Beetroot Production Guideline 2014
Beetroot Production Guideline 2014
PRODUCTION GUIDELINE
C U S TO M E R S E R V I C E S : 0 8 6 0 7 8 2 7 5 3 • W W W. S TA R K E AY R E S . C O. Z A • M E M B E R O F T H E P L E N N E G Y G R O U P
SEEDS OF SUCCESS
BEETROOT
1. INTRODUCTION
1.1 HISTORY AND BACKGROUND
Beetroot (Beta vulgaris) is an indigenous species to Europe and spread eastwards into the Western
regions of Asia. It is thought to have developed from B. maritima the sea-beet which is native to
Southern Europe. In its first season beetroot produces green tops and an enlarged taproot which
serves as a storage organ for nutrients. The following season the stored nutrients in the taproot are
used to produce flowers and seeds.
2. ADAPTABILITY
2.1 CLIMATIC REQUIREMENTS
Optimum growing temperature: 12 - 19°C
Maximum growing temperature: 35°C
Soil temperatures for germination: > 7°C
3. CULTIVATION PRACTICES
3.3 SOWING
The seed is generally large with a corky exterior. It is a seed cluster or glomerule containing 2 - 6
seeds. One seed (cluster) can therefore give rise to more than one seedling. This seed is known as
multi-germ seed. The corky exterior provides both a physical barrier to germination and contains a
phenolic compound which inhibits germination. Germination usually takes between 10 to 24 days.
C U S TO M E R S E R V I C E S : 0 8 6 0 7 8 2 7 5 3 • W W W. S TA R K E AY R E S . C O. Z A • M E M B E R O F T H E P L E N N E G Y G R O U P
SEEDS OF SUCCESS
3.3.2 PLANT SPACING
Due to the fact that most seed is multi-germ, the use of precision seeders is considered unnecessary.
However recent studies have shown that even with precision planters population stands of beet
appear more uniform in shape compared with conventional row plantings. Seed is usually sown in slit
trenches 2cm deep. Planting in rows is to facilitate the mechanical removal of weeds without
disturbing the beet crop. In-row spacing is between 5 and 10cm depending on the size requirement
needed at harvest and between row spacing ranges from 20 – 45cm.
3.4 FERTILIZATION
3.4.1 SOIL ACIDITY AND LIMING
A soil pH range of 6.0-6.8 is adequate for beets.
.
3.4.2 FERTILIZATION GUIDELINE
It is important not to give too few or too many plant nutrients, therefore the soil must first be
analysed so that the plants will not be burned, or show poor growth.
3.4.2.1 NITROGEN
On sandy soils, apply between 110 kg - 200 kg N/ha. Broadcast 50% of the N should be applied prior
planting and incorporated. The remainder of the nitrogen should be applied as a side-dressing 10, 20,
30 and 40 days after sowing. On heavy soils, apply between 40 kg 60kg N/ha.
3.4.2.2 PHOSPHORUS
No limit is normally set for the safe rate at which phosphates may be applied, however, a rate of 50 -
100kg P/ha will cover any possible shortfall.
3.4.2.3 POTASSIUM
Potassium fertilizer should be added based on a reliable soil test as it can cause plant injury if applied
at an incorrect rate. Beetroot in general require a total of 150kg K/ha applied over an 8 week period.
3.4.2.4 BORON
Boron deficiency shows up as a breakdown and corky, dark discolouration of internal and external
tissues. Foliar sprays have generally given faster and more effective results. Spray when the young
plants are about 8 cm high.
C U S TO M E R S E R V I C E S : 0 8 6 0 7 8 2 7 5 3 • W W W. S TA R K E AY R E S . C O. Z A • M E M B E R O F T H E P L E N N E G Y G R O U P
SEEDS OF SUCCESS
4. HARVESTING
Beetroot is normally ready for harvest between 75 and 90 days in summer and 100 and 120 days in
winter. Due to the variable nature of beetroot and uneven spacing from multi-germ seed, harvesting
generally occurs in stages. The first harvest is a thinning out process where beetroot sized between
3.0 and 4.0 cms in diameter. The majority of the beetroot can be harvested when it attains a width of
7.5cm. This can be done manually or mechanically using modified potato harvesters.
The harvested yield will vary significantly as a result of climate, fertilization, disease infestation and
variety planted, but average yields range between 15 and 25 tons per hectare. Some growers can
achieve yields of 40 - 45 tons.
The other large segment is the bunching market where beet, usually harvested by hand to
ensure tops do not get damaged, is sold as a bunch of 4 -5 roots with the tops still attached.
The quality of the tops is indicative of the freshness of the roots.
The final market segment is the specialised, processing market. The quality standards set for
this market segment are very stringent. Colour and fibre/sugar content are very important to
processors. Smaller, softer beetroots are washed, blanched and canned/bottled whole, whilst
the larger roots are suited to slicing and dicing as they tend to be more fibrous and less
tender as a result of their age.
.
6. POSTHARVEST
Beetroot quality indices are based on root shape, root size, uniform and intensive colour (with
minimum zoning), firmness, smoothness, cleanness, trimming of rootlets and freedom from defects.
Beetroot can be stored quite successfully under certain conditions. Prior to storage, beets should be
topped and sorted to remove all diseased or mechanically damaged roots. Large roots store better
than smaller ones, as they shrivel relatively slower.
6.1 STORAGE
Bunched beets should be pre-cooled to below 4°C within 4 6 hours after harvest. They can be kept for
around 10 14 days at 98% relative humidity (R.H.). Mature beetroot should be pre-cooled within 24
hours of harvest to below 5 °C. These should be topped and may be stored at 1 2 °C, at 98% R.H. for
4 6 months. Freezing injury occurs from -0.5 °C.
INDEMNITY
All technical advice and/or production guidelines given by STARKE AYRES or any of its personnel with reference to the use of its
products, is based on the company’s best judgement. However, it must be expressly understood that STARKE AYRES does not
assume responsibility for any advice given or for the results obtained.
C U S TO M E R S E R V I C E S : 0 8 6 0 7 8 2 7 5 3 • W W W. S TA R K E AY R E S . C O. Z A • M E M B E R O F T H E P L E N N E G Y G R O U P
SEEDS OF SUCCESS