Scribd
Upload
61 views

Microcprocessors and Microcontrollers Lab

This document outlines 13 experiments for a microprocessors and microcontroller lab course. The experiments include arithmetic operations, string manipulation, and interfacing with components like ADCs, DACs, interrupts, motors, and more using microprocessors like the 8085 and 8086 as well as microcontrollers like the 8051. Experiments 1-10 are to be done with a simulation kit while 11-13 use Keil software. The total number of experiments is 13.

Uploaded by

kskumargie
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
61 views

Microcprocessors and Microcontrollers Lab

This document outlines 13 experiments for a microprocessors and microcontroller lab course. The experiments include arithmetic operations, string manipulation, and interfacing with components like ADCs, DACs, interrupts, motors, and more using microprocessors like the 8085 and 8086 as well as microcontrollers like the 8051. Experiments 1-10 are to be done with a simulation kit while 11-13 use Keil software. The total number of experiments is 13.

Uploaded by

kskumargie
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

MICROPROCESSORS AND MICROCONTROLLER LAB - ECB333

LTPC
0 0 3 1

LIST OF EXPERIMENTS

1. Addition and Subtraction of two 8bit numbers using 8085.


2. Multiplication and Division of two 8bit numbers using 8085.
3. Addition and Subtraction of two 16 bit numbers using 8086.
4. Multiplication and Division of two 16 bit numbers using 8086.
5. Programs for String manipulation operations using 8086.
6. Interfacing ADC
7. Interfacing DAC.
8. Parallel Communication between two MP Kits using Mode 1 of 8255.
9. Interfacing and Programming 8279, 8259.
10. Interfacing and Programming 8253.
11. Programming using Arithmetic, Logical and Bit Manipulation instructions of 8051
microcontrollers (at least 2 programs)
12. Interfacing and Programming of Stepper Motor Speed control.
13. Interfacing and Programming of DC Motor Speed control.

Note: Experiment number 1-10 to be conducted using simulation kit.


11, 12, 13 to be conducted using keil software

TOTAL = 45

You might also like