0% found this document useful (0 votes)
71 views17 pages

Anexo 6.3 Análisis de Cortocircuito y Falla A Tierra Veredas Rondon

This document analyzes short circuit and ground fault calculations for an electrical network expansion project in Puerto Rondon. It calculates the available fault current at different points in the system, including 833 amperes from the utility, 375 amperes from the transformer, and lower values ranging from 338 to 790 amperes at various downstream points like the service equipment, panel, and branch circuits. Calculations are shown using the point to point and 'f' factor methods and do not include potential additional current from motors. Conductor sizes and ratings are also provided.

Uploaded by

carlos galvis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
71 views17 pages

Anexo 6.3 Análisis de Cortocircuito y Falla A Tierra Veredas Rondon

This document analyzes short circuit and ground fault calculations for an electrical network expansion project in Puerto Rondon. It calculates the available fault current at different points in the system, including 833 amperes from the utility, 375 amperes from the transformer, and lower values ranging from 338 to 790 amperes at various downstream points like the service equipment, panel, and branch circuits. Calculations are shown using the point to point and 'f' factor methods and do not include potential additional current from motors. Conductor sizes and ratings are also provided.

Uploaded by

carlos galvis
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 17

anexo 6.

3 Análisis de cortocircuito y falla a tierra

INGESSA
EXPANSION DE REDES DE PUERTO RONDON
Available Fault Current Calculation
by:John Sokolik Ver. 6.3
Utility Fault Current 833 amperes kVA = 5 [email protected]
E = 220
I = kVA x 1000 = trans. FLA trans. FLA = 13 0
E x 1.732 0
0
Isca = trans. FLA x 100 13 0
transformer Z
= 3.5 % 0
Isca = ampere short-circuit current RMS symmetrical. Isca = 375 amperes 0
0
Point to Point Method 0
Length (distance) L = 12 0
1.732 x L x I (ASC) Isca = 833 0
'f ' factor
N x C x E L-N # conductors per phase N = 1 0
Phase conductor constant C = 17 Phase Conductor 0
Volt Line to Line E L-L = 220 Volt 0
f = 1.434 0
Neutral conductor constant C = 16,673 Neutral Conductor 0
Multiplier Volt Line to Neutral EL-N = 127 Volt 0
f = 0.002
M= 1
1+f Line to Line M = 0.411
Line to Neutral M = 0.998
Fault Current at Service Equipment

Isca x M = fault current at terminals of main disconnect L- L = 342 amperes


Isca x M = fault current at terminals of main disconnect L- N = 831 amperes

Fault Current fr VIVIENDA

Single Phase Feeder Length (distance) L = 20


2xLxI (ASC) Isca = 342 Phase 831 Neutral
'f ' factor
N x C x E L-N # conductors per phase N = 1
Phase conductor constant C = 1,559 Phase Conductor
Volt Line to Line E L-L = 220 Volt
f = 0.012
Neutral conductor constant C = 1,559 Neutral Conductor
Volt Line to Neutral EL-N = 127 Volt
Multiplier f = 0.051

M= 1 Line to Line M = 0.988


1+f Line to Neutral M = 0.951

Isca x M = fault current at terminal of the panel L- L 338 amperes

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

Isca x M = fault current at terminal of the panel L- N 790 amperes

Calculation does not include motor contribution

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

Branch Circuit Fault

Single Phase Branch Length (distance) L = 100


2xLxI (ASC) Isca = 338 Phase 790 Neutral
'f ' factor
N x C x E L-N # conductors per phase N = 1
Phase conductor constant C = 2,350 Phase Conductor
Volt Line to Line E L-L = 220 Volt
f = 1.000
Neutral conductor constant C = 2,350 Neutral Conductor
Volt Line to Neutral EL-N = 127 Volt
Multiplier f = 1.000

M= 1 Line to Line M = 0.500


1+f Line to Neutral M = 0.500

Isca x M = fault current at terminal of the panel L- L 169 amperes


Isca x M = fault current at terminal of the panel L- N 395 amperes

Calculation does not include motor contribution

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

Three Single conductors Three Single conductors Select Conductor & Raceway
in PVC raceway in Metal raceway Copper in Nonmetallic Racewa
AWG Copper Alum. AWG Copper Alum. Aluminum in Nonmetallic Race
14 389 237 ### 0 0 14 389 237 #VALUE! Copper in Metal Raceway
12 617 376 ### 0 0 12 617 376 #VALUE! Aluminum in Metal Raceway
10 982 599 ### 0 0 10 982 599 #VALUE!
8 1559 952 ### 0 0 8 1559 952 #VALUE!
6 2430 1482 1481.69 0 0 6 2425 1481 1480.571
4 3824 2350 ### 0 0 4 3806 2346 #VALUE!
3 4635 2872 ### 0 0 3 4633 2876 #VALUE! 2 0.3048
2 6044 3730 ### 0 0 2 5907 3713 #VALUE! 1.0000
1 7493 4678 ### 0 0 1 7293 4645 #VALUE!
1/0 9317 5838 ### 0 0 1/0 8925 5777 #VALUE! 0.3048
2/0 11424 7301 ### 0 0 2/0 10755 7187 #VALUE!
3/0 13923 9110 ### 0 0 3/0 12844 8826 #VALUE!
4/0 16673 11174 ### 0 0 4/0 15082 10741 #VALUE!
250 kcmil 18594 12862 ### 0 0 250 16483 12122 #VALUE!
300 kcmil 20868 14923 ### 0 0 300 18177 13910 #VALUE!
350 kcmil 22737 16813 ### 0 0 350 19704 15484 #VALUE!
400 kcmil 24297 18506 0 400 20566 16671
500 kcmil 26706 21391 500 22185 18756
600 kcmil 28033 23451 600 22965 20093
750 kcmil 28304 23492 750 24137 21766
1000 kcmil 31491 28779 1000 25278 23478

Neutral 6
2 0 CU/PVC 16673 16673 6 220 Select Voltage & Phase
1 1.5 AL/PVC 0 0 1.732 Single Phase 240/120
1 CU/MET 0 0 E x 1. Single Phase 220/127 (Mexico)
1 AL/MET 0 0 13.12 Single Phase 208/120
1 Three Phase 208/120
1 Three Phase 220/127
1.5 16673 16673 127 Three Phase 380/220
1 220 Three Phase 416/240
1 Single Phase 480/277
1 Three Phase 480/277
1 Three Phase 600/347

14 Neutral 16,673 11,174 0 1 neut 15,082 10,741


16,673 11,174 0 1.732 x L x I 15,082 10,741
14 Phase 16,673 11,174 0 phase 1 15,082 10,741
1 0 1
0 1 2 Single Phase Single Phase Feeder
2 Three Phase

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

0 0
0 -1
0 0
0 0
0 0 1
0 0
0 0 1
0 -1 -1
u65 1 1
0
DROP DOWN 1 OR 3 u67 1 2 Single Phase Single Phase Branch 0
2 Three Phase 0
7 3823.632 2349.89 0 3806.22 2345.836
3,824 2,350 0 3,806 2,346
0
7 0 3823.632 2349.89 0 0 3806.22 2345.836
0
3 CU/PVC 0 0 Single Phase Branch 1
AL/PVC 2349.89 2349.8944
CU/MET 0 0 1 0
AL/MET 0 0 0
2,350 2,350 -1 0 -1
0 1 1
-1 1 1 1

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

nductor & Raceway


Nonmetallic Raceway
in Nonmetallic Raceway
Metal Raceway
in Metal Raceway

FEET
METERS

S.E. 1
BR 1

2 NEG = BAD

5 1558.7822 951.75787 0
1,559 952 0
0
5 0 1558.7822 951.75787 0 0
0
4 CU/PVC 0 0 Single Phase Feed
AL/PVC 0 0

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

CU/MET 1558.7822 1558.7822


AL/MET 0 0
1,559 1,559

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

1 0
0
0

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

1558.7822 951.75787
1,559 952

1558.7822 951.75787

e Phase Feeder 1

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

calculos electricos
anexo 6.3 Análisis de cortocircuito y falla a tierra

calculos electricos

You might also like