Scribd
Upload
134 views

Module 6-Lathe Machine (Topics) PDF

The document discusses different types of lathe machines and their main parts. It describes various toolholders that can be used, including their shapes and geometry. Different methods for securely holding workpieces are presented. The operations that can be performed on lathe machines are outlined, including turning, drilling, boring, reaming, tapping, grooving and knurling. Guidelines for speeds and feeds for different lathe operations are provided.

Uploaded by

Fayyaz Nadeem
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
134 views

Module 6-Lathe Machine (Topics) PDF

The document discusses different types of lathe machines and their main parts. It describes various toolholders that can be used, including their shapes and geometry. Different methods for securely holding workpieces are presented. The operations that can be performed on lathe machines are outlined, including turning, drilling, boring, reaming, tapping, grooving and knurling. Guidelines for speeds and feeds for different lathe operations are provided.

Uploaded by

Fayyaz Nadeem
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

LATHE MACHINES

Course 
Module Section Unit Topic Page
Outline 
Turning machines
384, 385
Types (Figure: I‐1,I‐3,I‐4,I‐5,I‐6,I‐7,I‐8,I‐9,I‐11,I‐12)
The Engine Lathe (Figure: I‐25) 392
One Main Parts (Figure: I‐26, I‐32, I‐33, I‐34, I‐35) 392, 394
Measuring a lathe for size (Fig. I‐36) 394
Toolholders (Figure: I‐48,I‐53,I‐54,I‐56,I‐57,I‐58,I‐59, I‐65, I‐66, 
Two 399‐404
I‐67 I‐68, I‐69, I‐70, I‐71, I‐72, I‐76) 
Cutting Tool Geometry (Figure: I‐78) 405
Tool Shapes (Figure: I‐83)
Three
Form Tools (Figure: I‐85) 407
Cutoff Tools
Work holding on lathe machines (Figure: I‐113, I‐118, I‐122, I‐ 414,415,  
Four
126, I‐127, I‐129) 417,418
Lathe operations
4.01, 4.02, 
, , 427,433,
Si
Six F i C t d illi D illi
Facing, Center drilling, Drilling, 
6 4.03, 4.04,  I
4.05 Speeds 431
Turning 435
Seven Speeds and Feeds for turning 439
Roughing and Finishing 441
Other Lathe Operations
Drilling 451
Boring 453
Nine Reaming 456
Tapping 458
Recessing, Grooving, and Parting 459
Knurling 461
Eleven External Threading These are the 
operations for 
Twelve Internal Threading
the lathe 
Thirteen Cutting Tapers machine.

You might also like