Scribd
Upload
120 views

Perform-3D Install Instructions PDF

This document provides instructions for installing PERFORM 3D software either as a standalone installation on a single computer or as part of a network installation to be shared over a network. For both installation types, a license file is required and can be obtained by running the Echoid.exe file located in the installed program folder and filling out a license request form with the provided locking code. The license file will then be emailed from CSI. For network installations, the Sentinel RMS License Manager must also be installed.

Uploaded by

Viteri Zavaleta Elizabeth
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
120 views

Perform-3D Install Instructions PDF

This document provides instructions for installing PERFORM 3D software either as a standalone installation on a single computer or as part of a network installation to be shared over a network. For both installation types, a license file is required and can be obtained by running the Echoid.exe file located in the installed program folder and filling out a license request form with the provided locking code. The license file will then be emailed from CSI. For network installations, the Sentinel RMS License Manager must also be installed.

Uploaded by

Viteri Zavaleta Elizabeth
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

IMPORTANT: READ BEFORE INSTALLATION

TO ENSURE PROPER INSTALLATION, FOLLOW STEPS CLOSELY


This software is protected by a licensing system. To use this software, a license file must be present.
The license file is locked to a specific computer or to a computer ID key (hardware device or dongle).
The software can be installed on a single computer or on a network server. You have the choice of
requesting a license for a single user (standalone license) or a license shared over a network (network
license), available to many users.
(For NETWORK INSTALLATION, see reverse)

version 5

Standalone Installation Instructions

 Install the PERFORM 3D Program

1. Start the PERFORM 3D browser and go to the installation page. Click the standalone button
and follow the instructions. A 30-day temporary license file will be installed with the program.

 To Obtain a Standalone License File

Locked to a Computer
Go to the installed program folder and run Echoid.exe. Copy Locking Code 1 to the Computer
Disk ID Locking Code 1 field on the License Request Form.

Locked to a Computer ID Key:


Attach the Computer ID Key to your computer. Go to the installed program folder and run
Echoid.exe. Copy the Locking Code 2 to the Computer ID Key Locking Code 2 field on the
License Request Form.

Email the completed License Request Form to CSI. A license file will be emailed to you.

Copy that license file into the installed program folder.

Computers & Structures, Inc.


1995 University Avenue, Berkeley, CA suite 540
tel: 510/649-2200 fax: 510/649-2299 email: [email protected] web: www.csiberkeley.com
IMPORTANT: READ BEFORE INSTALLATION

TO ENSURE PROPER INSTALLATION, FOLLOW STEPS CLOSELY


This software is protected by a licensing system. To use this software, a license file must be present.
The license file is locked to a specific computer or to a computer ID key (hardware device or dongle).
The software can be installed on a single computer or on a network server. You have the choice of
requesting a license for a single user (standalone license) or a license shared over a network (network
license), available to many users.
(For STANDALONE INSTALLATION, see reverse)

version 5

Network Installation Instructions

 A. Install the PERFORM-3D Program  C. To Obtain a Network License File



1. Start the Perform 3D browser and go to the installation page. 1. You will need the files “Echoid.exe” and “Echoid.dat” on the
Click on the Standalone installations page. Click on the Standalone computer running the License Manager software. These files are
button and follow the instructions. installed with the software.

 B. Install the License Manager Software Locked to a Computer


Go to the installed program folder and run Echoid.exe. Copy
1. The communications protocol is TCP/IP. Locking Code 1 to the Computer Disk ID Locking Code 1 field on
the License Request Form.
2. The browser contains Sentinel RMS License Manager version
8.4.1. This must be installed in order to recognize a network Locked to a Computer ID Key:
license. If you are currently running an earlier version of Attach the Computer ID Key to your computer. Go to the installed
SentinelLM, it should be uninstalled prior to installing this version. program folder and run Echoid.exe. Copy the Locking Code 2 to
Note that all commuter licenses should be checked in before the Computer ID Key Locking Code 2 field on the License
uninstalling the old version. Request Form.

Click on the License Manager button and follow the instructions. Email the completed License Request Form to CSI. A license
(Note that you can install this software on any Windows computer on file and instructions will be emailed to you.
your network; it does not have to be installed on a server.)

3. A 30-day temporary license for one network user is installed with  D. To Obtain a Network License File
the software. To register the temporary license, double click
“IsLicense.bat” located in the PERFORM 3D License Manager” 1. You will need the files “Echoid.exe” and “Echoid.dat” on the
folder which was installed in Step A. computer running the License Manager software. These files are
installed with the software.
4. For more detailed information about the Sentinel RMS License
Manager or the License Manager Administration Program “WlmAd- Locked to a Computer
min,” see the Systems Administrator’s Help which can be accessed Run Echoid.exe on the computer running the License Manager
from Start > All Programs > Computers and Structures> PERFORM program. Copy Locking Code 1 to the Computer Disk ID Locking
3D> License Manager. It will be available after Step A above. Code 1 field on the License Request Form.

Locked to a Computer ID Key:


Attach the Computer ID Key to your computer. Run Echoid.exe on
the computer running the License Manager program. Copy the
Locking Code 2 to the Computer ID Key Locking Code 2 field on
the License Request Form.

Email the completed License Request Form to CSI. A license


file and instructions will be emailed to you.

You might also like