailed Engineering
5 - Dust Plug shall be chained to Hose Connector,MOC of chain shall be Min SS316.
6 - All Hose connectoe Assemblies shall be suitable for Marine Environment and shall be resistant to Aging Abrasion ,Sunlight and Dews.
7 - Flange shall be Integral Part of Hose Connector.
8.Flange surface finish shall be as per SD-NOC-PVV-145
Quick Connector Dust Plug

Process Design
Op.Conditions
Conditions
P&ID Reference Tag Line no P (barg) T(°C) P (barg) T(°C) Fluid
ASEHA-05-270010-0001 SPP-1"-16-100-AS1 ASEH-1 1/2"-AU-540007-AS1 5.5 TO 8.5 40 10.3 0/82 Utility Air

ASEHA-05-270010-0001 SPP-1"-16-101-AS1 ASEH-1 1/2"-AU-540008-AS1 5.5 TO 8.5 40 10.3 0/82 Utility Air

ASEHA-05-270010-0001 SPP-1"-16-102-AS1 ASEH-1 1/2"-AU-540010-AS1 5.5 TO 8.5 40 10.3 0/82 Utility Air

ASEHA-05-270010-0001 SPP-1"-16-103-AS1 ASEH-1 1/2"-AU-540011-AS1 5.5 TO 8.5 40 10.3 0/82 Utility Air

ASEHA-05-270010-0001 SPP-1"-16-104-AS1 ASEH-1 1/2"-AU-540012-AS1 5.5 TO 8.5 40 10.3 0/82 Utility Air

ASEHA-05-270010-0001 SPP-1"-16-105-AS1 ASEH-1 1/2"-AU-540013-AS1 5.5 TO 8.5 40 10.3 0/82 Utility Air

ASEHA-05-270010-0001 SPP-1"-16-106-AS1 ASEH-1 1/2"-AU-540014-AS1 5.5 TO 8.5 40 10.3 0/82 Utility Air

ASEHA-05-270010-0001 SPP-1"-16-107-AS1 ASEH-1 1/2"-AU-540015-AS1 5.5 TO 8.5 40 10.3 0/82 Utility Air

02 29-Jul-19 Re-Issued for Approved for Design saravanan Murugaesan D Baptiste Pierre
01 28-May-19 Approved for Design saravanan Murugaesan D Baptiste Pierre
00 2-Apr-19 Issued for Review saravanan Krishnakumar Baptiste Pierre
Revision Date Revision History Issued by Reviewed by Approved

10/21
 439780739.xls

DATA SHEET NO DTS-1"-16-110

PROJECT Block 5 - AL SHAHEEN FIELD Development

Data Sheet for Hose Connection

Description
TYPE Standard Female Adaptor type connector
DESIGN CODE ASME B31.3/Manufacture Std
SIZE 1"
END CONNECTION( Note-4) 1" Flange 150# RF on one End ( Pipe Side) and 3/4" Female Adaptor( Hose Side)
ORIENTATION To be specified at Detailed Engineering
MATERIAL(Note-1) SS316L-Vendor to Confirm. Material shall be suitable for fluid service.
CONSTRUCTION Manufacturer standard
FUNCTION For connection on utility stations
DESIGN CONDITIONS 10.3 barg at 82°C
COATING/PAINTING As per SD-NOC-COR-350
INSULATION Not Applicable
PHASE Gas
MARKING MSS-SP-25 (Note 3)
CERTIFICATION As per EN 10204 3.1
INSPECTION AND TESTING As per Manufacturer quality plan
COLOUR CODING FOR IDENTIFICATION (Note 4)
FLUID Inert Gas/Nitrogen
PIPING CLASS AS1 - 150#
NACE MR 0175 YES
HYDROTEST 1.5 X Design Pressure
DIMENSIONS By Vendor
WEIGHT By Vendor
Notes: 1 - Manufacturer shall confirm the suitability of materials of construction for the services and line conditions.
2 - All Hose connections Material shall be comply with Piping material class SD-NOC-PVV-112.
3 - Marking shall be done on SS316 identification plate directly fixed on the hose connector (or engraved on the hose connector).
4 - To be confirmed during Detailed Engineering
5 - Dust Plug shall be chained to Hose Connector,MOC of chain shall be min SS316.
6 - All Hose connectoe Assemblies shall be suitable for Marine Environment and shall be resistant to Aging Abrasion ,Sunlight and Dews.
7 - Flange shall be Integral Part of Hose Connector.
8.Flange surface finish shall be as per SD-NOC-PVV-145
Quick Connector Dust Plug

Process Design
Op.Conditions
Conditions
P&ID Reference Tag Line nb P (barg) T(°C) P (barg) T(°C) Fluid
ASEHA-05-270010-0001 SPP-1"-16-110-AS1 ASEH-1 1/2"-GI-080004-AS1 7 40 10.3 0/82 Inert Gas

ASEHA-05-270010-0001 SPP-1"-16-111-AS1 ASEH-1 1/2"-GI-080005-AS1 7 40 10.3 0/82 Inert Gas

ASEHA-05-270010-0001 SPP-1"-16-112-AS1 ASEH-1 1/2"-GI-080006-AS1 7 40 10.3 0/82 Inert Gas

ASEHA-05-270010-0001 SPP-1"-16-113-AS1 ASEH-1 1/2"-GI-080007-AS1 7 40 10.3 0/82 Inert Gas

ASEHA-05-270010-0001 SPP-1"-16-114-AS1 ASEH-1 1/2"-GI-080008-AS1 7 40 10.3 0/82 Inert Gas

ASEHA-05-270010-0001 SPP-1"-16-115-AS1 ASEH-1 1/2"-GI-080009-AS1 7 40 10.3 0/82 Inert Gas

ASEHA-05-270010-0001 SPP-1"-16-116-AS1 ASEH-1 1/2"-GI-080011-AS1 7 40 10.3 0/82 Inert Gas

ASEHA-05-270010-0001 SPP-1"-16-117-AS1 ASEH-1 1/2"-GI-080012-AS1 7 40 10.3 0/82 Inert Gas

02 29-Jul-19 Re-Issued for Approved for Design saravanan Murugaesan D Baptiste Pierre
01 28-May-19 Approved for Design saravanan Murugaesan D Baptiste Pierre
00 2-Apr-19 Issued for Review saravanan Krishnakumar Baptiste Pierre

Revision Date Revision History Issued by Reviewed by Approved

11/21
 439780739.xls

DATA SHEET NO DTS-1"-16-120

PROJECT Block 5 - AL SHAHEEN FIELD Development

Data Sheet for Hose Connection

Description
TYPE Universal Twsit lock type connector with locking pin
DESIGN CODE ASME B31.3/Manufacture Std
SIZE 1"

END CONNECTION( Note-4) 1" Flange 150# FF on one End ( Pipe Side) and 1" Female Universal( Twist lock type) coupling,dust plug and chain.

ORIENTATION To be specified at Detailed Engineering

MATERIAL(Note-1) UNS C83600/ UNS C95800-Vendor to Confirm. Material shall be suitable for fluid service.
CONSTRUCTION Manufacturer standard
FUNCTION For connection on utility stations
DESIGN CONDITIONS 14.9barg at 82°C
COATING/PAINTING As per SD-NOC-COR-350
INSULATION Not Applicable
PHASE Liquid
MARKING MSS-SP-25 (Note 3)
CERTIFICATION As per EN 10204 3.1
INSPECTION AND TESTING As per Manufacturer quality plan
COLOUR CODING FOR IDENTIFICATION (Note 4)
FLUID Potable Water
PIPING CLASS AR1- 150#
NACE MR 0175 No
HYDROTEST 1.5 X Design Pressure
DIMENSIONS By Vendor
WEIGHT By Vendor

Notes: 1 - Manufacturer shall confirm the suitability of materials of construction for the services and line conditions.
2 - All Hose connections Material shall be comply with Piping material class SD-NOC-PVV-112 .
3 - Marking shall be done on SS316 identification plate directly fixed on the hose connector (or engraved on the hose connector).
4 - To be confirmed during Detailed Engineering
5 - Dust Plug shall be chained to Hose Connector,MOC of chain shall be min SS316.
6 - All Hose connectoe Assemblies shall be suitable for Marine Environment and shall be resistant to Aging Abrasion ,Sunlight and Dews.
7 .Flange shall be Integral Part of Hose Connector.
8.Flange surface finish shall be as per SD-NOC-PVV-145
Quick Connector Dust Plug

Process Design
Op.Conditions
Conditions
P&ID Reference Tag Line nb P (barg) T(°C) P (barg) T(°C) Fluid
ASEHA-05-270010-0001 SPP-1"-16-120-AR1 ASEH-1 1/2"-WP-100004-AR1 3.5-3.8 35 14.9 0/82 Potable Water

ASEHA-05-270010-0001 SPP-1"-16-121-AR1 ASEH-1 1/2"-WP-100005-AR1 3.5-3.8 35 14.9 0/82 Potable Water

ASEHA-05-270010-0001 SPP-1"-16-122-AR1 ASEH-1 1/2"-WP-100006-AR1 3.5-3.8 35 14.9 0/82 Potable Water

ASEHA-05-270010-0001 SPP-1"-16-123-AR1 ASEH-1 1/2"-WP-100007-AR1 3.5-3.8 35 14.9 0/82 Potable Water

ASEHA-05-270010-0001 SPP-1"-16-124-AR1 ASEH-1 1/2"-WP-100012-AR1 3.5-3.8 35 14.9 0/82 Potable Water

ASEHA-05-270010-0001 SPP-1"-16-125-AR1 ASEH-1 1/2"-WP-100013-AR1 3.5-3.8 35 14.9 0/82 Potable Water

ASEHA-05-270010-0001 SPP-1"-16-126-AR1 ASEH-1 1/2"-WP-100014-AR1 3.5-3.8 35 14.9 0/82 Potable Water

ASEHA-05-270010-0001 SPP-1"-16-127-AR1 ASEH-1 1/2"-WP-100015-AR1 3.5-3.8 35 14.9 0/82 Potable Water

02 29-Jul-19 Re-Issued for Approved for Design saravanan Murugaesan D Baptiste Pierre
01 28-May-19 Approved for Design saravanan Murugaesan D Baptiste Pierre
00 2-Apr-19 Issued for Review saravanan Krishnakumar Baptiste Pierre

Revision Date Revision History Issued by Reviewed by Approved

12/21
 439780739.xls

DATA SHEET NO DTS-1"-16-130

PROJECT Block 5 - AL SHAHEEN FIELD Development

Data Sheet for Hose Connection

Description
TYPE Universal Twsit lock type connector with locking pin
DESIGN CODE ASME B31.3/Manufacture Std
SIZE 1"

END CONNECTION( Note-4) 1" Flange 150# FF on one End ( Pipe Side) and 1" Female Universal( Twist lock type) coupling,dust plug and chain.

ORIENTATION To be specified at Detailed Engineering

MATERIAL(Note-1) UNS C83600/ UNS C95800-Vendor to Confirm. Material shall be suitable for fluid service.
CONSTRUCTION Manufacturer standard
FUNCTION For connection on utility stations
DESIGN CONDITIONS 14.9 barg at 60°C
COATING/PAINTING As per SD-NOC-COR-350
INSULATION Not Applicable
PHASE Liquid
MARKING MSS-SP-25 (Note 3)
CERTIFICATION As per EN 10204 3.1
INSPECTION AND TESTING As per Manufacturer quality plan
COLOUR CODING FOR IDENTIFICATION (Note 4)
FLUID Service Water
PIPING CLASS AR1- 150#
NACE MR 0175 No
HYDROTEST 1.5 X Design Pressure
DIMENSIONS By Vendor
WEIGHT By Vendor
Notes: 1 - Manufacturer shall confirm the suitability of materials of construction for the services and line conditions.
2 - All Hose connections Material shall be comply with Piping material class SD-NOC-PVV-112 .
3 - Marking shall be done on SS316 identification plate directly fixed on the hose connector (or engraved on the hose connector).
4 - To be confirmed during Detailed Engineering
5 - Dust Plug shall be chained to Hose Connector,MOC of chain shall be min SS316.
6 - All Hose connectoe Assemblies shall be suitable for Marine Environment and shall be resistant to Aging Abrasion ,Sunlight and Dews.
7 .Flange shall be Integral Part of Hose Connector.
8.Flange surface finish shall be as per SD-NOC-PVV-145
Quick Connector Dust Plug

Process Design
Op.Conditions
Conditions
P&ID Reference Tag Line no P (barg) T(°C) P (barg) T(°C) Fluid
ASEHA-05-270010-0001 SPP-1"-16-130-AR1 ASEH-1 1/2"-WS-520004-AR1 7 to 8 23 14.9 0/60 Sea Water Service

ASEHA-05-270010-0001 SPP-1"-16-131-AR1 ASEH-1 1/2"-WS-520005-AR1 7 to 8 23 14.9 0/60 Sea Water Service

ASEHA-05-270010-0001 SPP-1"-16-132-AR1 ASEH-1 1/2"-WS-520006-AR1 7 to 8 23 14.9 0/60 Sea Water Service

ASEHA-05-270010-0001 SPP-1"-16-133-AR1 ASEH-1 1/2"-WS-520007-AR1 7 to 8 23 14.9 0/60 Sea Water Service

ASEHA-05-270010-0001 SPP-1"-16-134-AR1 ASEH-1 1/2"-WS-520008-AR1 7 to 8 23 14.9 0/60 Sea Water Service

ASEHA-05-270010-0001 SPP-1"-16-135-AR1 ASEH-1 1/2"-WS-520009-AR1 7 to 8 23 14.9 0/60 Sea Water Service

ASEHA-05-270010-0001 SPP-1"-16-136-AR1 ASEH-1 1/2"-WS-520010-AR1 7 to 8 23 14.9 0/60 Sea Water Service

ASEHA-05-270010-0001 SPP-1"-16-137-AR1 ASEH-1 1/2"-WS-520011-AR1 7 to 8 23 14.9 0/60 Sea Water Service

02 29-Jul-19 Reissued for Approved for Design saravanan Murugaesan D Baptiste Pierre
01 28-May-19 Approved for Design saravanan Murugaesan D Baptiste Pierre

00 2-Apr-19 Issued for Review saravanan Krishnakumar Baptiste Pierre

Revision Date Revision History Issued by Reviewed by Approved

13/21
 439780739.xls

DATA SHEET No DTS-2"-16-140

PROJECT Block 5 - AL SHAHEEN FIELD Development

Data Sheet for Hose Connection

Description
TYPE Standard Female camlock connector with locking pin
DESIGN CODE ASME B31.3/Manufacture Std
SIZE 2"

END CONNECTION( Note-4) 2" Flange 150# RF on one End ( Pipe Side) and 2" Female camlock Coupling with Dust cap on other end( Hose side).

ORIENTATION To be specified at Detailed Engineering

MATERIAL(Note-1) SS316L-Vendor to Confirm. Material shall be suitable for fluid service.
CONSTRUCTION Manufacturer standard
FUNCTION For connection on utility stations
DESIGN CONDITIONS 10 barg at 82°C
COATING/PAINTING As per SD-NOC-COR-350
INSULATION Not Applicable
PHASE Liquid
MARKING MSS-SP-25 (Note 3)
CERTIFICATION As per EN 10204 3.1
INSPECTION AND TESTING As per Manufacturer quality plan
COLOUR CODING FOR IDENTIFICATION (Note 4)
FLUID Diesel
PIPING CLASS AD1 - 150#
NACE MR 0175 YES
HYDROTEST 1.5 X Design Pressure
DIMENSIONS By Vendor
WEIGHT By Vendor
Notes: 1 - Manufacturer shall confirm the suitability of materials of construction for the services and line conditions.
2 - All Hose connections Material shall be comply with Piping material class SD-NOC-PVV-112.
3 - Marking shall be done on SS316 identification plate directly fixed on the hose connector (or engraved on the hose connector).
4 - To be confirmed during Detailed Engineering
5 - Dust Plug shall be chained to Hose Connector,MOC of chain shall be Min SS316.
6 - All Hose connectoe Assemblies shall be suitable for Marine Environment and shall be resistant to Aging Abrasion ,Sunlight and Dews.
7 - Flange shall be Integral Part of Hose Connector.
Quick Connector Dust Plug

Process Design
Op.Conditions
Conditions
P&ID Reference Tag Line no P (barg) T(°C) P (barg) T(°C) Fluid
ASEGZ-05-270012-0001 SPP-2"-16-140-AD1 ASEH-2"-OD-570036-AD1 5 35 10 0/82 Diesel

ASEGZ-05-270012-0001 SPP-2"-16-140-AD1 ASEH-2"-OD-570037-AD1 5 35 10 0/82 Diesel

01 29-Jul-19 Re-issued Approved for Design saravanan Murugaesan D Baptiste Pierre

00 28-May-19 Approved for Design saravanan Murugaesan D Baptiste Pierre
Revision Date Revision History Issued by Reviewed by Approved

14/21
 439780739.xls

DATA SHEET N° DTS-2"-32-100

PROJECT Block 5 - AL SHAHEEN FIELD Development

Data Sheet for Special Flange

(1) ASME B16.5, 2" Welding Neck Flange, 900Lbs,

ASTM A350 LF2 CL1, RJ, Sch 160 Bore as per
SD-NOC-PVV-112.
(2) Special Item Number shall be marked
on flange permanently
(3) Flange shall be designed as per SD-NOC-PVV-145,
and ASME B16.5
(4) Flange surface finish shall be as per SD-NOC-PVV-145
section 8.1
(5) 3mm Inconel-625 weld overlay on the gasket contact face,
the minimum BRINELL hardness flange shall be 180.
(6) Material shall comply with NACE MR0175/ISO 15156 PART 2

(7) Final Dimensions after Overlay Shall be as per ASME B16.5

(8) Weight: 11,5 kg

Description
P&ID Reference Tag no Line No Design Limits Spec Overlay MOC Fluid
ASEHA-04-270006-0001 SPP-2"-32-100-ED1 ASEH-8"-PHS-300102-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270011-0001 SPP-2"-32-101-ED1 ASEH-8"-PHS-30XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270011-0001 SPP-2"-32-102-ED1 ASEH-8"-PHS-30XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270011-0001 SPP-2"-32-103-ED1 ASEH-8"-PHS-30XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270011-0001 SPP-2"-32-104-ED1 ASEH-8"-PHS-30XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270011-0001 SPP-2"-32-105-ED1 ASEH-8"-PHS-30XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270011-0001 SPP-2"-32-106-ED1 ASEH-8"-PHS-30XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270011-0001 SPP-2"-32-107-ED1 ASEH-8"-PHS-30XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270011-0001 SPP-2"-32-108-ED1 ASEH-8"-PHS-30XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270012-0001 SPP-2"-32-120-ED1 ASEH-18"-PHS-330014-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270012-0001 SPP-2"-32-121-ED1 ASEH-10"-PTS-330015-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270012-0001 SPP-2"-32-122-ED1 ASEH-18"-PHS-330014-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270012-0001 SPP-2"-32-123-ED1 ASEH-10"-PTS-330015-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270013-0001 SPP-2"-32-124-ED1 ASEH-18"-PHS-330001-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270013-0001 SPP-2"-32-125-ED1 ASEH-10"-PTS-330002-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270013-0001 SPP-2"-32-126-ED1 ASEH-18"-PHS-330001-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270013-0001 SPP-2"-32-127-ED1 ASEH-10"-PTS-330002-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270020-0001 SPP-2"-32-175-ED1 ASEH-6"-PHS-30XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270020-0001 SPP-2"-32-176-ED1 ASEH-6"-PHS-30XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270020-0001 SPP-2"-32-177-ED1 ASEH-6"-PHS-30XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270020-0001 SPP-2"-32-178-ED1 ASEH-6"-PHS-30XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270020-0001 SPP-2"-32-179-ED1 ASEH-6"-PHS-30XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270020-0001 SPP-2"-32-180-ED1 ASEH-6"-PHS-30XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270020-0001 SPP-2"-32-181-ED1 ASEH-6"-PHS-30XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270024-0001 SPP-2"-32-142-ED1 ASEH-18"-PHS-330003-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270024-0001 SPP-2"-32-143-ED1 ASEH-18"-PHS-330003-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270024-0001 SPP-2"-32-144-ED1 ASEH-10"-PTS-340006-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270024-0001 SPP-2"-32-145-ED1 ASEH-10"-PTS-340006-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270024-0001 SPP-2"-32-146-ED1 ASEH-18"-PHS-330016-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-04-270024-0001 SPP-2"-32-147-ED1 ASEH-18"-PHS-330016-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEGZ-05-270011-0001 SPP-2"-32-200-ED1 ASEH-18"-PHS-330004-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEGZ-05-270011-0001 SPP-2"-32-201-ED1 ASEH-18"-PHS-330008-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid

ASEGZ-05-270011-0001 SPP-2"-32-202-ED1 ASEH-10"-PTS-340017-ED1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid

01 28-May-19 Approved for Design saravanan Murugaesan D Baptiste Pierre

00 2-Apr-19 Issued for Review saravanan Krishnakumar Baptiste Pierre

Revision Date Revision History Issued by Reviewed by Approved

15/21
 439780739.xls

DATA SHEET NO DTS-2"-32-101

PROJECT Block 5 - AL SHAHEEN FIELD Development

Data Sheet for Special Flange

(1) ASME B16.5, 2" Welding Neck Flange, 1500Lbs,

ASTM A350 LF2 CL1, RJ, Sch 160 Bore as per
SD-NOC-PVV-112.
(2) Special Item Number shall be marked
on flange permanently
(3) Flange shall be designed as per SD-NOC-PVV-145,
and ASME B16.5
(4) Flange surface finish shall be as per SD-NOC-PVV-145
section 8.1
(5) 3mm (SS309L+SS316L)weld overlay on the gasket contact face,
the minimum BRINELL hardness flange shall be 180.
(6) Material shall comply with NACE MR0175/ISO 15156 PART 2

(7) Final Dimensions after Overlay Shall be as per ASME B16.5

(8) Weight: 11,5 kg

Description
P&ID Reference Tag no Line No Design Limits Spec Overlay MOC Fluid
ASEHA-04-270006-0001 SPP-2"-32-110-ED1 ASEH-2"-GPS-290102-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-111-ED1 ASEH-2"-GPS-290202-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-112-ED1 ASEH-2"-GPS-290302-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-113-ED1 ASEH-2"-GPS-290402-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-114-ED1 ASEH-2"-GPS-290502-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-115-ED1 ASEH-2"-GPS-290602-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-116-ED1 ASEH-2"-GPS-290702-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-117-ED1 ASEH-2"-GPS-290802-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270014-0001 SPP-2"-32-160-ED1 ASEH-3"-PTS-330025-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270014-0001 SPP-2"-32-161-ED1 ASEH-2"-FYS-400003-FS1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270014-0001 SPP-2"-32-162-ED1 ASEH-2"-FYS-400016-FS1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-170-ED1 ASEH-3"-GPS-290027-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-171-ED1 ASEH-4"-GPS-290011-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-172-ED1 ASEH-4"-GPS-290012-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-174-ED1 ASEH-2"-GPS-29XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-182-ED1 ASEH-2"-GPS-29XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-183-ED1 ASEH-2"-GPS-29XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-184-ED1 ASEH-2"-GPS-29XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-185-ED1 ASEH-2"-GPS-29XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-186-ED1 ASEH-2"-GPS-29XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-2"-32-187-ED1 ASEH-2"-GPS-29XX02-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270024-0001 SPP-2"-32-140-ED1 ASEH-3"-PHS-330023-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270024-0001 SPP-2"-32-141-ED1 ASEH-3"-PHS-330020-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEGZ-05-270011-0001 SPP-2"-32-203-ED1 ASEH-3"-PHS-330011-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEGZ-05-270011-0001 SPP-2"-32-204-ED1 ASEH-3"-PHS-330012-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEGZ-05-270011-0001 SPP-2"-32-205-ED1 ASEH-3"-PHS-341002-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEGZ-05-270011-0002 SPP-2"-32-240-ED1 ASEH-3"-GPS-290005-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid

01 28-May-19 Approved for Design saravanan Murugaesan D Baptiste Pierre

00 2-Apr-19 Issued for Review saravanan Krishnakumar Baptiste Pierre

Revision Date Revision History Issued by Reviewed by Approved

16/21
 439780739.xls

DATA SHEET NO DTS-2"-32-102

PROJECT Block 5 - AL SHAHEEN FIELD Development

Data Sheet for Special Flange

(1) ASME B16.5, 2" Welding Neck Flange, 900Lbs,

ASTM A350 LF2 CL1, RJ, Sch 80 Bore as per
SD-NOC-PVV-112.
(2) Special Item Number shall be marked
on flange permanently
(3) Flange shall be designed as per SD-NOC-PVV-145,
and ASME B16.5
(4) Flange surface finish shall be as per SD-NOC-PVV-145
section 8.1
(5) 3mm Inconel-625 weld overlay on the gasket contact face,
the minimum BRINELL hardness flange shall be 180.
(6) Material shall comply with NACE MR0175/ISO 15156 PART 2

(7) Final Dimensions after Overlay Shall be as per ASME B16.5

(8) Weight: 11,5 kg

Description
P&ID Reference Tag no Line No Design Limits Spec Overlay MOC Fluid
ASEHA-05-270004-0001 SPP-2"-32-190-AD1 ASEH-4"-DPS-500069-AD1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-05-270004-0001 SPP-2"-32-191-AD1 ASEH-4"-DPS-500070-AD1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEHA-05-270004-0001 SPP-2"-32-192-AD1 ASEH-4"-DPS-500010-AD1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEGZ-05-270011-0001 SPP-2"-32-230-AD1 ASEH-2"-DPS-500071-AD1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEGZ-05-270011-0001 SPP-2"-32-231-AD1 ASEG-2"-DPS-500034-AD1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEGZ-05-270011-0001 SPP-2"-32-232-AD1 ASEH-2"-DPS-500072-AD1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEGZ-05-270011-0001 SPP-2"-32-233-AD1 ASEG-2"-DPS-500038-AD1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEGZ-05-270011-0001 SPP-2"-32-234-AD1 ASEH-2"-DPS-500073-AD1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid
ASEGZ-05-270011-0001 SPP-2"-32-235-AD1 ASEG-2"-DPS-500000-AD1 As per ASME B16.5 Material group 1.1 limit ED1 Inoconel-625 Process Fluid

01 28-May-19 Approved for Design saravanan Murugaesan D Baptiste Pierre

00 2-Apr-19 Issued for Review saravanan Krishnakumar Baptiste Pierre
Revision Date Revision History Issued by Reviewed by Approved

17/21
 439780739.xls

DATA SHEET NO DTS-2"-32-110

PROJECT Block 5 - AL SHAHEEN FIELD Development

Data Sheet for Special Flange

(1) ASME B16.5, 2" Welding Neck Flange, 150Lbs,

ASTM A350 LF2 CL1, RF, Sch 80 Bore as per

SD-NOC-PVV-112 .
(2) Special Item Number shall be marked
on flange permanently
(3) Flange shall be designed as per SD-NOC-PVV-145,
and ASME B16.5
(4) Flange surface finish shall be as per SD-NOC-PVV-145

section 8.1
(5) 3mm Inconel-625 weld overlay on the gasket contact face,

(6) Material shall comply with NACE MR0175/ISO 15156 PART 2

(7) Final Dimensions after Overlay Shall be as per ASME B16.5

(8) Weight: 2.7 kg

Description
P&ID Reference Tag no Line No Design Limits Spec Overlay MOC Fluid
ASEHA-05-270007-0001 SPP-2"-32-221-AD1 ASEH-4"-DPS-500010-AD1 As per ASME B16.5 Material group 1.1 l AD1 Inoconel-625 Process Fluid

01 28-May-19 Approved for Design saravanan Murugaesan D Baptiste Pierre

00 2-Apr-19 Issued for Review saravanan Krishnakumar Baptiste Pierre
Revision Date Revision History Issued by Reviewed by Approved

18/21
 439780739.xls

DATA SHEET NO DTS-3"-32-100

PROJECT Block 5 - AL SHAHEEN FIELD Development

Data Sheet for Special Flange

(1) ASME B16.5, 3" Welding Neck Flange, 1500Lbs,

ASTM A350 LF2 CL1, RJ, Sch 160 Bore as per
SD-NOC-PVV-112 & WHP02-RCE2-ASCYY-06-390001-0001.
(2) Special Item Number shall be marked
on flange permanently
(3) Flange shall be designed as per SD-NOC-PVV-145,
and ASME B16.5
(4) Flange surface finish shall be as per SD-NOC-PVV-145
section 8.1
(5) 3mm (SS309L+SS316L )weld overlay on the gasket contact face,
the minimum BRINELL hardness flange shall be 180.
(6) Material shall comply with NACE MR0175/ISO 15156 PART 2

(7) Final Dimensions after Overlay Shall be as per ASME B16.5

(8) Weight: 20.5 kg

Description
P&ID Reference Tag no Line No Design Limits Spec Overlay MOC Fluid
ASEHA-04-270014-0001 SPP-3"-32-150-ED1 ASEH-3"-PTS-330025-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270015-0001 SPP-3"-32-151-ED1 ASEH-3"-GPS-290027-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270024-0001 SPP-3"-32-130-ED1 ASEH-3"-PHS-330023-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEHA-04-270024-0001 SPP-3"-32-131-ED1 ASEH-3"-PHS-330020-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEGZ-05-270011-0001 SPP-3"-32-210-ED1 ASEH-3"-PHS-330011-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEGZ-05-270011-0001 SPP-3"-32-211-ED1 ASEH-3"-PHS-330012-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEGZ-05-270011-0001 SPP-3"-32-212-ED1 ASEH-3"-PHS-341002-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid
ASEGZ-05-270011-0002 SPP-3"-32-213-ED1 ASEH-3"-GPS-290005-ED1 As per ASME B16.5 Material group 1.1 limit ED1 SS309L+SS316L Process Fluid

01 28-May-19 Approved for Design saravanan Murugaesan D Baptiste Pierre

00 2-Apr-19 Issued for Review saravanan Krishnakumar Baptiste Pierre
Revision Date Revision History Issued by Reviewed by Approved

19/21
 DATA SHEET NO DTS-6"-37-100

PROJECT Block 5 - AL SHAHEEN FIELD Development

Data Sheet for Hub Connector

SPP-6"-37-100-FD1,SPP-6"-37-101-FD1,SPP-6"-37-102-FD1,SPP-6"-37-103-FD1,SPP-6"-
Tag No
37-104-FD1,SPP-6"-37-105-FD1,SPP-6"-37-106-FD1,SPP-6"-37-107-FD1
GENERAL REQUIREMENTS

Size 6"
Reference P&IDs ASEHA-04-270020-0001 & ASEHA-04-270021-0001
Line No 6"-WI-35XX02-FD1
Service Water Injection
NACE MR 0175 yes
Manufacturer & Model no. By vendor
Pipe Class FD1
Class Rating CL 1500
PARAMETER

Design pressure (Barg) 228

PROCESS

Operating pressure (Barg) 120

Design temp. Min / Max (Deg.C) 0/82
Operating Temperature Range Min / Max (Deg.C) 20-35
Design Code ASME BPVC Section VIII Div 1 ,2 and ASME B31.3
DESIGN

Dimensional Standard Manufacture Standard

Type Hub Connector with Clamps ,Seal Ring and bolting
End Connections Sch -XXS,Butt Weld as per ASME B 16.25
Hub (Note-5) ASTM A350 LF2 CL1 - Seating & Sealing area overlay with inconel 625
MATERIALS

Clamp ASTM 320 GR L7 ,TSA CTD

Seal Ring ALLOY 625

Bolts ASTM 320 GR L7 & ASTM A194 GR 7L S3,Hot Dip Galvanized as per ASTM A153

Pressure/Pneumatic test std ASME B31.3\Manufacture Standard

INSPECTION
TESTING &

Hydro test pressure (Barg) 1.5 x Design Pressure

NDE 100 % DPI +100% UT on Weld overlay surface
Inspection & testing As per Manufacture Std
Material test certificate EN 10204 type 3.2
OTHERS

External painting As per SD-NOC-COR-350

Marking MSS SP-25 with Tag No. / Part No.
Weight and Torque VTA

1.Design and material of the hub connector shall comply to the requirements provided in SD NOC PVV 112 and piping design basis (Document No-WHP02-RCE2-ASSYY-06-
262003-0001)

2. VTA-Denotes Vendor to Advice and VTC-Denotes Vendor to Confirm.

3.Vendor to confirm Material suitability for the Fluid at design Temperature & Pressure and Environmental conditions.
4. Hub Connector shall be comply with Clause 6.9 of Piping material class SD-NOC-PVV-112

5. Overlay in the seal ring Pocket shall extend till the contact surface of the seal ring on hub face.The overlay shall also extend 10 mm into bore.

6. A Stainless Steel(316) TAG showing Hub Connector TAG No. shall be permanently attached to the Hub Connector body.

7. Hub Connector shall be comply with Clause 6.1.4 of CE,EH Green Field Piping Design Basis(WHP02-RCE2-ASYYY-06-262003-0001).
NOTES

01 29-Jul-19 Re-Issued for Approved for Design saravanan Murugesan D Baptiste Pierre

00 28-May-19 Approved for Design saravanan Murugesan D Baptiste Pierre

Revision Date Revision History Issued by Reviewed by Approved