Scribd
Upload
63 views

8051 Microcontroller

The document provides an overview of the Intel 8051 microcontroller, one of the most popular general purpose microcontrollers. It describes the 8051's features such as 4KB of program memory, 128 bytes of data memory, timers, ports, and typical applications. It also provides details on the 8051's architecture, program and data memory, oscillator circuits, and special function and general purpose registers.

Uploaded by

VIVEK CHAUDHARY
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
63 views

8051 Microcontroller

The document provides an overview of the Intel 8051 microcontroller, one of the most popular general purpose microcontrollers. It describes the 8051's features such as 4KB of program memory, 128 bytes of data memory, timers, ports, and typical applications. It also provides details on the 8051's architecture, program and data memory, oscillator circuits, and special function and general purpose registers.

Uploaded by

VIVEK CHAUDHARY
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 20

Wikibooks

Embedded
Systems/8051
Microcontroller
< Embedded Systems

The Intel 8051 microcontroller is one of


the most popular general purpose
microcontrollers in use today. The success
of the Intel 8051 spawned a number of
clones, which are collectively referred to
as the MCS-51 family of microcontrollers,
which includes chips from vendors such
as Atmel, Philips, Infineon, Analog Devices
and Texas Instruments.

About 8051
The Intel 8051 is an 8-bit microcontroller
which means that most available
operations are limited to 8 bits. There are
3 basic "sizes" of the 8051: Short,
Standard, and Extended. The Short and
Standard chips are often available in DIP
(dual in-line package) form, but the
Extended 8051 models often have a
different form factor, and are not "drop-in
compatible". All these things are called
8051 because they can all be programmed
using 8051 assembly language, and they
all share certain features (although the
different models all have their own special
features).

Some of the features that have made the


8051 popular are:

4 KB on chip program memory.


128 bytes on chip data memory(RAM)
32 bytes devoted to register banks
16 bytes of bit-addressable memory
80 bytes of general-purpose
memory
4 reg banks.
128 user defined software flags.
8-bit data bus
16-bit address bus
16 bit timers (usually 2, but may have
more, or less).
3 internal and 2 external interrupts.
Bit as well as byte addressable RAM
area of 16 bytes.
Four 8-bit ports, (short models have two
8-bit ports).
16-bit program counter and data pointer.
1 Microsecond instruction cycle with
12 MHz Crystal.

Variants of the 8051 may also have a


number of special, model-specific
features, such as UART, ADC, Op_Amps,
etc., making it an even more powerful
microcontroller.

Typical applications
8051 chips are used in a wide variety of
control systems, telecom applications,
robotics as well as in the automotive
industry. By some estimations, 8051
family chips make up over 50% of the
embedded chip market.
Pin diagram of the 8051 DIP

Basic Pins
PIN 9: PIN 9 is the reset pin which is used
to reset the microcontroller’s internal
registers and ports upon starting up. (Pin
should be held high for 2 machine cycles.)

PINS 18 & 19: The 8051 has a built-in


oscillator amplifier hence we need to only
connect a crystal at these pins to provide
clock pulses to the circuit.

PIN 40 and 20: Pins 40 and 20 are VCC


and ground respectively. The 8051 chip
needs +5V 500mA to function properly,
although there are lower powered versions
like the Atmel 2051 which is a scaled
down version of the 8051 which runs on
+3V.

PINS 29, 30 & 31: As described in the


features of the 8051, this chip contains a
built-in flash memory. In order to program
this we need to supply a voltage of +12V
at pin 31. If external memory is connected
then PIN 31, also called EA/VPP, should be
connected to ground to indicate the
presence of external memory. PIN 30 is
called ALE (address latch enable), which is
used when multiple memory chips are
connected to the controller and only one of
them needs to be selected.We will deal
with this in depth in the later chapters. PIN
29 is called PSEN. This is "program store
enable". In order to use the external
memory it is required to provide the low
voltage (0) on both PSEN and EA pins.

Pin 29: If we use an external ROM then it


should have a logic 0 which indicates
Micro controller to read data from
memory.

Pin 30: This Pin is used for ALE that is


Address Latch Enable. If we use multiple
memory chips then this pin is used to
distinguish between them.It is activated
periodically with a constant rate of 1/6th
of oscillator frequency. This Pin also gives
program pulse input during programming
of EPROM.

Pin 31: If we have to use multiple


memories then by applying logic 1 to this
pin instructs Micro controller to read data
from both memories first internal and
afterwards external.

Ports
There are 4 8-bit ports: P0, P1, P2 and P3.

PORT P1 (Pins 1 to 8): The port P1 is a


general purpose input/output port which
can be used for a variety of interfacing
tasks. The other ports P0, P2 and P3 have
dual roles or additional functions
associated with them based upon the
context of their usage.The port 1 output
buffers can sink/source four TTL inputs.
When 1s are written to portn1 pins are
pulled high by the internal pull-ups and can
be used as inputs.

PORT P3 (Pins 10 to 17): PORT P3 acts as


a normal IO port, but Port P3 has
additional functions such as, serial
transmit and receive pins, 2 external
interrupt pins, 2 external counter inputs,
read and write pins for memory access.

PORT P2 (pins 21 to 28): PORT P2 can


also be used as a general purpose 8 bit
port when no external memory is present,
but if external memory access is required
then PORT P2 will act as an address bus in
conjunction with PORT P0 to access
external memory. PORT P2 acts as A8-
A15, as can be seen from fig 1.1

PORT P0 (pins 32 to 39) PORT P0 can be


used as a general purpose 8 bit port when
no external memory is present, but if
external memory access is required then
PORT P0 acts as a multiplexed address
and data bus that can be used to access
external memory in conjunction with PORT
P2. P0 acts as AD0-AD7, as can be seen
from fig 1.1

PORT P10: asynchronous communication


input or Serial synchronous
communication output.
PIN 11: Serial Asynchronous
Communication Output or Serial
Synchronous Communication clock
Output.

Oscillator Circuits
The 8051 requires an external oscillator
circuit. The oscillator circuit usually runs
around 12 MHz, although the 8051
(depending on which specific model) is
capable of running at a maximum of
40 MHz. Each machine cycle in the 8051 is
12 clock cycles, giving an effective cycle
rate at 1 MHz (for a 12 MHz clock) to
3.33 MHz (for the maximum 40 MHz
clock). The oscillator circuit generates the
clock pulses so that all internal operations
are synchronized.

One machine cycle has 6 states. One state


is 2 T-states. Therefore one machine cycle
is 12 T-states. Time to execute an
instruction is found by multiplying C by 12
and dividing product by Crystal frequency.

T=(C*12d)/crystal frequency

8051 Internal Architecture


Internal schematics of the 8051.
Data and Program Memory
The 8051 Microcontroller can be
programmed in PL/M, 8051 Assembly, C
and a number of other high-level
languages. Some compilers even have
support for compiling C++ for an 8051.

Program memory in the 8051 is read-only,


while the data memory is considered to be
read/write accessible. When stored on
EEPROM or Flash, the program memory
can be rewritten when the microcontroller
is in the special programmer circuit or, if
not using a 8031, through a preinstalled
bootloader.
Program Start Address
The 8051 starts executing program
instructions from address 0000 in the
program memory.

Special Function Register


The Special Function Register (SFR) is the
upper area of addressable memory, from
address 0x80 to 0xFF. A, B, PSW, DPTR are
called SFR.This area of memory cannot be
used for data or program storage, but is
instead a series of memory-mapped ports
and registers. All port input and output can
therefore be performed by memory mov
operations on specified addresses in the
SFR. Also, different status registers are
mapped into the SFR, for use in checking
the status of the 8051, and changing some
operational parameters of the 8051.

General Purpose Registers

The 8051 has 4 selectable banks of 8


addressable 8-bit registers, R0 to R7. This
means that there are essentially 32
available general purpose registers,
although only 8 (one bank) can be directly
accessed at a time. To access the other
banks, we need to change the current bank
number in the flag register.
A and B Registers

The A register is located in the SFR


memory location 0xE0. The A register
works in a similar fashion to the AX
register of x86 processors. The A register
is called the accumulator, and by default it
receives the result of all arithmetic
operations. The B register is used in a
similar manner, except that it can receive
the extended answers from the multiply
and divide operations. When not being
used for multiplication and Division, the B
register is available as an extra general-
purpose register. The A and B registers
can store up to 8-bits of data each.
Retrieved from
"https://en.wikibooks.org/w/index.php?
title=Embedded_Systems/8051_Microcontroller&ol
did=3549516"

Last edited 16 days ago by an anon…

Content is available under CC BY-SA 3.0 unless


otherwise noted.

You might also like