JOURNAL OF INFORMATION, KNOWLEDGE AND RESEARCH IN

ELECTRONICS AND COMMUNICATION ENGINEERING

ISSN: 0975 – 6779| NOV 16 TO OCT 17 | VOLUME – 04, ISSUE – 02

RASPBERRY-PI BASED ANTI-THEFT SECURITY SYSTEM

WITH IMAGE FEEDBACK
1
DIXIT SURAJ VASANT, 2BABAR APEKSHA ARUN,3MEHER PRIYA SHIVAJI
1, 2,3
Department of Electonics&TelecommunicationEngineering,
ShivnagarVidyaPrasarakMandals College of Engineering
Malegaon(BK),Baramati, Pune,India
1
[email protected]
2
[email protected]
3
[email protected]

ABSTRACT:
The main of this paper is to illustrate the technology used for security purpose. This paper presents the
development process in security system that uses cctv for security purpose. This security system is
implemented using raspberry pi B. By combining the software’s and camera this system is used as an
intelligent monitoring sytem. Total security is provided to owner in a face of image at any instant in
which area it is implemented. Image is send through IOT(on ‘Gmail account of owner’).Technology has
reached a stage where mounting cameras to capture video imagery is cheap,but finding available human
resourse’s to sit and watch is imagery. Like other systems it does’nt require continuous surveillance of
human resourse’s, machine will do the whole work..

KEYWORDS :Raspberrypi, sensors, camera, IOT, Gmail, Gas emitting machine, putty software

1. INTRODUCTION commited. By observing all these parameter we

decided to make an intelligent security system which
This is an Intelligent Monitoring system. An will detect crime or any kind of misdeed action and
intelligent monitoring system is an application which required action will be taken at that instant only.
is developed from the security point of view. The Owner will have to no worry even in his absence due
basic objective of this project is to develop a system to real time image feedback used in this system
that monitors the area in which it is implemented.
This system is applicable in the area where no one is
3. SYSTEM BLOCK DIAGRAM
permissible to enter, also in area where we need to
detect the misdeed activity . In this system CMOS
camera is used and along with that different sensors
have been used. The camera is used to catch the live
images of crime happening, in different direction
through the presence of servomotor. The captured
images are stored in particular folder in raspberry-pi.
The images will be then usefull to work on. As soon
as sensors detect motion, captured images are sent to
mobile through IOT. So that the owner(user) will get
aware of crime taking place and will get real time
image of that. After feedback from owner gas
emitting machine will turn to take required action on
crime.Through this system owner can get real time
image of area anytime in different direction.

2. OBJECTIVE OF PROJECT

Now a days most of the crimes occurs in lavish

shop(jwellery). Secondly in such areas cctv is used.
But work of normal cctv camera is continuous
surveillance of that area under the human resourse.
And crimes are usually found out after it is being

PRESENTED at NC-RDD-EMS-2017 on 18 /03/2017 at RAJGAD DNYANPEETH TECHNICAL CAMPUS (Degree

Engineering and Polytechnic) Dhangawadi, Tal: Bhor, Dist: Pune (Maharashtra). Page 1400
 JOURNAL OF INFORMATION, KNOWLEDGE AND RESEARCH IN
ELECTRONICS AND COMMUNICATION ENGINEERING
ISSN: 0975 – 6779| NOV 16 TO OCT 17 | VOLUME – 04, ISSUE – 02
Fig. 1 Block diagram of Raspberry-pi based anti-theft
security system with image feedback
4. BLOCK DIAGRAM DESCRIPTION

1.Rasp-pi Camera:-
OV5647 color CMOS QSXGA is a 5 megapixel
camera, which is capable of capturing real time
images and video.The fps(frames per second) of this
camera is 120.

Fig. 2 Raspberry pi3(model B)

Raspberry pi is Broadcom BCM2837 64bit ARMv7

Quad Core Processor powered Single Board
Computer running at 1.2GHz
Inbuit::
* BCM43143 WiFi on board
*Bluetooth Low Energy (BLE) on board
*Micro SD port for loading your operating system
and storing data
*1GB RAM
*40pin extended GPIO
*4 x USB 2 ports
*4 pole Stereo output and Composite video port
*Upgraded switched Micro USB power source (now
2.Stepper motor:- supports up to 2.4 Amps)
A stepper motor is a brushless DC electric motor *CSI camera port for connecting the Raspberry Pi
that divides full rotation into a number of equal steps. camera.
The motors position can then be commanded to move
and hold at one of these steps without any feedback.
sensor, as long as the motor is carefully sized to the 4.Sound detector:-
application in respect to torque and speed. The sound detector is a small board that combines
Microphone and some processing circuitry. It
provides not only an audio output, but also a binary
3.PIR Sensor:- indication of the prescence of sound, and an analog
PIR sensors allow you to sense motion, almost representation of it’s amplitude.
always used to detect whether a human has moved in
or out of the sensors range. They are small,
inexpensive, low-power, easy to use and don't wear 5.Temperature sensor:-
out. For that reason they are commonly found in A temperature sensor is a device, typically, a
appliances and gadgets used in homes or businesses. thermocouple or RTD, that provides for temperature
They are often referred to as PIR, "Passive Infrared", measurement through an electrical signal. A
"Pyroelectric", or "IR motion" sensors thermocouple is made up of two dis-similar metals
that generate electrical voltage in direct proportion to
3.RASPBERRY PI3 (MODEL B):- changes in temperature.

6.The main module of the Project

1.Camera interfacing
2.Image capturing and storing
3.Hardware interfacing
4.Motion Detection
5.Explosion Detection
6.Sound Detection

PRESENTED at NC-RDD-EMS-2017 on 18 /03/2017 at RAJGAD DNYANPEETH TECHNICAL CAMPUS (Degree

Engineering and Polytechnic) Dhangawadi, Tal: Bhor, Dist: Pune (Maharashtra). Page 1401
 JOURNAL OF INFORMATION, KNOWLEDGE AND RESEARCH IN
ELECTRONICS AND COMMUNICATION ENGINEERING
ISSN: 0975 – 6779| NOV 16 TO OCT 17 | VOLUME – 04, ISSUE – 02
5. WORKING 7.RESULT

This proposed system is an intelligent system and it

eliminates the need of continuous surveillance by
human resourse. Thus, any human extra work is ruled
out. In this project raspberry pi 3B(model) has been
used as heart of system.
This system continuously checks the status of place
by sensors that Is anyone entering in the shop or not.
And sends the alert message to the owner with live
images by rotating camera with different angles.
In this security system human bodies are detected by
PIR sensor while other , that are detected by
ultrasonic sensor.
The main aim of this project is to make an automated Fig. 3 Image sent on Gmail.
security system for lavish shop(jwellary).The project
consists of raspberrypi with camera,sensors and Image given above is sent on owner’s G-mail id or
alarm. The whole system is placed in that place.if whats app account.
system detect someone in shop it sets the
alarm,capture the live images and sens it on e-mail. 8.CONCLUSION
And wait for the feedback. After getting positive
feedback it sets the gas emitting machine. The expected aim of this project is to make an
automated system for security purpose. Timestamped
6. FLOWCHART image capturing let users capture details of events
precisely at that instant .Advances in PC based
surveillance software now allow anyone with a
webcam to setup a robust, effective and inexpensive
surveillance system.

9.APPLICATIONS

1.Jwellary Shop
2.Army Surveillance
3.Bank Security
4.Museum Security
5.Home Security

10.REFERENCE

1.”AkshadaDeshmukh,HarshlataWadaskar,
Leenazade”,”Webcam based intelligent surveillance
system”,
2. Research inventy;international journal of engg and
science-vol.2 issue8(march 2013),pp38-42.
3. An Improved Motion Detection Method for Real-
Time Surveillance Nan Lu,JihongWang,Q.H.Wu and
Li Yang(19 February 2008).
4. Implementation of Webcam based system for
surveillance monitoring
,BrahmanandhhaPabhuR,ArulPrabharA,GarimaBohra
,Proceeding of ASCNT-2010,CDAC,Noida,India.
5. Mohemed F Abdelkader,Integrated Motion
Detection and Tracking for Visual
Surveillance(ICVS2006).
Fig:- flow chart

PRESENTED at NC-RDD-EMS-2017 on 18 /03/2017 at RAJGAD DNYANPEETH TECHNICAL CAMPUS (Degree

Engineering and Polytechnic) Dhangawadi, Tal: Bhor, Dist: Pune (Maharashtra). Page 1402