Scribd
Upload
28 views

Sawing Machines: Course Outline Topics Section Unit Topic

This document provides an outline for a course on sawing machines. It covers various types of sawing machines like reciprocating saws and band saws. It discusses saw blades, including materials, kerf, width, pitch and tooth forms. It also addresses abrasive sawing machines and selecting the proper abrasives. Cutting fluids are mentioned at the end.

Uploaded by

Fayyaz Nadeem
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
28 views

Sawing Machines: Course Outline Topics Section Unit Topic

This document provides an outline for a course on sawing machines. It covers various types of sawing machines like reciprocating saws and band saws. It discusses saw blades, including materials, kerf, width, pitch and tooth forms. It also addresses abrasive sawing machines and selecting the proper abrasives. Cutting fluids are mentioned at the end.

Uploaded by

Fayyaz Nadeem
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SAWING MACHINES

Course Outline
Module Section Unit Topic Page
Topics
Sawing machine and Types 302
Reciprocating saws
Horizontal band cutoff machine
Universal Tilt frame cutoff
302 to306
1.0.1, 1.0.2 Abrasive cutoff machine
Cold saw cutoff machines
Vertical band saw/machines
Advantages of band machines
306, 307, 308
(Figrure G-17 to G-20)
Saw Blades
Blade materials
Blade kerf (Figure G-38)
1 1.0.3 G Blade width, Blade gage, Blade Pitch (Figure G-39) 313, 314
One Saw Teeth, Saw Tooth terminology (Figure G-40)
Tooth Forms (Figure G-41)
Set Patterns (Figure G-42)
1.0.1 Reciprocating cutoff saw (Figure G-44) 315
1.0.3 Comparison of Kerf (Figure G-49) 317
1.0.1 Abrasive Sawing Machines 323
Two Abrasives
324
Selecting abrasive saws
Blade length 327
1.0.3
Problems in band welding (G-89) 329
Three
(Figure G-105) 334
Cutting Fluids 339

You might also like