ANEXO 3

. Fig. 6: DCL de la estructura cargada con su propio peso.

Fig. 7: Desplazamiento de la estructura cargada con su propio peso.

RESUMEN DE INFORMACIÓN DEL PROCESO DE CÁLCULO EN EL SOFTWARE

Design Analysis

Project created on DateTime no válido..

Last updated on 27/11/2007.

Project checked on 27/11/2007.

Summary
Model Information
Analysis Type - Static Stress with Linear Material Models
Units - Custom - (N, mm, s, deg C, K, V, ohm, A, J)
Model location - D:\IVAN\ALGOR\CURSO
2007\tesis\Estructura\Estructura_Deformaciones

Analysis Parameters Information

Load Case Multipliers
Static Stress with Linear Material Models may have multiple load cases. This allows
a model to be analyzed with multiple loads while solving the equations a single time.
The following is a list of load case multipliers that were analyzed with this model.

Load Pressure/Surface Displaced

Acceleration/Gravity Thermal Voltage
Case Forces Boundary
1 0 1 0 0 0

Gravity Information
The following lists the values used if acceleration or gravity was included in the
analysis. The Acceleration/Gravity direction multiplier is multiplied by the
Acceleration Due To Body Force which is then multiplied by the
Acceleration/Gravity load case multiplier.

Acceleration Due To Body Force = 9814.56 mm/s²

Acceleration/Gravity X Acceleration/Gravity Y Acceleration/Gravity Z

Multiplier Multiplier Multiplier
0 0 -1

Multiphysics Information
Default Nodal Temperature 0 °C
Source of Nodal Temperature None
Time step from Heat Transfer Analysis Last

Processor Information
Type of Solver Sparse
Disable Calculation and Output of Strains No
Calculate Reaction Forces No
Invoke Banded Solver Yes
Avoid Bandwidth Minimization No
Stop After Stiffness Calculations No
Displacement Data in Output File No
Stress Data in Output File No
Equation Numbers Data in Output File No
Element Input Data in Output File No
Nodal Input Data in Output File No
Centrifugal Load Data in Output File No

Part Information
Part ID Part Name Element Type Material Name
1 Part 1 Beam Steel (ASTM-A36)
2 Part 2 Beam Steel (ASTM-A36)
3 Part 3 Beam Steel (ASTM-A36)

Element Properties used for:

 Part 1

Element Type Beam

Section 1 - Area 339.99932
Section 1 - SA2 0
Section 1 - SA3 0
Section 1 - J1 2913.6199792
Section 1 - I2 45785.456816
Section 1 - I3 45785.456816
Section 1 - S2 1704.254656
Section 1 - S3 1704.254656

Element Properties used for:

 Part 2

Element Type Beam

Section 1 - Area 150.96744
Section 1 - SA2 0
Section 1 - SA3 0
Section 1 - J1 416.2314256
Section 1 - I2 9157.0913632
Section 1 - I3 9157.0913632
Section 1 - S2 507.998984
Section 1 - S3 507.998984

Element Properties used for:

  Part 3

Element Type Beam

Section 1 - Area 157.5
Section 1 - SA2 0
Section 1 - SA3 0
Section 1 - J1 23700
Section 1 - I2 11850
Section 1 - I3 11850
Section 1 - S2 894.3
Section 1 - S3 894.3

Material Information
Steel (ASTM-A36)

Material Model Standard

Material
Algor Material Library
Source
Material
C:\ARCHIV~1\ALGOR\MatLibs\algormat.mlb
Source File
Date Last
1999/06/02-11:03:56
Updated
Material Structural Steel Mechanics of Materials, 2nd Edition, F.P. Beer and
Description E.R. Johnston, Jr. (mechanical)
Mass Density 0.0000000078548 N*s^2/mm/mm³
Modulus of
199950 N/mm²
Elasticity
Poisson's Ratio 0.29

Load and Constraint Information

Loads
Load Set 1: Unnamed

Nodal Forces

ID Description Node Magnitude Vx Vy Vz Load Coordinate

 ID Case System ID
1 Unnamed 44 -27.8 0 0 1 1 0
2 Unnamed 45 -27.8 0 0 1 1 0
3 Unnamed 34 -46.05 0 0 1 1 0
4 Unnamed 35 -46.05 0 0 1 1 0

Constraints
Constraint Set 1: Unnamed

Nodal Boundary Conditions

Node
ID Description Tx Ty Tz Rx Ry Rz
ID
9 Unnamed 38 Yes Yes Yes Yes Yes Yes
10 Unnamed 39 Yes Yes Yes Yes Yes Yes
11 Unnamed 41 Yes Yes Yes Yes Yes Yes
12 Unnamed 43 Yes Yes Yes Yes Yes Yes

Processor Output
Processor Summary

ALGOR (R) Static Stress with Linear Material Models

Version 12.32-WIN 27-JUN-2003
Copyright (c) 1984-2003 ALGOR, Inc. All rights reserved.

DATE: NOVEMBER 27,2007

TIME: 05:13 PM
INPUT MODEL: D:\IVAN\ALGOR\CURSO
2007\tesis\Estructura\Estructura_Deformaciones
ALG.DLL VERSION:13240000

-------------------------------------------------

Structural

1**** CONTROL INFORMATION

number of node points (NUMNP) = 51

number of element types (NELTYP) = 3
number of load cases (LL) = 1
number of frequencies (NF) = 0
analysis type code (NDYN) = 0
 equations per block (KEQB) = 0
bandwidth minimization flag (MINBND) = 0
gravitational constant (GRAV) = 9.8146E+03

**** PRINT OF NODAL DATA SUPPRESSED

**** PRINT OF EQUATION NUMBERS SUPPRESSED
**** PRINT OF TYPE-2 ELEMENT DATA SUPPRESSED
**** PRINT OF TYPE-2 ELEMENT DATA SUPPRESSED
**** PRINT OF TYPE-2 ELEMENT DATA SUPPRESSED
**** Hard disk file size information for processor:

Available hard disk space on current drive = 17662.457

megabytes

1**** NODAL LOADS (STATIC) OR MASSES (DYNAMIC)

NODE LOAD X-AXIS Y-AXIS Z-AXIS X-AXIS Y-AXIS

Z-AXIS
NUMBER CASE FORCE FORCE FORCE MOMENT MOMENT
MOMENT

34 1 0.000E+00 0.000E+00 -4.605E+01 0.000E+00 0.000E+00

0.000E+00
35 1 0.000E+00 0.000E+00 -4.605E+01 0.000E+00 0.000E+00
0.000E+00
44 1 0.000E+00 0.000E+00 -2.780E+01 0.000E+00 0.000E+00
0.000E+00
45 1 0.000E+00 0.000E+00 -2.780E+01 0.000E+00 0.000E+00
0.000E+00

1**** ELEMENT LOAD MULTIPLIERS

load case case A case B case C case D

case E
--------- ---------- ---------- ---------- ---------- -----
-----

1 0.000E+00 1.000E+00 0.000E+00 0.000E+00

0.000E+00

**** Invoking Sparse Solver ...

**** Symbolic Assembling Using the Row-Hits Matrix Profile ...

**** Assembled in One Block.
**** Real Sparse Matrix Assembly ...

1**** STIFFNESS MATRIX PARAMETERS

minimum non-zero diagonal element = 2.6938E+03

maximum diagonal element = 1.3316E+09
maximum/minimum = 4.9432E+05
average diagonal element = 1.1840E+08

in the upper off-diagonal matrix:

number of entries in the profile = 3558
number of symbolic nonzero entries= 2523
number of real nonzero entries = 692
**** Sparse Matrix Assembled in One Block
**** Load case 1
**** Sparse Matrix Factorization ...
Completing in-core sparse solution
 **** Sparse Matrix Solving ...
**** End Sparse Matrix Solution

Reaction Sums and Maxima for Load Case 1

Sum of applied forces

X-Force Y-Force Z-Force X-Moment Y-Moment
Z-Moment
0.0000E+00 0.0000E+00 -5.4795E+02 0.0000E+00 0.0000E+00
0.0000E+00

Sum of reactions
X-Force Y-Force Z-Force X-Moment Y-Moment
Z-Moment
8.8818E-16 -1.0658E-14 -3.5527E-14 -2.1556E+03 -1.7789E+02 -
4.4591E+03

Sum of residuals
X-Force Y-Force Z-Force X-Moment Y-Moment
Z-Moment
8.8818E-16 -1.0658E-14 -5.4795E+02 -2.1556E+03 -1.7789E+02 -
4.4591E+03

Sum of unfixed direction residuals

X-Force Y-Force Z-Force X-Moment Y-Moment
Z-Moment
1.8529E-11 1.1994E-11 -3.9402E-10 -1.7434E-09 1.0270E-09
8.8291E-11

Largest applied forces and moments

Node Node Node Node Node
Node
X-Force Y-Force Z-Force X-Moment Y-Moment
Z-Moment
0 0 34 0 0
0
0.0000E+00 0.0000E+00 -5.6272E+01 0.0000E+00 0.0000E+00
0.0000E+00

Largest nodal reactions

Node Node Node Node Node
Node
X-Force Y-Force Z-Force X-Moment Y-Moment
Z-Moment
41 38 41 41 41
41
-3.9418E+00 2.4363E+01 -1.6679E+02 3.8959E+04 -3.0297E+02 -
1.3845E+03

Largest nodal residuals

Node Node Node Node Node
Node
X-Force Y-Force Z-Force X-Moment Y-Moment
Z-Moment
41 38 41 41 41
41
-3.9418E+00 2.4363E+01 -1.6952E+02 3.8959E+04 -3.0297E+02 -
1.3845E+03

Largest unfixed direction residuals

 Node Node Node Node Node
Node
X-Force Y-Force Z-Force X-Moment Y-Moment
Z-Moment
35 24 36 27 4
15
1.3195E-11 2.1888E-11 -3.2605E-10 -5.3194E-10 4.0737E-10
4.0649E-11

1**** TEMPORARY FILE STORAGE (MEGABYTES)

----------------------------------
UNIT NO. 7 : 0.002
UNIT NO. 8 : 0.002
UNIT NO. 9 : 0.000
UNIT NO. 10 : 0.000
UNIT NO. 11 : 0.004
UNIT NO. 12 : 0.002
UNIT NO. 13 : 0.002
UNIT NO. 14 : 0.000
UNIT NO. 15 : 0.000
UNIT NO. 17 : 0.000
UNIT NO. 51 : 0.004
UNIT NO. 52 : 0.060
UNIT NO. 54 : 0.001
UNIT NO. 55 : 0.003
UNIT NO. 56 : 0.005
UNIT NO. 58 : 0.002

TOTAL : 0.087 Megabytes

Processor Log

ALGOR (R) Static Stress with Linear Material Models

Version 12.32-WIN 27-JUN-2003
Copyright (c) 1984-2003 ALGOR, Inc. All rights reserved.

Structural
51 3 1 0 0 0
**** Linear stress analysis
**** Memory Dynamically Allocated = 261528 KB

Options executed are:

NOMIN
STRAIN
SPARSE
SUPCNF
SUPELM
SUPNOD
REAC
ENOR

processing ...
 **** OPENING TEMPORARY FILES
NDYN = 0

DATE: NOVEMBER 27,2007

TIME: 05:13 PM
INPUT MODEL: D:\IVAN\ALGOR\CURSO
2007\tesis\Estructura\Estructura_Deformaciones
ALG.DLL VERSION:13240000

**** BEGIN NODAL DATA INPUT

51 NODES
**** END NODAL DATA INPUT
**** BEGIN TYPE-2 DATA INPUT
35 ELEMENTS
**** END TYPE-2 DATA INPUT
**** BEGIN TYPE-2 DATA INPUT
18 ELEMENTS
**** END TYPE-2 DATA INPUT
**** BEGIN TYPE-2 DATA INPUT
4 ELEMENTS
**** END TYPE-2 DATA INPUT
**** Hard disk file size information for processor:

Available hard disk space on current drive = 17662.457

megabytes

**** BEGIN LOAD INPUT

Load factor = 1.00E+00 in the 2nd basket in load case 1
**** END LOAD INPUT

**** Invoking Sparse Solver ...

**** Symbolic Assembling Using the Row-Hits Matrix Profile ...

**** Assembled in One Block.
**** Real Sparse Matrix Assembly ...
in the upper off-diagonal matrix:
number of entries in the profile = 3558
number of symbolic nonzero entries= 2523
number of real nonzero entries = 692
**** Sparse Matrix Assembled in One Block
**** Load case 1
**** Sparse Matrix Factorization ...
**** Sparse Matrix Solving ...
**** End Sparse Matrix Solution

**** BEGIN DISPLACEMENT OUTPUT

**** PRINT OF DISPLACEMENT OUTPUT SUPPRESSED
**** END DISPLACEMENT OUTPUT
**** BEGINNING REACTION COMPUTATIONS
**** LOADCASES REMAINING 1
**** BLOCKS REMAINING 1
**** GROUPS REMAINING 3
**** GROUP USED--ELEMENT/GLOBAL CONTRIBUTIONS
35 ELEMENTS
35 ELEMENTS REMAINING
30 ELEMENTS REMAINING
20 ELEMENTS REMAINING
10 ELEMENTS REMAINING
**** GROUPS REMAINING 2
**** GROUP USED--ELEMENT/GLOBAL CONTRIBUTIONS
 18 ELEMENTS
18 ELEMENTS REMAINING
10 ELEMENTS REMAINING
**** GROUPS REMAINING 1
**** GROUP USED--ELEMENT/GLOBAL CONTRIBUTIONS
4 ELEMENTS
4 ELEMENTS REMAINING
**** ENDING REACTION COMPUTATIONS

Estructura_Deformaciones.t7 = 1.930 kilobytes

Estructura_Deformaciones.t8 = 2.480 kilobytes
Estructura_Deformaciones.t9 = 0.000 kilobytes
Estructura_Deformaciones.t10 = 0.000 kilobytes
Estructura_Deformaciones.t11 = 3.750 kilobytes
Estructura_Deformaciones.t12 = 1.922 kilobytes
Estructura_Deformaciones.t13 = 1.930 kilobytes
Estructura_Deformaciones.t14 = 0.000 kilobytes
Estructura_Deformaciones.t15 = 0.000 kilobytes
Estructura_Deformaciones.t17 = 0.000 kilobytes
Estructura_Deformaciones.t51 = 4.453 kilobytes
Estructura_Deformaciones.t52 = 61.898 kilobytes
Estructura_Deformaciones.t54 = 0.984 kilobytes
Estructura_Deformaciones.t55 = 2.703 kilobytes
Estructura_Deformaciones.t56 = 5.406 kilobytes
Estructura_Deformaciones.t58 = 1.922 kilobytes

total temporary disk storage (megabytes) = .08728

Estructura_Deformaciones.l = 6.455 kilobytes

Estructura_Deformaciones.do = 2.438 kilobytes

**** BEGIN DELETING TEMPORARY FILES

Processing completed for model:
[D:\IVAN\ALGOR\CURSO
2007\tesis\Estructura\Estructura_Deformaciones]
**** TEMPORARY FILES DELETED
**** END OF SUCCESSFUL EXECUTION

Total actual hard disk space used = 0.096 megabytes

Sub-total elapsed time = 0.012 minutes

ALGOR (R) Stress Calculation Utility

Version 12.16-WIN 25-APR-2003
Copyright (c) 1989-2003 ALGOR, Inc. All rights reserved.

**** Memory Dynamically Allocated = 261528 KB

Percent capacity: .005828

DATE: NOVEMBER 27,2007

TIME: 05:13 PM
INPUT......D:\IVAN\ALGOR\CURSO
2007\tesis\Estructura\Estructura_Deformaciones
Percent capacity: .005831
Percent capacity: .005831
**** BEGIN TYPE-2 DATA INPUT
 35 ELEMENTS
Percent capacity: .006178
0 elements remaining
**** END TYPE-2 DATA INPUT
**** BEGIN TYPE-2 DATA INPUT
18 ELEMENTS
Percent capacity: .006178
0 elements remaining
**** END TYPE-2 DATA INPUT
**** BEGIN TYPE-2 DATA INPUT
4 ELEMENTS
Percent capacity: .006178
0 elements remaining
**** END TYPE-2 DATA INPUT
Percent capacity: .005837
**** Writing stress and strain output files ...
0 load cases remaining
**** Hard disk file size information for postprocessor:
Estructura_Deformaciones.son = 10.098 kilobytes
Estructura_Deformaciones.nso = 4.531 kilobytes
Estructura_Deformaciones.sto = 4.531 kilobytes

Total MKNSO disk space used = 0.01871 megabytes

**** End of successful execution
**** MKNSO elapsed time = 0.002 minutes

**** The TOTAL elapsed time = 0.014 minutes

Stress Analysis
The stress analysis output file (D:\IVAN\ALGOR\CURSO
2007\tesis\Estructura\Estructura_Deformaciones.S) was not found.

Weight and Center of Gravity Analysis

The weight and center of gravity analysis output file (D:\IVAN\ALGOR\CURSO
2007\tesis\Estructura\Estructura_Deformaciones.WCG) was not found.
Fig. 8: Desplazamiento de la estructura cargada con su propio peso a nueve veces la escala
real.

Fig. 9: Esfuerzo de la estructura cargada con su propio peso.