Scribd Logo
Upload

Welcome to Scribd!

  • 29 views

    Stainless Steel Flux Cored Tig: Alloy Description and Application

    Uploaded by

    NGUYEN VINH
    This document provides information about flux cored welding rods produced by U.S. Alloy Co., including alloy descriptions and applications, typical welding procedures, chemistry, specifications, and available sizes. The rods are primarily used for root passes on piping where backing and purging gas may not be possible. Welding procedures note using the rods on DCEN with 100% argon as the shielding gas. Chemistry information is provided for grades R308L, R309L, R316L and R347. Rods are available in sizes from 2.2mm diameter and 915mm length.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd

    Stainless Steel Flux Cored Tig: Alloy Description and Application

    Uploaded by

    NGUYEN VINH
    29 views1 page
    This document provides information about flux cored welding rods produced by U.S. Alloy Co., including alloy descriptions and applications, typical welding procedures, chemistry, specifications, and available sizes. The rods are primarily used for root passes on piping where backing and purging gas may not be possible. Welding procedures note using the rods on DCEN with 100% argon as the shielding gas. Chemistry information is provided for grades R308L, R309L, R316L and R347. Rods are available in sizes from 2.2mm diameter and 915mm length.

    Original Description:

    This is flux cored TIG rod for root pass welding of SS without purging gas

    Original Title

    Flux cored TIG rod

    Copyright

    © © All Rights Reserved

    Available Formats

    PDF, TXT or read online from Scribd

    Did you find this document useful?

    Is this content inappropriate?

    This document provides information about flux cored welding rods produced by U.S. Alloy Co., including alloy descriptions and applications, typical welding procedures, chemistry, specifications, and available sizes. The rods are primarily used for root passes on piping where backing and purging gas may not be possible. Welding procedures note using the rods on DCEN with 100% argon as the shielding gas. Chemistry information is provided for grades R308L, R309L, R316L and R347. Rods are available in sizes from 2.2mm diameter and 915mm length.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    29 views1 page

    Stainless Steel Flux Cored Tig: Alloy Description and Application

    Uploaded by

    NGUYEN VINH
    This document provides information about flux cored welding rods produced by U.S. Alloy Co., including alloy descriptions and applications, typical welding procedures, chemistry, specifications, and available sizes. The rods are primarily used for root passes on piping where backing and purging gas may not be possible. Welding procedures note using the rods on DCEN with 100% argon as the shielding gas. Chemistry information is provided for grades R308L, R309L, R316L and R347. Rods are available in sizes from 2.2mm diameter and 915mm length.

    Copyright:

    © All Rights Reserved
    Download as PDF, TXT or read online from Scribd
    Download as pdf or txt
    You are on page 1of 1

    U.S. ALLOY CO.

    STAINLESS STEEL dba Washington Alloy


    7010-G Reames Rd.
    Flux Cored Tig Charlotte, NC 28216
    www.weldingwire.com

    Quality Management System


    in accordance with
    ISO 9001:2000
    Cert # 05-R0925
    ALLOY DESCRIPTION AND APPLICATION;
    These flux cored rods are primarily used for the root pass on piping where backing and
    purging gas may not be possible or desirable. This rod should be used as a basic tig rod
    on DCEN, however caution is advised due to the easily removable slag covering that
    must be removed prior to addition welding.

    TYPICAL GTAW WELDING PROCEDURES; DCEN 100% Argon


    Wire Diameter Amps Volts
    2.2mm (.087”) 100-250 12-13
    Procedures may vary with change in position, base metals, filler metals, equipment and other
    changes.

    TYPICAL UNDILUTED METAL CHEMISTRY (%) per AWS A5.22;

    Chemistry
    Grade 1) Intended Use
    C Cr Ni Mo
    R308L 0.03 18.0-21.0 9.0-11.0 0.50 Welding of 18Cr & 8Ni such as 304, 304L
    R309L 0.03 22.0-25.0 12.0-14.0 0.50 Welding of carbon steel to austenitic stainless
    R316L 0.03 17.0-20.0 11.0-14.0 2.0-3.0 Primarily use on 316 or 316L
    R347 2) 0.08 18.0-21.0 9.0-11.0 0.50 Primarily use on 347
    1) All grades has the following : Mn=0.50-2.5, Si=1.2, P=0.04, S=0.03 Cu=0.50 Single values are maximum
    2) R347 also has Cb+Ta =8xCmin. -1.0 max.
    Grade Tensile Strength, minimum Elongation Percent, minimum
    R308L 75,000 35
    R309L 75,000 30
    R316L 70,000 30
    R347 75,000 30

    AVAILABLE SIZES: TST 308LT1-5 = Rods of 2.2mm x 915mm


    TST 309LT1-5 = Rods of 2.2mm x 915mm
    TST 316LT1-5 = Rods of 2.2mm x 915mm
    TST 347LT1-5 = Rods of 2.2mm x 915mm
    SPECIFICATIONS: Washington Alloy per AWS for stainless flux cored rods chemistry only

    EAST COAST GULF COAST WEST COAST


    7010-G Reames Rd 4855 Alpine Drive #190 8535 Utica Ave
    Charlotte, NC 28216 Stafford, TX 77477 Rancho Cucamonga, CA 91730
    Tel (888) 522-8296 Tel (877) 711-9274 Tel(800)830-9033
    Fax (704)598-6673 Fax (281)313-6332 Fax (909)291-4586
    9-2008 DC

    Washington Alloy Company believes that all information and data given is correct. Use this information to assist in making your
    own evaluations or decisions and this information should not be mistaken as an expressed or implied warranty. U.S. ALLOY CO.
    assumes no liability for results or damages incurred from the use of any information contained herein, in whole or in part.
    .

    You might also like