Tips & Techniques in

Preanalytics

1
Prof. Dr. Ralf Lichtinghagen
Foreword

Prof. Dr. rer. nat. Ralf Lichtinghagen obtained his doctorate after The brochure “Tips and Techniques in Preanalytics” is particularly aimed at doctors
studying chemistry and biology at Ruhr University Bochum in of medicine, healthcare providers, nurses and medical staff in clinics and doctors’
the field of neurobiochemistry. At the beginning of the 1990s practices.
he undertook further training at Hannover Medical School
By working through this brochure the reader should gain a comprehensive
(‘MHH’) to qualify as a Clinical Chemist/European Specialist in
impression of the many different aspects of preanalysis.
Laboratory Medicine (EuSpLM). He acquired his authorization to
teach Clinical Chemistry at a university and he currently works The sections concerning the collection of analysis materials are specially tailored to
as Chief Clinical Chemist in the Central Laboratory of MHH. In the use of Sarstedt systems (S-Monovette®, Microvette®, Minivette®, etc.) and, after
addition to his responsibilities in patient care and research, he also gives lectures in specialised familiarisation has taken place, they make it easier to use the described
Clinical Chemistry / Laboratory Diagnostics in the medicine course of studies. collection techniques properly, particularly for new users.
He is also academic head of the Medical Laboratory Assistants School. Within the As a Clinical Chemist I am particularly well aware of the importance of preanalytics
national laboratory medicine society (‘DGKL’) he organises revision courses in the within the process as a whole – from the laboratory request and sample collection to
subject of Clinical Chemistry for specialised scientists undergoing further training the interpreted laboratory findings. After all, preanalytics in particular accounts for a
and for junior doctors. His main areas of research at the MHH’s Institute of Clinical major part of laboratory medicine quality management.
Chemistry are Molecular Diagnostics and new biomarkers. Error-free application of laboratory medicine diagnostics is only possible if the
relevant influencing factors and interfering factors are strictly taken into account. This
brochure particularly addresses that issue and especially aims to sensitise clinical
colleagues to the topic. It is they who, in their capacity as clients requesting medical
laboratory diagnostics, make a major contribution towards ensuring that the process
as a whole can take place with as little disruption as possible, by performing sample
collection properly.

Prof. Dr. Ralf Lichtinghagen

2 3
Table of contents

1 What is preanalytics? Pages 6-9 6 Blood gas 56-61

1.1 Principles of preanalytics? 7 6.1 Type of blood collection 57
1.2 Common consequences of preanalytical errors 8 6.2 Storage 58
1.3 Communication as a key to success 9 6.3 Avoiding errors 58-59
2 Influencing factors and interfering factors 10-19 6.4 Collection technique – Blood Gas Monovette® 60-61
2.1 Influencing factors 11 7 Safety when collecting blood 62-67
2.1.1 Non-modifiable influencing factors 12 - 14 7.1 Safety needle 64
2.1.2 Modifiable influencing factors 14-17 7.2 Safety-Multifly® needle 65
2.2 Interfering factors 18-19 7.3 Multi-Safe disposal boxes 66-67
3 Venous blood collection 20-27 8 Centrifugation 68-73
3.1 Patient preparation 21 8.1 Correct handling for centrifugation 69
3.2 What is the responsibility of the person collecting the blood? 21 8.2 Difference between fixed-angle and swing-out rotors 70
3.3 Identification 22-24 8.3 Serum collection 71
3.4 Application 25 8.4 S-Monovette® centrifugation conditions 72
3.5 Order of draw 26 8.5 Gel ascent during centrifugation 73
3.6 Avoiding underfilling 27 9 Haemolysis – what is it? 74-79
4 Carrying out venous blood collection 28-43 9.1 In vivo haemolysis 76
4.1 Standard conditions for blood collection 29 9.2 In vitro haemolysis 77
4.2 Obtaining diagnostic samples: 12 steps 29 9.3 Consequences of haemolysis 78
4.3 Tourniquet application and puncture sites 30-31 9.4 Clinical relevance 79
4.4 Problems before/during blood collection 32 10 Storage and transport 80-87
4.5 Aspiration technique and vacuum technique 33 10.1 Sample transport 81-82
4.5.1 S-Monovette® aspiration technique 33-35 10.2 Influence of temperature, time and cellular metabolism 83-87
4.5.2 S-Monovette® vacuum technique 36
11 Capillary blood collection 88-99
4.5.3 A summary of the 2 collection techniques 37
11.1 Carrying out capillary blood collection 89-91
4.6 Blood collection from catheters 38-39
11.1.1 Safety Lancet and Safety Incision Lancet 92-94
4.7 Blood collection for blood culture diagnostics 40
11.1.2 Microvette® – order of draw and techniques 95-97
4.7.1 Hygienic requirements 41
11.2 Centrifugation conditions for capillary blood collection 98
4.7.2 Handling during blood collection 42
11.3 Minivette® POCT 99
4.7.3 Sample volume and number of vials 43
12 Urine sample collection 100-111
5 Blood collection in paediatrics 44-55
12.1 Sample collection 101
5.1 Medical history 45
12.2 Storage and transport 101
5.2 Prerequisites for blood collection 46
12.3 Types of analyses 102 - 103
5.3 Blood collection in paediatrics 46
12.4 Types of urine samples 104 - 107
5.3.1 Venous blood collection 47-48
12.5 Handling urine sample collection systems 108-111
5.3.2 Capillary blood collection 49-51
5.4 The difference between capillary blood and venous blood 51 13 List of references 114 - 115
5.5 Reference ranges 52-54 14 Index 116 - 122
5.6 Haemostasis in paediatrics 54-55 15 Imprint 123

4 5
1 What are
preanalytics? 1.1 Principles of preanalytics
On average, the preanalytical phase accounts for about 57%1 of the entire process
between the patient and the analysis result. This phase includes the indication,
informing and identifying the patient, sample collection with subsequent transport,
and storage until centrifugation and sample distribution.
In short, it involves a large number of different steps and areas.

1
Guder et al.; Proben zwischen Patient und Labor; 2009

The range of possibilities for influencing and changing analytical results during
individual steps in this process is correspondingly large.

Note: About 25% of errors in preanalytics have

consequences for the patient!

It is all the more important for every participant to be informed of the potential
influences and sources of error, so that with this awareness they can act
appropriately in order to avoid errors. After all, a test result can only be as good as is
permitted by the patient sample obtained.

“Preanalytics comprises all the processes that occur

before the laboratory analysis.”

6 7
1.2 Common consequences of preanalytical errors 1.3 Communication as a key to success
Can values be changed during blood collection? Communication between those persons involved in blood collection facilitates work
procedures, avoids misunderstandings and prevents preanalytical errors due to
missing or incorrect information.
Common errors

Patient
Haemolysis Underfilling Blood clot

Medical Attending
laboratory physician

44 %2 17 %2 8 %2
2
Adapted from: Bonini et al; Errors in Laboratory Medicine; Clin Chem 48:5; 691-698 (2002)

Note: Problems in the area of preanalytics can never be resolved by a

single individual but only by close cooperation of the persons
involved such as doctors, medical assistants, nursing personnel
or the laboratory.

Aim
Note: 70-85% of clinical decisions are based on the
results of laboratory analyses! 3 Standardised conditions for …
sPreparing for the blood collection
sBlood collection procedure
3
Foubister, Vida. Cap Today Bench press: The Technologist/technician shortfall is putting the squeeze on laboratories nationwide
September 2000; Datta, P. Resolving Discordant Samples. Advance for the Administrators of Laboratories; July 2005: p.60. sStorage/transport to the laboratory

Result
sSafety for patients
sProcess cost reduction (working time!)

8 9
2 Influencing factors
and interfering 2.1 Influencing factors
factors What responsibility does the patient bear?
sCorrect details from their medical history
sMedication (list, possibly discontinue)
sNutrition (particular diet, fasting)
sCorrect collection (blood, urine, faeces, etc.)

For correct details concerning medical history, it is important that appropriate

questions are asked before sample collection.

Taking into account possible influencing factors is important because:

Influencing factors change the concentration of analytes.

The effect on the concentration depends on the medical condition and must
be considered when evaluating the results.

The list of influencing factors and interfering factors in the following section is not
exhaustive. Various examples are presented to illustrate the issues.

“From blood collection and the generation of

plausible analysis results to result interpretation,
it is absolutely essential to have detailed knowledge
of influencing factors and interfering factors, and
take them into consideration.”

10 11
2.1.1 Non-modifiable influence factors

Population (Race) Age

Significant differences in blood values can be found in African populations With increasing age there is often an increase in the cholesterol value in both
when compared with European populations. In African populations: sexes. The activity of alkaline phosphatase in blood plasma is influenced by bone
- Leucocyte counts are significantly lower metabolism and is therefore highest in children during the growth phase and after
bone fractures.
- The vitamin B12 concentration is 1.35 times higher
In infants there are higher bilirubin, haematocrit and HbF levels (for more examples
- The reference ranges for creatinine, CK and alpha amylase are much higher
see Section 5 – Blood collection in paediatrics).
In Asians the activity of alcohol dehydrogenase is lower than in Europeans. There is
That is why age-dependent reference ranges are desirable, but often non-existent,
also a higher level of lactose intolerance in the Asian population.
for many parameters.

Gender
Apart from other gender-specific components (e.g. hormones) muscle mass has an
impact on various parameters.
300
- CK and creatinine are dependent on muscle mass so men are usually found to 250
have much higher levels
Cholesterol
200
- For many parameters it is appropriate to use gender-specific reference ranges
150 LDL

mg/dl
Pregnancy 100
1
There is a 5-fold increase in the erythrocyte sedimentation rate during pregnancy. 50
HDL
1
Guder et al.; Proben zwischen Patient und Labor; 2009 5
0
Sarstedt; Tipps & Tricks in der Präanalytik; 2014
15 25 35 45 55 65
Years
5
Sarstedt; Tips & Techniques in Preanalytics; 2014

+100 %
Triglycerides
Leucocytes
CHOL Biological rhythm
Deviations in % AP Vitamin D production (25-OH) fluctuates over the course of a year. In summer,
Iron higher UV levels mean that more vitamin D is synthesised than in winter.
Total protein
-20 0 20 40 60 80 100

4
Seelig et al; Präanalytik; 2008

12 13
 Circadian rhythm Substance use: Alcohol
Also known as rhythmical daily fluctuation, referring to expected differences in Chronic alcohol abuse causes an increase in liver enzymes, e.g. Ȗ-GT, AST/ALT
concentration throughout a day for certain clinical chemistry parameters and whilst folic acid and vitamin B6 values decrease.
endocrinological parameters (e.g. renin, cortisol, adrenaline, noradrenaline, VMA
and TSH). +1000 % a-GT
With such parameters the time of collection is of fundamental importance. Follow-up AST
measurements should always be collected at the same time of day. As a rule, the Noradrenaline
time of the collection must be documented and communicated to the laboratory. Adrenaline
Alternatively, 24 hour composite samples (e.g. urine or saliva) can be useful to Deviations in % Cortisol
establish comparable results. Cortisol as a stress indicator is a familiar example. Triglycerides
The highest cortisol concentration can be measured in the mornings. CHOL
VMA
Note: LDL
30
Cortisol The circadian rhythm (the -50 0 50 150 250 350 450
25 biological clock) can be disrupted 4
Seelig et al; Präanalytik; 2008
20 by travelling to different time
μg/dl

15 zones and/or shift work. If

parameters have been affected
10 by daily rhythm, this issue Substance use: Nicotine
5 should be included in questions Chronic nicotine use increases the counts of leucocytes, tumour markers such as
0 concerning medical history. CEA (highly significant in men) and placental AP (PLAP).
0 6 12 18 24
5
ACE
Sarstedt; Tips & Techniques in Preanalytics; 2014
Prolactin
`-carotenoids
Deviations in % Pyridoxal phosphate
Selenium
HDL cholesterol
2.1.2 Modifiable influencing factors LDL cholesterol
Cholesterol
Haematocrit
Drug use MCV
In the case of regular drug use, e.g. cannabis, heroin or morphines, clinical Fibrinogen
chemistry parameters can change in the blood. Below are some examples of these Copper
MCHC
changes:
Cadmium
With cannabis use the levels of chloride, urea, insulin, potassium and sodium Monocytes
increase in the blood. In contrast, glucose, uric acid and creatinine levels fall. Lymphocytes
The levels of cholesterol, potassium and thyroxine increase during heroin use. Granulocytes
During the intake of morphines there is a rise in ALT, amylase, AP, bilirubin, lipase, -60 -40 -20 0 20 40 60 80 CEA
prolactin and TSH. Insulin and noradrenaline decrease during morphine use. 3
Seelig et al; Präanalytik; 2008

14 15
 Substance use: Caffeine Effect of body position
Even 200 mg caffeine (2 cups robusta coffee or 2-4 cups arabica coffee) increases The distribution of water in the body depends on the position of the body. This leads
levels of adrenaline, noradrenaline and cortisol (cortisol +40%). to parameters such as blood cells, proteins and substances bound to proteins being
more concentrated in seated patients than in lying patients.
Medication use
Under the influence of penicillin and ibuprofen, the level of potassium in plasma can HDL cholesterol
increase, whilst under the influence of insulin it decreases. With penicillin use, the Haematocrit
thromboplastin time (Quick) increases. Erythrocytes Increase in %

Due to the intake of acetylsalicylic acid (ASA) the levels of AST (GOT), ALT (GPT), Aldosterone
creatinine and uric acid rise, depending on the dose. Adrenaline
The medication phenobarbital, which is used to treat epilepsy and for anaesthesia Renin
induction, has an enzyme-inducing effect. The activity of AP and y-GT increases 0 10 20 30 40 50 60
whilst bilirubin concentration in the blood decreases.
5
Sarstedt; Tips & Techniques in Preanalytics; 2014
Diuretics also have an effect on the electrolyte balance. This is seen, dependent on
the substance class, in the levels of potassium, calcium and magnesium, for example.
If pantoprazole (proton pump inhibitor) has been administered, the concentration of Diet-related changes
calcium in the blood may be reduced. Changes in analyte concentrations with 4 weeks of fasting or after a standard meal
Laxatives can lead to a reduction in potassium. of 800 kcal.

Physical activity Analyte Change in %

Physical activity, as compared with the condition at rest, can cause an increase in Fasting Standard meal
various clinical chemistry parameters in the blood. Albumin, total protein - 10 +5
Creatine kinase (CK) Bilirubin + 15
Pyruvate kinase
AST (GOT) Calcium +5
Urea a-glutamyltransferase (a-GT) - 50
Uric acid
Inorg. phosphate Glucose + 15
Glucose AST (GOT) + 30 + 20
Albumin
ALT (GPT) + 10
Calcium
x-fold increase in the values Alk. phos. Uric acid + 20 +5
Sodium
Urea - 20 +5
Potassium
Potassium + 10
1 2 3 4 5
5
Sarstedt; Tips & Techniques in Preanalytics; 2014
Creatinine + 20
Physical activity in this case refers to exceptional physical stress. For healthy people, Phosphorus + 15
this can be a marathon whereas for bedridden patients just the journey to the clinic Triglycerides - 40
can count as exceptional physical stress. 4
Seelig et al; Präanalytik; 2008

16 17
2.2 Interfering factors Interference factors are classified as internal (endogenous) or external (exogenous).
Examples of interference factors are described below:
Interfering factors can alter test results and cause disruptions, depending on Internal interference factors (endogenous)
methods used.
By changing the test method it may be possible to eliminate interfering factors. Cause Consequence
- Gilbert’s syndrome
→ Hyperbilirubinemia = jaundice
- Crigler-Najjar syndrome
- Acute hepatitis → Possible disruption, e.g. in
- Acute liver failure cholesterol, creatinine, uric acid

- Spherocytosis → Haemolysis
- Immune haemolysis → Significant falsification of a large
- Haemolytic antibodies number of methods of optical
- Haemoglobinopathy measurement
→ Higher measurements due to the
release of erythrocytes
(e.g. potassium, LDH, AST)
- Hyperlipoproteinemia → Lipaemia
- Lipid metabolism disorder → Patient not fasting at time of blood
collection
→ Significant distortion of a large
number of methods of optical
A B C D measurement False-low levels
in electrolyte analyses (sodium,
potassium) due to dilution effect
- Haematocrit > 65% → Elevation of PTT and aPTT6
- Haematocrit < 20% → Reduction in PTT and aPTT
Image Description Possible cause
6
G. Endler et al; The importance of preanalytics for the coagulation laboratory; Hämostaseologie 2/2010; 30: 63-70
A Lipaemia Disease-related or patient did not fast

B Jaundice Syndrome or disease-related External interference factors (exogenous)

C Haemolysis Preanalytical error or disease-related Cause Consequence

- Medication (infusion solution, antibiotics,
D Normal Good and correct preanalytical conditions blood products)
- Anticoagulants (contamination due to → False measurements
carryover from preparation) (elevation and reduction possible)
- Contamination (bacteria, fungi, bacterial
biofilm from CVC for blood culture)
- Cycling or riding → Can increase the PSA value

18 19
3 Venous blood
collection 3.1 Patient preparation
Informing the patient
sInforming the patient about the forthcoming procedure helps to alleviate possible
anxiety and stress.

Explaining certain regulations

that must be complied with should supplement the patient information, e.g.
sUse of medications
sAdherence to a particular diet
sSample collection when fasting (except for emergency diagnostics)

Children in particular require careful preparation but the information must be adapted
to their ability to understand.

3.2 What is the responsibility of the person

collecting the blood?
sOrganisation of the blood collection
sCorrect documentation (patient identification and time of day)
sInstructing and preparing the patient for the sample collection
sPreparation of the sample (centrifugation if necessary)
sStorage until collection (refrigeration/heating if necessary)
“Venous blood is the most important material tested to
answer medical questions. Note: Communication with the laboratory and, where
necessary, with the transport service is essential for
Correct blood collection technique is thus of the transport and correct storage!
considerable significance.”

You can find more information in Section 10 – Transport & storage.

20 21
3.3 Identification Identification of the sample

Patient identification sNever analyse sample containers that are not clearly identified.
sSurname sBarcode labels enable reliable identification.
sFirst name sIdentification should always be placed on the primary receptacle.
sDate of birth sUse only waterproof felt-tip pens for glass or plastic containers.
sPossibly: admission number, ward, room number sAdditives (anticoagulants, clot activators, gel) are identified by
colour coding of the sample container. A lack of international
standardisation means that additional identification may be
Errors occur not only with common names. necessary.
Important: Always ask direct questions.
Never: “You are Mr Miller?” Never use the lid, outer packaging or
transport container to identify the sample.
When asked of patients who are partially/completely deaf or cognitively impaired,
such questions may be simply answered with an affirmative nod.
The person seated on the side of the bed may just be a visitor.

If the identity of the patient is not clear, samples should not be

collected until there is further clarification.

Identification of the person collecting the blood

It must be possible to determine the identity of the person who collected the
sample.
sPlace identification on the request form if appropriate
Questions about the type and time of the collection, the patient’s condition and
other important details may be of use in case of unclear results.

Identification of the ordering doctor

The identity of the requesting doctor makes it possible to ask questions in the event of
sillegible requests (e.g. referral notes)
serroneous requests (e.g. prostate phosphatase for a female patient)
srestriction to the most relevant analyses if the volume of the sample material is too
small

22 23
Legal requirements & labelling 3.4 Application
sThe submitted analysis material and any parts of this material must be able to be
clearly assigned to one patient. If this is not possible, the material must not be
processed by the medical laboratory. Preparation Application

7
RiLiBÄK; § 6.1.7. Part A
Serum Clinical chemistry, serology, special analyses

Solution: Label sample tube with the barcode immediately before collecting
the blood.
Serum gel Clinical chemistry, serology (only routine diagnostics)

Barcode-line Lithium
Plasma collection for clinical chemistry, serology
heparin

✗ ✗ EDTA K Haematology (e.g. Hb, Ht, erythrocytes, leucocytes)

Citrate 1:10 Coagulation analyses (e.g. Quick, PTT, TT, fibrinogen)

sSample tubes are correctly labelled if: ✗ ✗ ✗ ✗ ✓ Citrate 1:5

BSG determination according to Westergren or
S-Sedivette®
Š the contents are still freely visible
Š it is possible to check the filling volume
Š the screw cap can be easily removed
Š the tube and label do not get stuck or Fluoride Glucose determination (24 h stability) Lactate
stick together in the centrifuge

GlucoEXACT Glucose determination (48 h stability, at RT)

24 25
3.5 Order of draw 3.6 Avoiding underfilling
In the past, the correct order of draw was repeatedly and intensively discussed. The To avoid erroneous measurements or rejection of samples in the laboratory due to
latest findings and studies show that when using a modern blood collection system, underfilling, a precise filling volume is necessary. This should be taken into account
carryover of additives is highly unlikely with proper handling of a closed blood for all preparations.
collection system. For example, when collecting with the Safety-Needle and the Precise filling of the blood collection system is of particular importance for citrate
S-Monovette®, no carryover of EDTA is detected.8 tubes for coagulation analyses.
In case of carryover of EDTA into a serum or heparin tube, potassium may be Underfilling here results in an excess of citrate in the tube (ratio of blood to
elevated and calcium lowered, for example.9 preparation). Because citrate binds calcium, more calcium will thus be bound than is
To ensure the greatest possible safety even for the worst possible conditions during expected. This has a direct effect on the analysis results.
blood collection, we nevertheless recommend adhering to one of the following If when collecting blood with a Safety-Multifly®-Needle, citrate blood is collected first,
drawing orders: this leads to underfilling due to the dead volume in the tubing.
8
RA Sulaiman, Effect of order of draw samples during phlebotomy on routine biochemistry results; J Clin Pathol. 2011 Nov;64(11):1019–20
9
RR Calam et al; Recommended “Order of Draw” for Collecting Blood Specimens into Additive-Containing Tubes; Clin. Chem.;
Vol. 28, No. 6, 1982
Note: The longer the tubing used,
the greater the underfilling

Recommended order of draw

Dead volume = volume in the tubing:
According to Gurr : 10
According to CLSI : 11 30 cm tubing: > 450 μL
20 cm tubing: > 300 μL Underfilling!
Blood culture Blood culture
8 cm tubing: > 120 μL

Serum/Serum-Gel blood Citrate blood

Citrate blood Serum/Serum-Gel blood

Therefore, to fill/vent the tubing, a tube (citrate/neutral) is first used and then
discarded (empty tube/discard tube). Only then is the actual citrate tube to be used.
Heparin/Heparin-Gel blood Heparin/Heparin-Gel blood

EDTA blood EDTA blood

Fluoride/Citrate-fluoride blood Fluoride/Citrate-fluoride blood

10
Gurr et al “Musterstandardarbeitsanweisung Präanalytik” J Lab Med 2011
11
CLSI Procedures for the Collection of Diagnostic Blood Specimens by Venipuncture, Approved Standard,
6th edition GP 41-A6 (former H3-A6), 27 (26) 2007

26 27
4 Carrying out
venous blood 4.1 Standard conditions for blood collection
collection sNo unusual, extreme physical activities in the 3 days prior to blood collection
sNo alcohol excess on the day before (abstain from alcohol for 24 hours)
sFasting between 7 pm and 9 am (i.e. no eating for 12 to 14 hours, drinking water
is allowed)
sRest for at least 10 minutes before the blood collection (sitting or lying)
sAvoid pumping! Opening and closing the fist leads to a considerable increase in
the potassium level (up to 2 mmol/L)
sApply a tourniquet for a maximum of 1 min. (better 30 seconds)
sPuncture vessel, loosen tourniquet, collect blood
sMedications: in consultation with the doctor, take or discontinue

4.2 Obtaining diagnostic samples: 12 steps

1. Disinfect hands! Wear gloves!
2. Apply tourniquet
3. Observe veins and select one
4. Disinfect!
5. Do not touch the puncture site again!
6. Remove the protective sleeve from the Safety-Needle!
7. Face the bevelled edge of the needle upwards!
8. Keep the puncture angle less than 30°!
9. Pull the skin until it is taut, fix the vein!
10. Possibly forewarn the patient!
“The technique for venous blood collection 11. Loosen the tourniquet when the blood starts to flow!
– step by step – for correct procedure in the clinic” 12. Collect sample; note the order of draw!

28 29
4.3 Tourniquet application & puncture sites Stasis time
Stasis lasting longer than 1 minute can lead to shifts in the concentration of
Disinfect in accordance with a
measurements. In the case of high-molecular substances (e.g. total protein) and
valid hygiene plan
protein-bound calcium, false-high measurements can occur (generally very relevant
for parameters with relatively narrow reference ranges). Potassium levels can drop
as constriction time increases.

Comparison – 2 min stasis versus 6 min stasis

Apply the tourniquet one hand’s
width above the puncture site 15
A
The pulse must be perceptible
(tourniquet pressure:
50-100 mmHg)
10
A hand’s width above Bilirubin
Bilirubin

Medical deviation of t0 in %
the puncture site Cholesterin
Cholesterin
Eisen, ALT
Iron, ALT
Maximum constriction time: Protein, GGT
Protein, GGT
Albumin, CK
1 min. Albumin,CK
AST, TG
AST, TG

5
5

Calcium
Calcium
3 4
2 Kreatinin
Creatinine

0
6 Natrium
Natrium

1
Glucose
Glucose

Kalium
Potassium
-5

Puncture sites
➊ Basilic vein 2 4 6

➋ Median cubital vein (this refers to the non-blue translucent, thick, deep vein Constriction time (min)
that is only visible as a bulge at this point)
➌ Cephalic vein, runs on the thumb side 12
Lichtinghagen et al.: Einfluss der Stauzeit auf normalisierte Laborwerte; J Lab Med 2013; 37(3): 131–137
➍ Cephalic vein
➎ Basilic vein
➏ Dorsal venous network of hand

30 31
4.4 Problems before/during blood collection 4.5 Aspiration and vacuum technique
Very difficult vein conditions
sLook for another puncture site
4.5.1 S-Monovette® aspiration technique
sApply a heat pack or warm cloth
sUse Safety-Multifly® needle
sUse the aspiration method to collect the blood

Stopping blood flow during collection

Needle opening is up against IMPORTANT:
the vein wall
sJust before puncturing the skin, lock the Safety-Needle to the S-Monovette® by
Solution:
twisting it slightly clockwise.
Withdraw the needle slightly until the flow
is restored.

Needle has pierced the vein

Solution:
Withdraw the needle slightly until the

✓
blood flow is restored.

Vein has collapsed sUse the thumb of the free hand to pull the skin taut.
Solution: Hold the vein in place. Forewarn the patient and puncture the vein.
As soon as the vein is successfully punctured, the first drop of blood enters the
Wait until the vein has recovered, then
S-Monovette®. This lets the user know that the vein has been reached.
carefully aspirate.

sPumping the fist leads to an increase in K+ and Mg2+ due to muscle activity
sExtended stasis changes parameters such as K+, a-GT
sBending the Safety-Needle is not necessary when using the S-Monovette®
system because the penetration angle is very flat. Changing the lumen by
bending the needle can damage cells (haemolysis). sLoosen the tourniquet and slowly withdraw the plunger.
sHaemolysis can also be caused by using a needle that is too narrow. Wait until the blood flow stops.

32 33
 Snap

✓ ➁

 Click
➀
sChange the S-Monovette for multiple collections. Remove
®

the S-Monovette® from the Safety-Needle by turning it slightly

anticlockwise. The needle remains in the vein.
IMPORTANT: For all S-Monovettes, when blood collection
is complete, withdraw the plunger into the
“snap” position and break off.

Pull the plunger Only then should

After blood collection straight back until you break the
the piston locks plunger off.
in with an audible SNAP!
CLICK.

 
 Pull the piston right Ö
out to the end Ö
sFirst remove the S-Monovette® and then withdraw the
Safety-Needle from the vein.

SNAP!
CLICK!

34 35
4.5.2 S-Monovette® vacuum technique 4.5.3 A summary of the 2 collection techniques

Aspiration technique Vacuum technique

Snap

✓ Click
➀
➁

sThe Safety-Needle must already be in the vein before the collection.

As a rule, we recommend filling the first S-Monovette® with the aspiration
technique so that the blood collection starts gently. The collection can then
continue using the vacuum technique.
sImmediately before blood collection, pull the plunger back and lock the piston into
the base of the S-Monovette (“click”). Then break off the plunger (“snap”).
sPush the evacuated S-Monovette® onto the Safety-Needle and secure by twisting
clockwise.


 


sWait until the blood flow stops, remove the S-Monovette® from the Safety-Needle
and then remove the Safety-Needle from the vein.

36 37
4.6 Blood collection from catheters Haemolysis risk factor: Catheter

Blood collection from catheters With blood collection from catheters, the vacuum technique is not recommended
should be avoided due to possible due to the high flow velocities of the blood. This is associated with a high risk of
distortion of measurements. haemolysis.14-17
Haemolysis and contamination
from infusions are possible risks. Using the aspiration technique, slow, gentle filling18 of the S-Monovette® is
However, if blood collection from possible. This greatly reduces the risk of haemolysis.
a catheter is unavoidable, comply
with the following: 14
Margo A et al.; Obtaining blood samples from peripheral intravenous catheters: best practice; AJCC, 9.2009, 18 (5)
15
Lippi et al.; Prevention of hemolysis in blood samples collected from intravenous catheters; Clin Biochem 46: 561–564, 2013
16
Heyer et al.; Effectiveness of practices to reduce blood sample hemolysis in EDs: A laboratory medicine best practices systematic review
and meta-analysis Clin Biochem 45: 1012-1032, 2012
17
Grant MS; The Effect of Blood Drawing Techniques and Equipment on the Hemolysis of ED Laboratory Blood Samples; J Emerg Nurs
sTo avoid dilution effects and contamination, at least 15 minutes should elapse 18
29:116-121, 2003
Benso S; Can a blood sample for diagnostic exams be drawn from a peripheral venous catheter?; Assist Inferm Ric; 34(2):86-92;
between the last infusion and the blood collection. The time depends on the Apr-Jun 2015
infusion and should comply with internal hospital regulations.6
sRecommendations for the time of blood collection after infusions1

Earliest time (hours) for blood collection after

Infusion
ending the infusion1
Multi-Adapter – the direct connection
Lipid emulsion 8
Carbohydrate-rich solution 1
The S-Monovette® can be directly connected to the catheter with the Multi-Adapter.
The use of single-use syringes and the associated risk of haemolysis and cross-
Amino acids, protein hydrolysate 1
contamination can be avoided.
Electrolytes 1

sIf the catheter has been rinsed with solution containing heparin, it should be
rinsed with saline before blood collection for coagulation analyses.13
sBefore the blood collection, at least 5-10 ml of blood should be discarded. To
avoid any mix-ups, this tube should be appropriately labelled.13
As a rule, a note to the laboratory that the sample was collected from a catheter can
simplify the interpretation of any implausible analytical results. For therapeutic drug
monitoring (TDM), the risk of a contamination must be noted in particular. See page
of traces of medication can lead to erroneously high results.

1
Guder et al; Proben zwischen Patient und Labor; 2009
6
G. Endler et al; The importance of preanalytics for the coagulation laboratory; Hämostaseologie 2/2010
13
M. Spannagl et al; Hämostaseologische Globaltests; Hämostaseologi 1/2006

sThe Multi-adapter can be connected to the S-Monovette® with Luer connections,

e.g. in vitro catheter or three-way stopcock.

38 39
4.7 Blood collection for blood culture diagnostics 4.7.1 Hygiene requirements

Sepsis is known colloquially as blood poisoning. What is not as well known is that False-positive blood cultures result, as a rule, from improper hygiene measures and
the mortality (lethality) is about 50%19. may be associated with extended hospitalisation, unnecessary antimicrobial therapy,
additional diagnostics and considerable extra costs.21

Common symptoms:
sApathy/weakness
Blood collection using blood culture flasks must be done in accordance with the
sFever, chills hygiene requirements.
sConfusion
sLaboured and rapid breathing
sRapid pulse, low blood pressure
To avoid contamination, the following steps are necessary:
sCold hands and feet with poor blood flow (centralisation)
1. Hygienic hand disinfection
2. Wear gloves
Sepsis is an emergency that requires the earliest possible diagnosis and immediate 3. Disinfection of the puncture site (e.g. with 70% isopropyl alcohol or skin
treatment: international and national treatment guidelines stipulate administration of disinfectant)
antibiotics within one hour. Before administering antibiotics, at least 2 blood cultures a. Apply the disinfectant and distribute by wiping
must be collected. b. Apply disinfectant again and let it dry for 60 seconds

It is recommended to collect the blood at the start of a fever episode from a Important: After the skin disinfection, do not palpate the puncture site again.
peripheral vein.
4. Disinfect the blood culture flasks
Blood collection from a venous access (e.g. CVC) is not suitable.
a. Remove the cap
b. Disinfect the rubber septum
The validity is affected to a high degree by the avoidance of contamination, the
transport time, storage conditions and communication of clinical information.21

The following information should be communicated to the laboratory20:

sSite of collection
sDate of collection
sPatient identification
sSuspected diagnosis
sDetails of the ongoing antibiotic therapy if applicable

19
Pschyrembel; 2004
20
J. P. Borde et al; Abnahme von Blutkulturen; Dtsch Med Wochenschr; 135:355-358; 2010
21
Simon et al; Blutkulturdiagnostik – Standards und aktuelle Entwicklungen; J Lab Med; 36(4):199–207; 2012 21
Simon et al; Blutkulturdiagnostik – Standards und aktuelle Entwicklungen; J Lab Med; 36(4):199–207; 2012

40 41
4.7.2 Handling during blood collection

1. Carry out the hygiene steps listed above. 4. You can then carry out the blood collection
21G 21G
Connect the universal blood culture adapter in the usual manner with the Safety-Multifly®
to the guide sleeve of the Safety-Multifly® needle.
needle.
Puncture the vein and fix the needle in
2
place.
1

2 2

1 1

2. Insert the blood culture flask in an upright/

vertical position into the holder. The culture Important:
medium of the flask must not contact the lid sThe manufacturer’s instructions for handling the blood culture flasks must be
of the blood culture flask. followed.
Because of the vacuum in the blood culture sAfter the blood collection, the contents must be carefully mixed.
flask, it fills automatically. sDo not aerate the flask as this is not necessary.
sThe inoculated flask must be sent at room temperature to the laboratory as
Note: Note the filling volume. quickly as possible.

3. If additional blood collections are required

21G 21G
with the S-Monovette®, remove the universal 4.7.3 Sample volume and number of flasks
blood culture adapter from the guide sleeve
of the Safety-Multifly® needle. Note:
The blood volume should be checked during the collection using the scale. The
vacuum volume of the flask may be larger than the required filling volume.
Marking the filling level on the flask before the collection simplifies checking the
1 1 blood filling volume during the collection.
2 2
The sensitivity of the blood culture diagnostics depends on the number of pairs
collected and the sample volume.
There are different recommendations regarding blood volume, number of blood
culture pairs and the use of aerobic and anaerobic flasks.
Always follow the manufacturer’s information for this reason.

42 43
5 Blood collection
in paediatrics Paediatrics
Paediatrics is the branch of medicine dealing with children and adolescents. An
important focus of paediatrics is neonatology, the treatment of premature infants.
Premature infants are viable from week 23 of pregnancy provided the infants have a
birth weight of about 500 grams.
These small patients have special needs and place high demands on personnel and
collection systems.

5.1 Medical history24

The details of the paediatric medical history are obtained by asking a third party,
usually a parent or legal guardian.
School-aged children should always be asked directly.

The medical history should include the following information

sDetails of the current illness
sThe complete medical history of the child
sDetails of the pregnancy and birth
sThe medical history of the families of the parents

Important:
A child may still present in relatively good general condition despite a life-threatening
disease. The patient may deteriorate during the recording of the medical history, the
clinical examination or even after hospitalisation.

“Paediatric and neonatal patients have special needs

and place high demands on personnel and 24
Speer et al; Pädiatrie; 2013

collection systems”

44 45
5.2 Prerequisites for blood collection 5.3.1 Venous blood collection

Between 7 months and 3 years of age, resistance from the child may prevent normal For venous blood collection, there is a choice between closed venous blood
blood collection. collection and the drip technique (e.g. from a cephalic vein).

To ease the situation, the following tips may help: Puncture site
Premature
Neonate Infant Toddler School child
infant
sShorter waiting times
Cephalic vein Only if < 1 week Recommended Recommended - -
sBright, warm and child-friendly rooms with toys for all
ages Brachial vein Perhaps Perhaps Perhaps Recommended Recommended
sSmall gifts (particularly plasters, bravery awards, etc.)
Back of hand Recommended Recommended Possible Recommended Recommended
sFriendly, understanding atmosphere
sIf necessary, treat the child on the parent’s lap Top of foot Recommended Recommended Possible Perhaps (painful) -

sWarm hands and equipment

sConsider feelings of embarrassment even in childhood

Closed venous blood collection

Thanks to the option for gentle blood collection
using the aspiration technique (see Section
4 – Carrying out venous blood collection), the
5.3 Blood collection in paediatrics S-Monovette® combined with the short
Safety-Multifly® needle is the optimal solution
The total blood volume of a healthy neonate is about 300 ml. A premature infant of for difficult vein conditions in paediatrics.
1,000 g has a total blood volume of about 80 ml. Because of this small volume, it is
essential to collect as little blood as possible while still ensuring as much blood as
necessary is collected.
In addition, sample collection from premature infants, neonates and infants can be
problematical. Choosing the correct collection technique combined with suitable
sample tubes eases these difficult conditions as much as is possible.

46 47
Drip blood collection 5.3.2 Capillary blood collection
The Micro-Needle combined For capillary blood collection, the Neonatal Safety Lancet or the Safety Incision
with the prepared Micro Tubes Lancet can be used depending on the patient and the blood volume required.
simplifies blood collection from
the cephalic vein.
Difficult handling of broken Luer
needles is no longer necessary.
Broken needles are small, cumbersome Comparison of the Safety-Lancet and the Safety Incision Lancet
and may cause haemolysis (formation of
burrs in the needle). Standard Lancet: Incision Lancet:
sVertical firing direction of sCrescent-shaped incision path
the blade sShallow penetration depth
sCylindrical puncture sMinimises formation of
sHaematoma formation haematoma

Handling the Micro-Needle

1. Remove the protective cap.

2. Remove the Micro-Needle from the protective sheath.

Safety-Lancets Mini and Neonatal are suitable for collecting small or medium to high
volumes of blood, as required.

Design Penetration depth Needle size Blood volume

3. Disinfect the puncture site. Puncture the vein and
drip the blood into a prepared Micro Tube.
Neonatal 1.2 mm Blade 1.5 mm Medium to high
If the blood flow stops, the Micro-Needle can be
safely rotated by 360° using the handle.

4. Place the Micro-Needle in a suitable disposal box. Mini 1.6 mm Needle 28 G Low

If there is a risk of bone injury, however, Incision Lancets are recommended because
these have a shallower penetration depth.

48 49
Product range – Safety Incision Lancet Microvette®
Thanks to the special puncture technique, optimal blood flow with a high blood
volume is possible even with a shallow penetration depth. The shallow penetration
depth ensures rapid healing and minimises the formation of haematomas. Depending on the requirements, Microvette®
tubes with a cylindrical or conical inner tube
shape and a volume range of 100 to 500 μl
Design Application Penetration depth Incision length are available. There is the option to collect
capillary blood using the capillary technique
Neonates 1.0 mm 2.5 mm or the collection rim.

The special cap design minimises any

Premature infants 0.85 mm 1.75 mm aerosol effects when the tube is opened.

Handling the Safety Incision Lancet

Select and disinfect a After pressing the firing Microvette® – Collection methods
1 suitable puncture site. 4 button, remove the
lancet from the heel.
To meet the specific requirements of capillary blood collection, there are two
collection techniques available:
➊ Capillary method using the end-to-end capillary
➋ Gravitational principle using the collection rim

Remove the safety Dispose of the lancet in Note: Letting blood drip into a capillary tube by means of a
2 mechanism by 5 a suitable disposal box
pressing sideways with
Luer needle does not constitute capillary blood
the thumb. collection.

5.4 The difference between capillary blood and venous blood

Taking into account the sample material is important for assessing the analytical
Lift the foot into a suitable Discard the first drop
3 position. Press the blade 6 of blood. Then fill the results. Between capillary blood and venous blood there are differences in the
opening flat against the capillary tube. concentration of various parameters. For example, the serum concentrations of total
selected and disinfected
puncture site and press the protein, bilirubin, calcium, sodium and chloride are significantly lower in capillary
trigger button. The safety blood compared to venous blood.23
incision lancet must always be
positioned and triggered parallel Glucose, lactate and CK, however, have higher levels of concentration in capillary
to the length of the foot (never blood than in venous blood.
200

across the heel)! The triangle EDTA

points to the blade exit point.

23
Kupke et al; On the composition of capillary and venous blood serum; Clin Chim Acta. 112(2):177–85; 5 May 1981

50 51
5.5 Reference ranges Analyte
Sample
SI Conventional Remarks
source
Depending on the age of the child, concentrations of analytes in different ranges Tpt/L
are normal compared to adults. For this reason, it is important to always assess the 106/μl
(1012/l)
analytical results relative to the age-appropriate reference/standard ranges56. Neonate
3.9-6.5 3.9-6.5
Some parameters are shown in the following table as examples. Week 1
Neonate Rapid breakdown after

Erythrocytes
3.6-5.8 3.6-5.8
56
Kohse et al.; National and international initiatives and approaches for the establishment of reference intervals in pediatric laboratory Week 2 birth.
medicine; J Lab Med 2015; 39(4): 197-212
Infant 3.0-5.4 3.0-5.4 Elevated (polycythaemia)
with dehydration and with/
Sample after sustained high levels.
Analyte SI Conventional Remarks Toddler Child 4.0-5.4 4.0-5.4
source
μmol/L mg/dL Adult (m) 4.5-5.9 4.5-5.9
Indirect bilirubin in
Neonate neonates may be
elevated due to increased Adult (f) 3.9-5.2 3.9-5.2
Day 1 < 68 <4 breakdown of erythrocytes.
Value > 16-18 mg/dl risk of Fraction I/I %
Bilirubin
Day 2-3 < 154 <9 kernicterus.

Haematocrit (HCT/Ht)
(total) Neonate 0.45-0.65 45-65
In neonates, direct
Day 3-5 < 239 < 13-14 photometric measurement
is possible, direct bilirubin Infant 0.30-0.55 30-55 Ht elevated with
Infant 1.7-14 0.1-0.8 cannot be detected in dehydration, lowered with
healthy children. Toddler Child 0.31-0.48 31-48 hyperhydration
Adult 1.7-22 0.1-1.3

mmol/L mg/dL Neonates can have higher Adult (m) 0.39-0.52 39-52
values on day 1.
Lactate Elevated in Adult (f) 0.35-0.47 35-47
Child/Adult 0.5-2.2 4.5-20 mitochondriopathy, tissue
hypoxia, etc. mmol/l g/dl
Neonate μmol/L mg/dL
Neonate
9.3-13.7 15-22
Day 1 37-113 0.41-1.24 Week 1

Haemoglobin (Hb)
Neonate
Week 1 14-86 0.15-0.95 Values depend on muscle 7.8-12.4 12.5-20
Week 2
mass; women have lower
Week 4 12-48 0.13-0.53 values. Infant 5.9-9.9 9.5-16
Creatinine Creatinine concentration in
Infant 22-55 0.24-0.61 the serum only increases Toddler / Child 6.8-9.9 11-16
when the glomerular
Toddler 25-64 0.28-0.70 filtration rate is < 50%.
Adult (m) 8.1-11.2 13-18
Children 23-106 0.25-1.17

Adult 74-110 0.81-1.21 Adult (f) 7.5-9.3 12-15

52 53
 Sample Age-related reference values (example reference value)
Analyte SI Conventional Remarks
source
Gpt/l (109/l) 103 Cells/μl Age aPTT [s]* Age Antithrombin [%] D-dimers [μg/L]
1-3
Neonate 100-250 100-250 Thrombocytopenia e.g. 39 (28-49) 1 day 76 (58-90) 1470 (410-2470)
Months
due to mumps 30 Gpt/L:
Platelets Toddler 220-500 220-500 4-6
increased bleeding 36 (31-44) 3 days 74 (60-89) 1340 (580-2740)
Months
Children 150-350 150-350 tendency.
7-12 1-12
35 (29-42) 109 (72-134) 220 (110-420)
Adult 150-400 150-400 Months months
Up to 4
Gpt/l Cells/μl 33 (28-41) 1-5 years 116 (101-131) 250 (90-530)
Changes in the leucocyte years
Neonate count during the first 5-9
9-35 9,000-35,000 34 (28-41) 6-10 years 114 (95-134) 260 (10-560)
Day 1 weeks of life/year. years
Neonate Increases (leucocytosis) are
Leucocytes 5-20 5,000-20,000 10-18
Weeks 1-4 usually caused by elevated 34 (29-42) 11-16 years 111 (96-126) 270 (160-390)
years
Infant/Toddler/ numbers of neutrophil
5-18 5,000-18,000 granulocytes. Adults 31 (26-36) Adults 96 (66-124) 180 (50-420)
Child
Adult (m) 4-10 4,000-10,000 * measured with Pathromtin SL
22
Barthels et al; Das Gerinnungskompendium; 2012
24
Speer et al; Pädiatrie; 2013

Due to a physiologically higher haematocrit, the quantity of plasma in neonates is

5.6 Haemostasis in paediatrics lower.
Haematocrit correction is not necessary here because the age-related reference
Some components of the coagulation system change in childhood and dramatically values were determined under these conditions and a correction therefore does not
so, particularly in the first year of life, to adapt to the change in conditions. have to be made.
Reduced thrombin formation with a simultaneous reduction in thrombin inhibition is What is important is that sufficient sample material is collected for the required
a protective mechanism in neonates. analyses in light of the low plasma yield.
As a rule, neonates have considerably lower values for most coagulation factors
than an adult. The reduced liver synthesis rate in the neonate is usually considered
responsible but an accelerated turnover is also a possibility, particularly regarding the
birth.
Many components reach adult reference values after 1 year of age. Antithrombin is
about 10% higher compared to an adult from 1 month of age and into childhood.
Values for aPTT are generally longer in childhood than in adults. Factor II and VII
remain about 10-20% lower.

Note: There are a number of special physiological characteristics

of children of which the user must be aware so that they can
be reliably differentiated from pathological changes.

54 55
6 Blood gas
6.1 Type of blood collection
Blood gas collection and blood gas analyses are carried out in many different areas
such as emergency admissions, intensive care units, outpatient clinics, operating
areas, cardiac catheterisation and pulmonary diagnostic laboratories.
Because the parameters have different concentrations depending on the blood
vessel (pCO2 is higher in venous blood, the concentration of pO2 and sO2 is lower
in venous blood than in arterial), the puncture site for the sample should be noted
and taken into account (e.g. arterial access, CVC, peripheral artery).25 Arterial blood
should always be the material of choice.
For children, arterialised capillary blood is often taken from the earlobe or fingertip or
for infants from the side of the heel.
For ventilated patients, the setting of the ventilation equipment should also be noted
and taken into account.

25
Michael D Davis RRT et al.; AARC Clinical Practice Guideline: Blood Gas Analysis and Hemoximetry: Respiratory Care; 58(10); Oct. 2013

Important: For calcium measurement using blood gas analysers

(ISE method), calcium-titrated heparin (balanced, equilibrated)
as in the blood gas capillaries and the Blood Gas Monovette®
must be used. Total calcium must therefore not be determined
using the Blood Gas Monovette®.

“It is also true for blood gas that the better the
preanalytics, the more meaningful the result”

56 57
6.2 Storage Air bubbles

Always aim to measure parameters immediately after the blood collection. If the To avoid erroneous measurements due to air contamination, air bubbles must be
measurement cannot be done within 15 minutes, the sample should be stored removed immediately after the blood collection (see venting). The longer the samples
refrigerated (about 4°C).25 are stored with air bubbles and the larger the air bubble(s), the greater the change in
the values.
25
Michael D Davis RRT et al; AARC Clinical Practice Guideline: Blood Gas Analysis and Hemoximetry: Respiratory Care; 58(10); Oct. 2013

Lowered Elevated
After storage the samples must be carefully mixed because sedimentation can lead pCO2 pH
to erroneous measurements of the Hb.
pO2
Cellular metabolism may lead to changes in the concentration over extended sO2
storage periods.

Lowered Elevated
Blood collection from a catheter
pH pCO2
Contamination by infusions or flushing solutions are possible risks. Before the blood
pO2 Calcium
collection, it must be ensured that an adequate blood volume is discarded.
Glucose Lactate

Contamination with liquid heparin Contamination with NaCl solution

Lowered pO2, Na+, Cl- Na+, Cl-

Elevated pCo2, K+, Ca++, gluc, lactate, tHb

6.3 Troubleshooting Haemolysis

Haemolytic samples have erroneously high potassium concentrations and
Clotting
erroneously low sodium and calcium concentrations.
Samples with clots cannot be correctly drawn up into the analytical equipment and
the results will not be representative.
Possible causes of haemolysis
sShearing forces: - Sample shaken too hard during mixing or sample
Solution transport
sUse liquid-dosed heparin because this mixes more quickly with the sample.26 sCollection technique: - Too much pressure is applied (milking) to the puncture
sMix the samples carefully and immediately after the samples are collected. site during collection of arterialised capillary blood
sUse the mixing aid for the blood gas capillaries. sTemperatures: - Extremly high temperatures in summer
- Extremly low temperatures, e.g. sample frozen or
26
Gruber et al; Heparin release is insufficient in syringes with platelets as heparin source; Clinica Chimica Acta, 395: 197, 2008 placed directly on ice

58 59
6.4 Collection technique – Blood Gas Monovette® Mixing the Blood Gas Monovette®
In contrast to mixing in the inverted position, which is encouraged by the air bubble in the standard S-Monovettes, the
process of mixing the Blood Gas Monovette® is as follows:
1 2 b a

Place the membrane adapter (item no.: 14.1112) on the Luer lock of the Monovette®
(a) and complete the Blood Gas Monovette® with the Safety-Needle (b) or the Safety-
Multifly® needle.

Mix the blood sample immediately after collection by rolling the Blood Gas Monovette® between the palms of the hands.
The tubes must be mixed by rolling between the palms of the hands rather than inverting.

Important: Blood gas analyses should be carried out as soon as

®

possible after blood collection, at the latest 15 minutes

after the samples are collected.

Collection technique – blood gas capillaries

For skin puncture we recommend using the safety lancets, item no. 85.1015 to 85.1019.
Remove the orange protective Remove the blood sample according to the work instructions. When puncturing the
cap from the Blood Gas artery, a 45° angle is recommended. 1. Select the puncture site and encourage blood flow.
Monovette®.
2. 2. Attach a cap loosely to the end of the capillary.

3. Insert a mixing wire into the capillary and advance until it reaches the
1. 3. attached cap.

Venting the Blood Gas Monovette® 4. Clean the puncture site with disinfectant.
Puncture the skin to produce a good blood flow.
To avoid erroneous measurements due to air contamination, after completing the blood collection the air must be Discard the first drop. Remove the attached cap.
removed from the Blood Gas Monovette® as follows: Then place the capillary horizontally and hold one end in the middle of the
blood drop and fill the capillary completely without any air bubbles.

5. Firmly close both ends of the capillary with the caps.

6. Using the magnet, move the mixing wire back and forth along the entire
5. 5.
length of the capillary 10-15 times to mix the blood with the
anticoagulant.
6.

7. Immediately before the analysis, mix the sample again.

Then position the mixing wire at the end of the capillary.
1 2 3 4
8. Remove both caps.
Place the ventilator (item no. Carefully push the plunger Remove and dispose of the Place the protective cap on
14.1148) on the Blood Gas upwards. ventilator. for the mixing procedure. 9. Allow the analysis equipment to suction up the blood sample.
Monovette®.

60 61
7 Safety when
collecting Safety – why?
blood The most important infectious agents that can be transmitted by needle stick injuries
(NSI) are hepatitis B virus, hepatitis C virus and HIV.
Using suitable protective measures, these incidents can be almost completely
avoided.27

The EU Directive 2010/32/EU28 Prevention of sharps injuries in the hospital and

healthcare sector requires the safest possible working environment for employees in
the healthcare sector.

27
The underestimated workplace accident, infection risk due to needle stick injuries; SAFETY FIRST! initiative
28
EU Directive 2010/32/EU of the Council of the European Union from 10 May 2010 Prevention of sharps injuries in the hospital and
healthcare sector

Preventive and protective measures

sIntroduction of safe working regulations
sMaintain general hygiene
sVaccinations (against hepatitis B)
sSuitable personal protective equipment
sWear gloves
sCover any cuts and grazes with waterproof plasters
sAvoid unnecessary use of sharps
sProvide medical instruments with integrated safety and protective mechanisms
sForbid the replacement of protective caps on used needles (no re-capping)

“Informing, training and providing safe working

equipment are the keys to avoiding needle stick injuries
and the associated risk of infection” Note: Over half of all needle stick injuries occur during disposal.57
57
SAFETY FIRST, Germany - www.nadelstichverletzung.de

62 63
7.1 Safety-Needle 7.2 Safety-Multifly® needle
The Safety-Needle is ready to use, thus ifly® needle
The adapter of the Safety-Multifly
sparing the step of attaching the needle in is already pre-assembled and
the needle holder and thus reducing the forms a ready-to-use unit.
potential risk of a needle stick injury at the The single-handed operation
back of the needle. of the needle protector of the
Safety-Multifly® needle offers
maximum protection.

Handling
After blood collection:

Handling Remove the last S-Monovette® from the

Safety-Multifly® needle.
1 After blood collection:

Detach the last S-Monovette® from the Safety-Needle and Hold the needle protector at its back end with your thumb
then withdraw the Safety-Needle from the vein. on top and your forefinger below and withdraw the Safety-
Multifly® needle from the vein.

2a Hold the Safety-Needle on the adapter, place the needle

protector on a stable, flat surface and lock the needle into
the needle protector by pressing gently downwards until it
makes a noticeable and audible click. Gently hold the tubing by pressing it slightly into the palm of
your hand and push the needle protector over the needle…
Click

2b Alternatively, you can also activate the needle protector with

your index finger. For reliable function, ensure that this is
done at the bottom end of the protector.
...until the needle is noticeably and audibly locked into the
Click
protective casing.
Click

3 After activating the protective mechanism:

Discard the safely locked Safety-Needle in a disposal box.

After activating the protective mechanism:

Discard the safely locked Safety-Multifly® needle into a

disposal box.

Safety activation is always done with one hand only!

64 65
7.3 Multi-Safe disposal boxes
For collecting sharps, waste containers must be provided and used that meet the Ź As a rule, when disposing of potentially infected medical single-use items,
relevant regulations TRBA 250 (Technical Rules for Biological Materials – German ensure they are disposed of in a hygienically correct manner.
regulations) and ISO 23907.

These regulations define the following features of the containers, for example:
- Shape and appearance
- Container must not rupture when dropped from a particular height in tests
- Container walls must resist penetration up to an applied pressure of 15 N

If the sharps containers are supposed to be disposed of through a medical waste

disposal service and are placed on the street, UN certification of the disposal box is
mandatory. The certified containers are identified by a multiple digit UN code that is Safety instructions
normally located on the top of the lid. Disposal boxes without this identification must
sOnly use containers of a size that is suitable for holding the items to be disposed
be disposed of inside a container with this identification.
of.
sThe lid must be on the container and locked into place before it is filled.
sConnect containers with the recommended adhesive adapter by rotating or fixing
by hanging in the wall holder to prevent accidents.
sDo not use the day lid to press down the items to be disposed of.
Safe disposal sScalpels must be disposed of in the container with particular care. If too much
force is used when throwing scalpels in or if other items are placed on top, there
is a risk of the angle changing and damaging the container walls or the base of
the container.
Recommendation: sOnly place items to be disposed of upright in the container.
Only fill the Multi-Safe container sDo not press items into the container with force.
to about 2/3 of its volume.

Do not overfill the Multi-Safe:

2/3 sDo not place any liquids in the container.
sDo not place hands or any other objects in the container (risk of injury).
sDo not throw, shake or drop the container.
Risk of injury! sBefore sealing the container, ensure that no items are projecting through the
Note the filling line opening.
Filling line noted Overfilled sBefore disposing of the container, carefully check that the lid is tightly sealed.
See marking

66 67
8 Centrifugation
8.1 Correct handling for centrifugation
Most laboratory analyses require serum or plasma, the liquid component of the
blood. This is obtained by centrifuging the sample. Inside a centrifuge a rotor with
tube holders rotates at a speed of several thousand revolutions per minute.
This rapid rotation produces a multiple of gravity (g) inside the tube holder.
This causes the liquid and solid components of the blood to separate.
What is important is to differentiate between the revolutions per minute and the
g force (gravitational force).
The g force is the value that is relevant for a good centrifugation result.
For this reason the g force is of particular importance when setting the centrifuge.
The g force can be calculated using the radius (cm) and the revolutions per minute
(RPM):

g = 11.18 × r × (min-1/1,000)2
r = radius in cm
min-1 = revolutions per minute

To convert from g force to RPM [min-1] or vice versa,

you can use the centrifugation calculator at
www.sarstedt.com/en/service-consultation/centrifugation-calculator.

The centrifuge radius r can be found in the information provided by the centrifuge
manufacturer or it can be determined using the following image:

Fixed-angle rotor Swinging bucket rotor

“Centrifugation is a physical separation process that

is based on the different density characteristics of
substances such as blood cells and plasma”

68 69
8.2 Difference between fixed-angle and swinging bucket rotors 8.3 Serum collection
*For gel-prepared S-Monovettes, we recommend using swinging bucket rotors only. S-Monovette® Serum-Gel with
The sample holder is arranged at a fixed oblique angle in a fixed-angle centrifuge. coated beads to accelerate
The sample holder in a swinging bucket rotor moves during the centrifugation from coagulation
a vertical position to a horizontal position. In this way, the force during centrifugation
acts evenly from the lid towards the base.
The result is a well-shaped, horizontal gel layer.

After blood collection, the serum samples must coagulate for 15–30 minutes.
Fixed-angle rotor Swinging bucket rotor
This means that as the coagulation proceeds, the coagulation factors (e.g. fibrin) are
consumed and the blood cells form a blood clot.

The coagulum forms in the shape in which the blood cells are present in the tube.
This means that if the S-Monovette® is placed horizontally after the blood collection,
the blood cells sediment along the horizontal tube and form a long shape.
The resultant shape can be compressed during the centrifugation. After the
centrifugation, it springs back in a concertina shape (sausage phenomenon).
The serum from such a sample cannot be automatically pipetted.
It is therefore important to store serum samples upright after blood collection.

✓ ✗
Sample that has Sample that has
clotted upright clotted horizontally
after centrifugation after centrifugation

70 71
8.4 S-Monovette® centrifugation conditions Gel ascent during centrifugation

Standard
Preparation Min. Alternative range Temperature
recommendation

S-Monovette®
10 2,000 x g 1,800 - 2,500 x g 18 - 25°C
Serum

S-Monovette®
10 2,500 x g 2,200 - 3,000 x g 18 - 25°C
Serum-Gel*

S-Monovette®
10 2,000 x g 1,800 - 2,500 x g 18 - 25°C
Li-Heparin
0 1 2 3 4 5 10

minutes
®
S-Monovette
Li-Heparin-Gel* 10 3,000 x g 2,700 - 3,300 x g 18 - 25°C
or 15 2,500 x g 2,300 - 3,000 x g
These centrifugation conditions (see p. 72) are recommendations. The values are
based on what we consider to be the worst-case conditions, e.g. an older model
centrifuge that requires considerably more time to reach the necessary g force
S-Monovette® than a new high-performance centrifuge. In isolated cases, it may be that the
10 2,500 x g 1,800 - 2,500 x g 18 - 25°C
EDTA-Gel* centrifugation conditions deviate from the standard recommendations shown in the
table while achieving the same results.
The details of the standard centrifugation conditions are always printed on the label
S-Monovette® of the inner carton as well.
10 1,800 x g 1,800 - 2,300 x g 18 - 25°C
Citrate
* For gel-prepared S-Monovettes, we recommend using swinging bucket rotors only.

S-Monovette®
10 2,000 x g 1,800 - 2,500 x g 18 - 25°C
Fluoride/GlucoEXACT

72 73
9 Haemolysis
– what is it? Characteristic feature of haemolysis
If more than 0.5% of the erythrocytes are destroyed, the serum/plasma is
discoloured.

- + ++ +++ ++++

mg/dl29 0 50 150 250 525

After centrifugation, this can be seen as a reddish colour of the plasma or serum.
The cause is leakage of haemoglobin, which gives the erythrocytes their red colour.
Above a concentration of about 20 mg haemoglobin/dl , haemolysis can be seen
“The destruction of erythrocytes due to in the serum/plasma.
The absence of a red colour does not exclude interference due to haemolysis.
damage of the cell membrane leads to leakage
of haemoglobin into the plasma/serum. A reddish
Haemolysis – the destruction of erythrocytes – is classified as in vivo haemolysis
discolouration of the serum/plasma can be seen.” (pathological) or in vitro haemolysis (physiological) based on its cause.

29
CLSI; Hemolysis, Icterus, and Lipemia/Turbidity Indices as Indicators of Interference in Clinical Laboratory Analysis; Approved Guideline;
C56-A; 32(10); 2012

74 75
9.1 In vivo haemolysis 9.2 In vitro haemolysis
Disease can cause the destruction of erythrocytes within the body. This is referred This type of haemolysis develops outside the body and is responsible for more
to as in vivo haemolysis or haemolytic anaemia. than 90% of haemolytic samples. The cause is always due to preanalytics.

Such a disease may be inherited or acquired. Common causes during blood collection
sProlonged/too tight venous stasis
sPhysical shearing forces (needle too thin, bent needle)
Inherited Acquired sTraumatic venous puncture (poking)
sBlood collection from catheters using the vacuum technique15
Mycoplasma pneumoniae infection
Cold agglutinin disease sIntravenous catheter combined with too large vacuum force31-38
Haemoglobinopathy e.g.: sickle cell
anaemia, thalassaemia
Autoimmune haemolytic anaemia (AIHA) sInfusion solutions (dilution, distortion)
Autoimmune diseases, e.g.: Lupus
erythematosus, chronic lymphatic leukaemia
(CLL)
15
Lippi et al.; Prevention of hemolysis in blood samples collected from intravenous catheters Clin Biochem 46: 561–564, 2013
31
Ong, et al. Reducing blood sample hemolysis at a tertiary hospital emergency department. Am J Medicine 2009;122:1054e1–e6.
32
Glucose-6-phosphate dehydrogenase Infections (e.g.: malaria, babesiosis, Halm, et al. Obtaining blood samples from peripheral intravenous catheters: best practice? Am J Crit Care 2009;18:474–8.
33
Wollowitz, et al. Use of butterfly needles to draw blood is independently associated with marked reduction in hemolysis compared to
deficiency Clostridium) intravenous catheter. Ac Emerg. Med 2013;20:1151–1155.
34
ENA’s Translation Into Practice. Reducing Hemolysis of Peripherally Drawn Blood Samples. December, 2012
(Emergency Nursing Association).
35
Heyer et al.; Effectiveness of practices to reduce blood sample hemolysis in EDs: A laboratory medicine best practices systematic review
Mechanical stress in the circulatory system and meta-analysis; Clin Biochem 45: 1012-1032, 2012
Defects in the erythrocyte membrane (e.g.
e.g.: Disseminated intravascular coagulation 36
Grant MS; The Effect of Blood Drawing Techniques and Equipment on the Hemolysis of ED Laboratory Blood Samples;
hereditary spherocytosis or hereditary
(DIC) Haemolytic uraemic syndrome (HUS) J Emerg Nurs 29:116-121, 2003
elliptocytosis)
Thrombotic thrombocytopenic purpura (TTP) 37
Straszewski et al J; Use of seprate venipunctures for IV access and laboratory studies decreases hemolysis rates;
Intern Emerg Med 6(4):357-359, 2011
HELLP syndrome 38
Dugan et al.; Factors Affecting Hemolysis Rates in Blood Samples Drawn from Newly Placed IV Sites in the Emergency Department;
J Emerg Nurs 31(4): 338-345, 2005

Pyruvate kinase deficiency = erythrocyte

Burns
enzymopathy

Drugs, toxins

Blood transfusion from incompatible blood

Common causes after blood collection
group
sToo vigorous mixing/shaking
sTransport influences (too much mechanical stress, e.g. pneumatic tube system)
sSample too old (the risk of haemolysis increases as the sample ages)
30
Lippi et al; In vitro and in vivo hemolysis, an unresolved dispute in laboratory medicine; 2012 sSample cooled / heated too much / frozen

76 77
9.3 Consequences of haemolysis 9.4 Clinical relevance
Release of cell contents – differences in concentration The following parameters are affected:
Substances that are present in
erythrocytes in higher concentration Iron K+
(intracellular concentration) are
released into the serum/plasma
(extracellular concentration) Slight haemolysis (* 30-60 mg/dl):
because the erythrocyte membrane LDH, potassium, AST , ALT
is destroyed during haemolysis.
The result is erroneously
higher measurements.
Moderate haemolysis (* 60-200 mg/dl):
LDH ALT Troponin*, ß-HCG, glucose, CK, PTT, aPTT,
D-dimer (*depends on the method)
AST

Release of cell contents – visual interference Severe haemolysis (* 200 mg/dl):

During haemolysis haemoglobin, which gives blood its red colour, is released into the All parameters
serum/plasma. This can lead to erroneous measurement signals during photometric
analyses due to the absorbance of haemoglobin itself.
Erroneous measurement signal = incorrect result 39
Lippi et al Hemolyzed specimens: a major challenge for emergency department and clinical laboratories,
Crit Rev Clin Lab Sci 48:143–153, 2011

Release of cell contents – method-specific interference

The individual test methods may be affected and interfered with due to the enzymes
released from the cells.
Note: The analytical results are altered by haemolysis and do not reflect
Released cell content Affects analysis the conditions in the patient. This can lead to an incorrect
diagnosis, no diagnosis or unnecessary diagnostics.
Free haemoglobin Bilirubin
In many cases, repeat blood collection to determine the correct analytical values is
Adenylyl kinase CK, CK-MB
necessary.
Hydrolase Coagulation This causes avoidable patient stress, time wasting and additional costs.31,40,41,42

Release of cell contents – shifts in volume

31
Ong, et al. Reducing blood sample hemolysis at a tertiary hospital emergency department. Am J Medicine 2009;122:1054e1–e6.
In cases of extensive or severe haemolysis, there may be an increase in the volume 40
Cadamuro et al; The economic burden of hemolysis; CCLM 2015
of the liquid fraction in the sample (because there are hardly any or no cells present 41
Jacobs et al; Cost of hemolysis; AnnClinBiochem 2012; 49: 412–413
any more). This leads to a dilution of the serum/plasma. 42
P Jacobs et al; Haemolysis Analysis; An Audit of Haemolysed Medical Admission Blood Results; AcuteMed 2010; 9(1): 46-47

78 79
10 Storage and
transport 10.1 Sample transport
To ensure correct storage, transport conditions and sample shipping, the relevant
shipping regulations43, 44 and the stability of the individual parameters must be taken
into account. This assumes optimal organisation.
Important: The sender is responsible for shipping the sample
and choosing the correct transport system.
43
P650 IATA/ADR
44
TRBA 100

Sample transport compliant with the Packaging Instruction

P650 of the ADR and IATA
Before transporting samples of liquid biological
materials in category B in connection with
transport boxes and cases, the sender should
enquire whether the samples will be shipped via a
land, rail or air transport route.
The P650 Packaging Instruction, which is also
incorporated in the ADR (European Agreement
concerning the International Carriage of
Dangerous Goods by Road) and in the IATA
(International Air Transport Association),
applies specifically for these individual routes.
These regulations state that samples must be
transported in packaging that consists of 3
components:
sPrimary receptacle (leakproof)
sSecondary packaging (leakproof)
“Sample transport and storage must be chosen sOuter packaging (rigid; with a minimum dimension of 100 × 100 mm; labelled
so that the analytical results are not affected ‘BIOLOGICAL SUBSTANCE, CATEGORY B’ with the UN code ‘UN3373’ printed in
a rhombus with a minimum dimension of 50 × 50 mm)
by transport/storage”
The primary receptacle or the secondary packaging must also be able to withstand
an internal pressure of 95 kPA without leakage. There must also be an absorbent
material placed between the primary receptacle and the secondary packaging that
can absorb the entire contents of the primary receptacle.

80 81
In-house transport / TRBA 100 10.2 Influence of temperature, time and cellular metabolism
For safe in-house transport of samples Concentrations that are measured, change due to the stability of the individual
of biological working materials and parameters and cellular metabolism. Mechanical or physical stresses placed
substances, these must be transported on the sample materials may also produce changes.
in containers that are enclosed, rigid,
non-breakable and leakproof and have
an external surface that can be disinfected
and permanently labelled. These containers
must also not be able to be inadvertently
opened by external impacts.44 Cellular metabolism
44
Blood is a living substance. This means
TRBA 100
that there are metabolic processes, that
is, cellular metabolism, occurring in the
sample tube after blood collection.

Transporting “exempt medical samples” Note: Blood is alive!

Samples that are not considered infectious substances
in category A and B are not subject to the ADR/IATA
regulations but must be packaged as follows.
3-component packaging consisting of:
Effect of storage on various parameters
sPrimary receptacle (waterproof)
sSecondary packaging (waterproof) Parameter Value
sOuter packaging (minimum dimension 100 × 100 mm Lactate Increases
with the label “EXEMPT MEDICAL SAMPLE”
or “EXEMPT VETERINARY SAMPLE”) Ammonia Increases
An absorbent material that can absorb the entire contents of the primary receptacle Potassium Increases
must also be placed between the primary receptacle and the secondary packaging.
As a rule, the P650 is the same in both regulations. Glucose Falls

pCO2 Falls
Exception: Shipping boxes and transport cases that are used to
transport samples of biological substances in category B Depending on the parameter, the changes in the values may be prevented by
must be tested in accordance with the P650 Packaging special stabilisers in the various preparations or by physical separation (gel,
Instruction. Seraplas® filter, preparing aliquots).

82 83
Influence of storage temperature on glucose and potassium Sample storage and transport

Glucose sBlood samples should be taken to the laboratory for

90 Storage analysis as soon as possible.
80 temperature sAfter centrifugation, separating gels or filters prevent
4 °C
70 diffusion of substances from the erythrocytes into the
serum/plasma.
60
Storage
mg/dL

50
temperature
40 23 °C
30
20
Storage Whole blood without serum/plasma separation
10 temperature
using gel or a filter must not be frozen under any
0 30 °C
circumstances.
0 2 4 6 8 24 48 This would result in complete haemolysis.
hours

5
Sarstedt; Tips & Techniques in Preanalytics; 2014

Potassium Clinical chemistry:

Storage sFor long-term storage, the serum should be stored at 2-4°C in closed containers.
12 temperature
sSerum or plasma samples can be stored at -20°C for extended periods.
4 °C
10 sSpecial cool transport containers should be used to protect samples
during prolonged transit.
8 Storage sFor some analyses, the sample must be transported promptly
mg/dL

temperature
6 (e.g. ammonia within 15 min.).
23 °C
4 Coagulation diagnostics:
Storage sFor coagulation diagnostics, the sample should be transported at room
2 temperature (18-25°C) as a rule.6
temperature
30 °C
0 Haematology:
0 2 4 6 8 24 48
sEDTA blood for a blood count can be stored at room temperature (18-25°C)
hours for up to 24 hours.45
5
Sarstedt; Tips & Techniques in Preanalytics; 2014
6
G. Ender et al; The importance of preanalytics for the coagulation laboratory; Hämostaseologie 2/2010; 30: 63-70
Note: There is no ideal temperature. 45
N. Tatsumi et al; Specimen Collection, Storage, and Transmission to the Laboratory for Hematological Tests; International Journal of
Correctly collected, fresh samples ensure correct results. Hematology 75; 261-268; 2002

84 85
Checklist for transport
sSeal sample (prevent evaporation) By complying with the following tips, samples can be transported using a pneumatic
sStore serum/plasma at 4-8°C tube system without significant effects on the values.50,51
sStore upright sMaximum speed 5 m/s
sStore EDTA for blood count at room temperature s“Gentle” curves and shapes
sAvoid repeated freezing & thawing sBrake gently before curves
sProtect from exposure to sunlight for light-sensitive sUse cushioning lining in pneumatic tube system carriers
parameters (e.g. bilirubin) sCushioned horizontal sending and receiving zones
sUse special preparation for stabilisation sSend serum samples only after the coagulation is complete
(e.g. S-Monovette® HCY-Z-Gel for homocysteine)

Pneumatic tube transport systems

Pneumatic tube transport systems can considerably shorten the time between
blood collection and analytical result.46 However, it is not a case of the faster the
better. Poor quality or incorrectly set transport systems can lead to haemolysis and
activation of coagulation.47,48,49
For monitoring, the LDH values, potassium value, leucocyte count, PTT and
D-dimers are compared with and without pneumatic tube transport.

46 50
Koessler et al; The preanalytical influence of two different mechanical transport systems on laboratory analysis; Clin Chem Lab Med; Koçak et al; The effects of transport by pneumatic tube system on blood cell count, erythrocyte sedimentation and coagulation tests;
49(8): 1379 1382; 2011 Biochemia Medica;23(2):206-10; 2013
47 51
Kratz et al; Effects of a pneumatic tube system on routine and novel hematology and coagulation parameters in healthy volunteers; Tiwari et al; Speed of sample transportation by a pneumatic tube system can influence the degree of hemolysis; Clin Chem Lab Med;
Arch Lab Med; 131: 293 6; 2007 50(3):471-474;2012
48
Sodi et al; Pneumatic tube system induced haemolysis: assessing sample type susceptibility to haemolysis; Ann Clin Biochem;
41:237 40; 2004
49
Steige et al; Evaluation of pneumatic-tube system for delivery of blood specimens; Clin Chem; 17:1160 4; 1971

86 87
11 Capillary blood
collection What is capillary blood?
Capillary blood is a mixture of fluids and is comprised of the blood from arterioles,
venules and capillaries as well as interstitial and intracellular fluids.

Note: This mixture of fluids cannot be used for a precise coagulation

analysis due to its composition. For this reason, capillary tubes
are not provided with a citrate preparation.

Applications of capillary blood collection

sPaediatrics
sGeriatrics
sIn adults for blood gas analyses, glucose and lactate measurements
sPoint-of-care testing

Exclusion criteria for capillary blood collection

sQuantities > 1 ml (e.g. blood culture)
sCoagulation analyses
sInflammations
sPatients in shock

11.1 Carrying out capillary blood collection

➊ Preparation
“Particularly in paediatrics and for POCT, obtaining - Materials
samples from the finger tip, heel or earlobe is of - Patient
particular importance” - Puncture site

➋ Puncture

➌ Sample collection

88 89
Materials required Advantages of warming the puncture site
sGloves sUp to 7x increase in blood flow
sSwab sRequirement for capillary blood gas analyses
sSkin disinfectant
sSemi-automatic single-use lancet (Safety-Lancet) Encouraging blood flow leads to arterialisation of the capillary blood and thus to
sSample tube (BGA capillary tube, Microvettes, bilirubin capillary tubes, etc.) acceptable comparability with the analytic values obtained from arterial blood.
sMulti-Safe Box for disposal
sPlaster, if required (not advised for small children because they are a choking
hazard) Procedure for warming the puncture site
sThe foot or hand of the patient is wrapped in a cloth warmed to 39°C to 40°C.
sFor the best result, pull a rubber glove over the top.
sLeave for 3-5 min.
Patient preparation
sFor capillary BGA in adults, the earlobe can be rubbed with a hyperaemia-
sIdentify the patient inducing ointment.
sInform the patient about why the blood is being collected and explain the
procedure
sSelect the puncture site Puncturing and sampling
sIf necessary, encourage blood flow at the puncture site by warming the area
sPull on gloves
sSkin disinfection
- Disinfectant
- Leave to air dry (until the disinfectant has completely dried)
Puncture sites
sCorrect hand movement to fix the finger or the foot
➊ Finger tip ➋ Heel ➌ Earlobe sPuncture with a Safety-Lancet

Important information
sDiscard the first drop of blood
sHold the puncture site downwards
sAvoid smearing the blood drop
sEnsure that the sample tube is held in the correct position
sAvoid applying repeated strong pressure (milking)
Causes haemolysis and contamination of the samples with tissue fluid

90 91
11.1.1 Safety-Lancet and safety incision lancet Product range – Safety-Lancet
The sterile single-use products prevent needle stick injuries because the needle and The 5 versions of the Safety-Lancets provide a range of different needle sizes and
blade are always safely enclosed within the lancet body before and after use. blades with different penetration depths for sampling from the finger, earlobe and
The secure trigger button prevents inadvertent, unintentional activation and heel.
inactivation of the system.
The Safety-Lancets and the safety incision lancets also comply with the EU Directive
2010/32/EU28, BioStoffV52 and TRBA 25053.

28
EU Directive 2010/32/EU of the Council of the European Union from 10 May 2010 Prevention of sharps injuries in the hospital and
healthcare sector
52
Biological Agents Regulations – BioStoffV; regulations on occupational health and safety at workplaces using biological working materials Design Mini Normal Extra Super Neonatal
from 15 July 2013
53
TRBA 250 Biological working materials in the healthcare sector and social welfare organisations; Edition of March 2014 amended on
21.7.2015, GMBI no. 29 Penetration
1.6 mm 1.8 mm 1.8 mm 1.6 mm 1.2 mm
depth

Needle size 28 G 21 G 18 G Blade 1.5 mm Blade 1.5 mm

Blood Medium to Medium to

Low Medium High
volume high high

Product range – Safety Incision Lancet

Thanks to the special puncture technique, optimal blood flow with a high blood
volume is possible even with a shallow penetration depth. The shallow penetration
depth ensures rapid healing and minimises the formation of haematomas.

Design Application Penetration depth Incision length

Neonates 1.0 mm 2.5 mm

Premature infants 0.85 mm 1.75 mm

92 93
Product range – Safety-Lancet 11.1.2 Microvette® – order of draw & techniques
The handle with its secure, flattened surface enables the lancet to be held in various
ways with a defined wing and notch on the serrated lancet body. Depending on the requirements,
Microvette® tubes with a cylindrical or
conical inner tube shape and a volume
range of 100 to 500 μL are available.
1. Twist the protective cap (1/4 turn). There is the option to collect capillary
1 blood using the capillary technique or
the collection rim.

The special cap design minimises any

aerosol effects when the tube is opened.

2
2. Hold the Safety-Lancet against the selected
and disinfected puncture site. The small
and transparent contact area enables
precise puncturing.
Press the trigger button.

3. Place the Safety-Lancet in a suitable Microvette® – order of draw54

3
disposal box.

EDTA

Lithium Heparin /
Lithium Heparin-Gel

4 4. Discard the first blood drop and then collect Fluoride

blood.

Serum /
Serum-Gel

54
CLSI Procedures and Devices for the Collection of Diagnostic Capillary Blood Specimens; Approved Standard – 6th edition GP42-A6
(formerly H04-A6); 28 (25) 2008

94 95
Microvette® – Collection methods B. Sampling with the collection rim
To meet the specific requirements of capillary blood collection, there are two
collection techniques available: 1 2 1. Remove the cap by turning it slightly.

➊ Capillary method using the end-to-end capillary 500

2. Attach the cap to the base of the tube.

EDTA K
➋ Gravitational principle using the collection rim

Note: Letting blood drip into a capillary tube by means of a Luer needle 500

does not constitute capillary blood collection.

EDTA K
3 3. Collect the blood dripping from the puncture
A. Capillary method using the end-to-end capillary site using the collection rim.

1 1. Hold the Microvette® in a horizontal or slightly

inclined position and collect the blood sample 5500

EDTA
with the end-to-end capillary.

K
200

EDTA

4 5 4. Remove the cap from the tube base and close

the Microvette® (“click” position).
2 2. Collection is complete when the capillary is
entirely filled with blood.

500
EDTA K

00
5. Mix the sample gently but thoroughly.
500

EDTA K
200

EDTA
500

EDTA
K
3 4 3. Hold the Microvette® upright to allow blood to
flow into the collection tube.

4. Twist to remove the cap including the capillary

200
and discard as a complete unit.
EDTA K

200
EDTA K

5 6 5. Remove the cap from the tube base and close

the tube (“click” position).
200

EDTA K

6. Mix the sample gently but thoroughly.

200
EDTA K

200
EDTA
K

96 97
11.2 Centrifugation conditions for capillary blood collection 11.3 Minivette® POCT
The Minivette® POCT is used for capillary blood
Standard Min. Alternative collection for immediate bedside diagnostics (also
Preparation Min. Temperature known as POCT).
recommendation (alternative) range

POCT (point-of-care testing) or immediate

Microvette® Serum bedside diagnostics is rapid diagnostics with no
2.000-
Microvette® CB 300 Serum 5 10,000 × g 10 20°C
10,000 × g preparation of reagents and/or analysis material.
Multivette® Serum

The Minivette® POCT is available in different versions with a range of different

volumes and preparations for collecting capillary whole blood, saliva or urine.
Microvette® Serum-Gel* 4,000-
5 10,000 × g 10 20°C
Multivette® Serum-Gel* 10,000 × g

Microvette® Heparin
2.000-
Microvette® CB 300 Heparin 5 2,000 × g 10 20°C
Multivette® Heparin
10,000 × g Handling the Minivette® POCT
The Minivette® POCT is used for collecting and directly dispensing samples with
a small volume. The drip-free handling enables easy sample collection and direct
Microvette® Heparin-Gel* 4,000- dispensing with no-drip transfer to the test card or sample tubes.
5 10,000 × g 10 20°C
Multivette® Heparin-Gel* 10,000 × g
1 1. The Minivette® POCT is held on the sides
below the wings in a horizontal or slightly
angled position. When collecting blood drops
Microvette® Fluoride with the capillary tip, the ventilation hole at the
2.000-
Microvette® CB 300 Fluoride 5 2,000 × g 10 20°C piston end should not be covered. Do not
10,000 × g
Multivette® push the piston down - fill the capillary
ensuring there are no air bubbles.

2 2. The blood collection is automatically finished

These centrifugation conditions are recommendations. The values are based on when the capillary is filled with blood to the
what we consider to be the worst-case conditions, e.g. an older model centrifuge white blocking filter.
that requires considerably more time to reach the necessary g force than a new
high-performance centrifuge. In isolated cases, it may be that the centrifugation
conditions deviate from the standard recommendations shown in the table while
achieving the same results. 3a 3b 3a. Place the capillary tip on the test field and
dispense the complete blood sample by
The details of the standard centrifugation conditions are always printed on the label
gently pressing on the piston.
of the inner carton as well.
3b. Alternatively, the sample can be dispensed
into a micro tube.
* For gel-prepared tubes, we recommend using swinging bucket rotors.

98 99
12 Urine sample
collection 12.1 Sample collection
Any type of urine sample requires a hygiene procedure that complies with the
following rules:
sThe patient should have the correct procedure for collecting urine samples
explained.
sBefore collecting the sample, the patient should thoroughly wash their hands
and genital area and then remove any traces of soap.
sTo avoid contamination, the sample should be collected from mid-stream urine
where possible.
sThe urine should be collected in the single-use collection container/bottle55
provided.
sThe containers must be clean and dry and for bacteriological testing they
should also be sterile.
sThe containers must be labelled carefully with a waterproof pen to prevent
mix-ups.
sAvoid collecting urine during or shortly after menstruation (this results in
contamination of the urine with blood).

55
CLSI Urinalysis; Approved Guideline – 3rd edition GP16-A3; 29(4) 2009

12.2 Storage and transport

Urine samples should not be exposed to direct sunlight or heat.

The analysis should be carried out within two hours of collection. If this is not
possible, the urine should be stored at a temperature of +4°C to +8°C.

Extended storage may cause the following changes, e.g.

sDisintegration of leucocytes and erythrocytes
“Hippocrates analysed the odour and colour of urine as
sBacterial growth
long ago as 400 BC and urinalysis still plays a key role
sBacterial decomposition of glucose
in the diagnostic examination”
Before the analysis, samples should be brought to room temperature and thoroughly
mixed just before applying to a test strip.

Depending on the parameter, appropriate stabilisers should be used for the storage.

100 101
12.3 Types of analyses Clinical chemistry tests

Urine can be analysed in a wide range of ways. Clinical chemistry tests provide semi-quantitative and quantitative results for greater
specificity for screening tests (e.g. during pregnancy) or when preparing diagnoses
Here are some of the most common methods:
for heart, liver or kidney diseases or cancer.
Test strips
The following parameters can be analysed using clinical chemistry analytics:
Depending on the number of test fields, the test strips enable a range
of different values to be tested such as specific gravity, haemoglobin, Electrolytes, creatinine, albumin, Į2-macroglobulin, Į1-microglobulin, Bence-
glucose, pH, protein, leucocytes, etc. Information obtained by Jones proteins, glucose, 5-hydroxyindoleacetic acid, immunoglobulins, proteins,
comparing the colour change of the test field is only an initial indicator catecholamines, porphyrins, vanillylmandelic acid (VMA)
and should be specified using additional tests.
What is important is that the test strip is completely and thoroughly
wetted and then appropriately dried before reading the result.
The correct incubation times must be complied with and the relevant Microbiological tests
information about these times can be found in the manufacturer’s
With a suspected urinary tract infection after a positive test strip
p
instructions.
result and abnormal urinary sediment, it is essential to carry out
microbial identification (microbial differentiation, bacterial count
and subsequent monitoring of the antibiotic therapy).
Urine sediment testing This provides information about the type and quantity of
pathogen (usually bacteria, possibly fungi).
Urine sediment is a preparation of the urine to assess the solid components off
the urine using microscopy or flow cytometry. These assessments can provide
information about kidney or urinary tract diseases. IMPORTANT: The samples should be collected before
To prepare the urine sediment, a defined fraction (e.g. 10 ml) of a urine sample is starting any antibiotic therapy.
centrifuged (5 min at 400 × g) and the supernatant is decanted so that about 0.5 ml For subsequent therapeutic monitoring,
of urine remains; the sediment is mixed with the residual urine and then analysed provide the laboratory with details of any
microscopically. antibiotic therapy.

The following parameters can be assessed using microscopy, for example:

sCells such as erythrocytes, leucocytes, epithelial cells, etc. Drug detection
sUrinary casts such as hyaline tests, granular casts, cellular tests, etc.
Drug detection is a sensitive examination due to the consequences off a positive
i i test
sOther elements such as yeast cells, bacteria, urine crystals
result.
Urine is often used as a sample material because it is easily collected and drugs
and their metabolites can be easily detected for long periods after use (compared to
blood or saliva). However, urine can also be easily manipulated.
Drug users often try to generate negative results.
This can be caused by excessive drinking, applying third-party urine, addition of acid
or mixing in urine-coloured liquids (e.g. apple juice, energy drinks, etc.).

102 103
12.4 Types of urine samples Mid-stream urine collection is divided into:

Urine samples are differentiated by the time and type of collection.

First morning urine
The components in the first urine passed in the morning are more concentrated.
Mid-stream urine
Collecting a urine sample using mid-stream urine is recommended in principle to sApplication:
obtain the purest possible sample Suitable for bacterial tests, test strips, sediment, clinical chemistry tests, protein
diagnostics.
sAdvantage:
Correct sample collection:
Due to the long retention time in the bladder, the morning urine is ideally suited to
1 1. Correct cleaning and drying of the hands and nitrite and protein measurement.
external genital area.

Second morning urine

The second morning urine can possibly provide the mean values for individual
parameters and can be used in isolated cases as a substitute for 24-h urine
collection.
2 2. Release the first urine in the toilet (a) and then
collect the mid-stream urine with the urine container sApplication:
(b). The remaining urine is also disposed of in the Test strips, glucose, protein
toilet (c).
sDrawback:
Avoid contamination.
Not suitable for the nitrite test
a c
100
00 ml 75/40

90
80
70
60
50
40
30
20
b
10

Spontaneous urine
3 3. Securely close the container with the lid.
The urine can be collected at any time. Spontaneous collection is useful in cases of
suspected urinary tract infection or intoxication.
Note:
s 0ARTICULARLYIMPORTANTFORMICROBIALTESTS sApplication:
s 2EQUIREMENT#OOPERATIVEPATIENT Is completely adequate for many chemical and microscopic parameters
sAdvantage:
Easily collected
sDrawback:
Dilution errors – for correct assessment always take the specific gravity (density)
into account

104 105
Suprapubic aspiration of urine 24 Hour urine collection
The bladder is punctured suprapubically while Splittable trocar The entire urine produced is collected over a period of
ensuring strict aseptic technique. The invasive 24 hours. Collection over this period compensates for
Urinary
nature of this type of urine collection means that catheter any variations in concentration of parameters during
although this method has the smallest risk of the day.
contaminating samples, it is rarely used. Typical applications for 24 hour urine collection include
However, in paediatrics the advantages of this measuring catecholamines or creatinine clearance.
method can outweigh the drawbacks of classic When measuring catecholamines and other unstable
collection (particularly for bacterial tests). parameters, adding a stabiliser (e.g. 20% HCl) to the
Pubic bone
Urethra urine is necessary.
Prostate There are ready-to-use products such as the UriSet 24
Bladder
available for this purpose.
Catheter urine
For sample collection from catheters, single-use catheters and indwelling urinary
catheters are differentiated. Collected urine volume
Because the patient is usually responsible for collecting the urine, it is essential to
provide the patient with clear instructions for correct handling.
The volume of the bottle is of particular importance here. Studies have shown that
Intermittent catheter urine collection bottles with a volume of 2,000 ml were only adequate for 60% of all
volunteers.
Collecting urine using intermittent catheterisation
is very rarely carried out because it is painful for Volume
the patient and the risk of infection is high. in litre Volumes of the 116 24 hour urine collections

3 litres
91,4 %
Indwelling catheter urine
For patients with an indwelling urinary catheter,
this type of urine sample collection is the easiest
and most hygienic method. The urine should be
Number of donors
collected from a special adapter on the inlet tube
and not from the collection bag, however. That is, in these cases a second bottle must be used and a tube must be filled from
each bottle. The particular quantity of urine in the collection bottle must then be
noted on both tubes. The urine from the two tubes is then mixed in the laboratory in
the correct ratio.
Note: For diagnostic purposes, urine should To circumvent this potentially error-prone process, a collection bottle with a volume
not be collected from the urine bag. of 3,000 ml should be used.

106 107
12.5 Handling urine sample collection systems Urine-Monovette®
The Urine-Monovette® is suitable for sample collection, transport, as a container for
Collection procedure for 24 hour urine immersing the test strip and for centrifugation.
START
1 2 3
Time 5:00
6:00
7:00 1. Discard the first morning urine

10/06
8:00 

9:00
Note the time, e.g. 7:00 am

Urine


Bacterio
logy
10:00

Z

S
TS M

11:00 2. Collect the second morning 


TS
S
M

Mo
TS 

urine and add stabiliser if

SA

Urine Z
Bacteriology
12:00 

Urine Z
Bacteriology


13:00 necessary 


14:00 Abfall
3. Collect 

15:00
16:00 all
17:00 urine
18:00 and
19:00 mix
20:00
21:00
22:00
23:00
24:00
Insert the suction tip into Hold the Urine-Monovette® Withdraw the tip,
1:00 the cup and and draw with the suction tip upwards break off the plunger,
2:00
.
up the Urine-Monovette® and withdraw the plunger in attach the cap.
3:00 . piston to the base line. downward direction until the
4:00 .
suction tip is empty.
5:00
6:00
7:00 4. Collect the first morning urine
8:00
on the next day at the same Urine-Monovette® with boric acid
9:00
10:00
time as the day before,
e.g. 7:00 am
In a filling volume of 10 ml, the boric acid
END concentration is 1.5%. Microorganisms are
(24 hours) stabilised for up to 48 hours when stored at room
temperature.

Important:
sAdhere to the stated volume
sThoroughly mix after urine aspiration
IMPORTANT: During the collection period, about 1.5-2 litres should be sNot suitable for clinical chemistry tests,
drunk throughout the day. strip tests, etc.
Thoroughly wash hands and the genital area before each
collection step and rinse away any traces of soap.

108 109
V-Monovette® Urine
By using a closed system, hygiene and comfort is significantly improved both for the C
C: Grasp the safety label on the flap and remove from the
patient and for the user. lid of the collection bottle.
Please do not touch the collection area in the lid
A: Immerse the transfer device into the urine sample. Risk of injury!
A

The collection bottle is placed with the recessed grip

facing upwards on a flat surface.
Insert the tube into the collection area and press firmly.
1200 ml

Insert the V-Monovette® into the transfer device and

press firmly until the needle penetrates the cap.
For small collection volumes between 700 and
700 ml 1200 ml, the V-Monovette® Urine can also be filled
A B upside down.
For collection volumes < 700 ml, the collection bottle
1200 ml
must be opened.
The collected urine is then transferred to a container.
B
B: Remove the safety label from the lid using the flap.
Please do not touch the collection area in the lid
Risk of injury!

First insert the V-Monovette® Urine with the cap in the

collection area and press firmly.
The tube fills with urine by itself. Only remove the tube
when the flow stops.

Mix the V-Monovette® Urine with preparation, e.g.

boric acid.
/Exp.

110 111
13 List of references

1. Guder et al.; Proben zwischen Patient und Labor; 2009 31. Ong, et al. Reducing blood sample hemolysis at a tertiary hospital emergency department.
2. Bonini et al.; Errors in Laboratory Medicine; Clin Chem 48:5; 691-698 (2002) Am J Medicine 2009;122:1054e1-e6.
3. Foubister, Vida. Cap Today Bench press: The Technologist/technician shortfall is putting the 32. Halm, et al. Obtaining blood samples from peripheral intravenous catheters: best practice?
squeeze on laboratories nationwide September 2000; Datta, P. Resolving Discordant Samples. Am J Crit Care 2009;18:474-8.
Advance for the Administrators of Laboratories; July 2005: p.60. 33. Wollowitz, et al. Use of butterfly needles to draw blood is independently associated with marked
4. Seelig et al.; Präanalytik; 2008 reduction in hemolysis compared to intravenous catheter. Ac Emerg. Med 2013;20:1151-1155.
5. Sarstedt; Tips and Techniques in Preanalytics; 2014 34. ENA’s Translation Into Practice. Reducing Hemolysis of Peripherally Drawn Blood Samples.
December, 2012 (Emergency Nursing Association).
6. G. Ender et al.; The importance of preanalytics for the coagulation laboratory; Hämostaseologie 2/2010; 30: 63-70
35. Heyer et al.; Effectiveness of practices to reduce blood sample hemolysis in EDs: A laboratory
7. RiLiBÄK § 6.1.7 Part A5 medicine best practices systematic review and meta-analysis; Clin Biochem 45: 1012-1032, 2012
8. RA Sulaiman, Effect of order of draw samples during phlebotomy on routine biochemistry results; 36. Grant MS; The Effect of Blood Drawing Techniques and Equipment on the Hemolysis of ED
J Clin Pathol. 2011 Nov;64(11):1019-20 Laboratory Blood Samples; J Emerg Nurs 29:116-121, 2003
9. RR Calam et al.; Recommended “Order of Draw” for Collecting Blood Specimens into 37. Straszewski et al J; Use of separate venipunctures for IV access and laboratory studies decreases
Additive-Containing Tubes; Clin. Chem.; Vol. 28, No. 6, 1982 hemolysis rates; Intern Emerg Med 6(4):357–359, 2011
10. Gurr et al.; Musterstandardarbeitsanweisung Präanalytik; J Lab Med 2011 38. Dugan et al.; Factors Affecting Hemolysis Rates in Blood Samples Drawn from Newly Placed IV
11. CLSI Procedures for the Collection of Diagnostic Blood Specimens by Venipuncture, Approved Sites in the Emergency Department; J Emerg Nurs 31(4): 338-345, 2005
Standard, 6th edition GP 41-A6 (former H3-A6), 27 (26) 2012 39. Lippi et al Hemolyzed specimens: a major challenge for emergency department and clinical laboratories, Crit Rev
12. Lichtinghagen et al.: Einfluss der Stauzeit auf normalisierte Laborwerte; J Lab Med 2013; 37(3): 131-137 Clin Lab Sci 48:143–153, 2011
13. M. Spannagl et al.; Hämostaseologische Globaltests; Hämostaseologi 1/2006 40. Cadamuro et al.; The economic burden of hemolysis; CCLM 2015
14. Margo A et al.; Obtaining blood samples from peripheral intravenous catheters: best practice; AJCC, 9.2009, 18 (5) 41. Jacobs et al.; Cost of hemolysis; AnnClinBiochem 2012; 49: 412-413
15. Lippi et al.; Prevention of hemolysis in blood samples collected from intravenous catheters; 42. P Jacobs et al.; Haemolysis Analysis; An Audit of Haemolysed Medical Admission Blood Results;
Clin Biochem 46: 561-564, 2013 AcuteMed 2010; 9(1): 46-47
16. Heyer et al.; Effectiveness of practices to reduce blood sample hemolysis in EDs: A laboratory 43. P650 IATA/ADR
medicine best practices systematic review and meta-analysis Clin Biochem 45: 1012-1032, 2012 44. TRBA 100
17. Grant MS; The Effect of Blood Drawing Techniques and Equipment on the Hemolysis of ED 45. N. Tatsumi et al.; Specimen Collection, Storage, and Transmission to the Laboratory for
Laboratory Blood Samples; J Emerg Nurs 29:116-121, 2003 Hematological Tests; International Journal of Hematology 75; 261-268; 2002
18. Benso S; Can a blood sample for diagnostic exams be drawn from a peripheral venous catheter?; 46. Koessler et al.; The preanalytical influence of two different mechanical transport systems on laboratory analysis;
Assist Inferm Ric; 34(2):86-92; Apr-Jun 2015 Clin Chem Lab Med; 49(8): 1379-1382; 2011
19. Pschyrembel 47. Kratz et al.; Effects of a pneumatic tube system on routine and novel hematology and coagulation
20. J. P. Borde et al.; Abnahme von Blutkulturen; Dtsch Med Wochenschr; 135:355-358; 2010 parameters in healthy volunteers; Arch Lab Med; 131: 293-6; 2007
21. Simon et al.; Blutkulturdiagnostik – Standards und aktuelle Entwicklungen; J Lab Med; 36(4):199-207; 2012 48. Sodi et al.; Pneumatic tube system induced haemolysis: assessing sample type susceptibility to
22. Barthels et al.; Das Gerinnungskompendium; 2012 haemolysis; Ann Clin Biochem; 41:237-40; 2004
23. Kupke et al.; On the composition of capillary and venous blood serum; 49. Steige et al.; Evaluation of pneumatic-tube system for delivery of blood specimens; Clin Chem; 17:1160-4; 1971
Clin Chim Acta. 112(2):177-85; 5 May 1981 50. Koçak et al.; The effects of transport by pneumatic tube system on blood cell count, erythrocyte
24. Speer et al.; Pädiatrie; 2013 sedimentation and coagulation tests; Biochemia Medica;23(2):206-10; 2013
25. Michael D Davis RRT et al.; AARC Clinical Practice Guideline: Blood Gas Analysis and 51. Tiwari et al.; Speed of sample transportation by a pneumatic tube system can influence the degree
Hemoximetry: Respiratory Care; 58(10); Oct. 2013 of hemolysis; Clin Chem Lab Med; 50(3):471-474;2012
26. Gruber et al.; Heparin release is insufficient in syringes with platelets as heparin source; 52. Biostoffverordnung – BioStoffV; Verordnung über Sicherheit und Gesundheitsschutz bei Tätigkeiten
Clinica Chimica Acta, 395: 197, 2008 mit Biologischen Arbeitsstoffen vom 15. Juli 2013
27. Der unterschätzte Arbeitsunfall, Infektionsrisiko durch Nadelstichverletzungen; 53. TRBA 250 Biologische Arbeitstoffe im Gesundheitswesen und in der Wohlfahrtspflege; Ausgabe
Initiative SAFETY FIRST! März 2014 mit Änderung vom 21.7.2015, GMBI Nr. 29
28. EU-Richtlinie 2010/32/EU des Rates der Europäischen Union vom 10. Mai 2010 Zur Vermeidung 54. CLSI Procedures and Devices for the Collection of Diagnostic Capillary Blood Specimens;
von Verletzungen durch scharfe/spitze Instrumente im Krankenhaus- und Gesundheitssektor Approved Standard – 6th edition GP42-A6 (ehemals H04-A6); 28 (25) 2008
29. CLSI; Hemolysis, Icterus, and Lipemia/Turbidity Indices as Indicators of Interference in Clinical 55. CLSI Urinalysis; Approved Guideline– 3th edition GP16-A3; 29 (4) 2009
Laboratory Analysis; Approves Guideline; C56-A; 32(10)2012 56. Kohse et al.; National and international initiatives and approaches for the establishment of reference
30. Lippi et al.; In vitro and in vivo hemolysis, an unresolved dispute in laboratory medicine; 2012 intervals in pediatric laboratory medicine; J Lab Med 2015; 39(4): 197-212
57. SAFETY FIRST, Germany - www.nadelstichverletzung.de

112 113
14 Index Blood collection, capillary, preparation 89-91
Blood collection, capillary, procedure 61, 89-91, 96-97, 99
Blood collection, venous 20-43, 47-48
24-h urine collection 107
Blood collection, venous, collection technique 20, 37, 46, 60
5-Hydroxyindoleacetic acid (5-HIAA) 103
Blood collection, venous, ending 34
_1-microglobulin 103
Blood collection, venous, for blood culture diagnostics 26, 40-43
_2-macroglobulin 103
Blood collection, venous, from a catheter 38-39, 59, 77
ACE (angiotensin-converting enzyme) 15
Blood collection, venous, preparation 9, 21
Acetylsalicylic acid (ASA) 16
Blood collection, venous, procedure 28-43
Adrenaline 14, 15, 16
Blood collection, venous, with butterfly needle 27, 32, 42, 43, 47, 60, 65
Adrenaline 17
Blood collection, venous, with Safety-Needle 26, 29, 32, 33, 34, 36, 60, 64
Age 13, 52, 54, 55
Blood culture adapter 42-43
Albumin 16, 17, 31, 103
Blood culture diagnostics 40-43
Alcohol 15, 29
Blood gas 56-61, 89, 91
Alcohol abstention 29
Blood gas analysis, clotting 58
Aldosterone 17
Blood gas analysis, collection technique 60, 61
Alkaline phosphatase (AP) 12, 13, 14, 16
Blood gas analysis, haemolysis 59
ALT, alanine transaminase (GPT) 14, 15, 16, 17, 31
Blood gas analysis, storage 58
Ammonia, NH3+ 83, 85
Blood gas analysis, ventilation 59, 60
Amylase 12, 14
Blood sedimentation (BSR = blood sedimentation rate) 12, 25
Antithrombin (AT III) 55
Blood-collecting person 21
aPTT (activated partial thromboplastin time) 19, 54, 55, 79, 86
Body position 17
Arterial access 57
BSR (blood sedimentation, blood sedimentation rate) 12, 25
Arterial blood 57
Cadmium 15
ASA (acetylsalicylic acid) 16
Caffeine 16
Aspiration technique 33-37, 39, 47 ++
Calcium (Ca ) 16, 17, 26, 27, 31, 51, 57, 58, 59
AST, aspartate aminotransaminase (GOT) 15, 16, 17, 19, 31, 78, 79
Cannabis 14
AT III (antithrombin, antithrombin III) 55
Carryover of additives / preparation 19, 26
`-carotenoids 15
Casts (urinary) 102
`-HCG (chorionic gonadotropin) 79
Catecholamines 103, 107
Bacteria 19, 102, 103
Catheter urine 106
Bacterial count 103
CEA (carcinoembryonic antigen) 15
Bence-Jones proteins 103
Cellular metabolism: Temperature, time 58, 83
Bilirubin 13, 14, 16, 17, 19, 31, 51, 52, 78, 86, 90
Centrifugation 7, 21, 68-73, 75, 85, 98, 109
Biological rhythm 13
Centrifugation conditions, capillary 98
Blood clot 8, 58
Centrifugation conditions, venous 72, 73
Blood collection technique, capillary 61, 96-97
Chloride (Cl-) 14, 51, 59
Blood collection technique, venous 20, 37, 46, 60
Cholesterol (Chol) 12, 13, 14, 15, 17, 19, 31
Blood collection, arterial, collection technique 60
Chorionic gonadotropin (`-HCG) 79
Blood collection, capillary 49-51, 57, 58, 59, 61, 88-99
Circadian rhythm 14
Blood collection, capillary, collection technique 61, 96-97

114 115
CK (creatine kinase) 12, 16, 31, 51, 78, 79 a-Glutamyltransferase (a-GT, GGT) 15, 16, 17, 31, 32
CK-MB 78 14, 16, 17, 25, 31, 51, 58, 59, 79, 83, 84, 89,
Glucose
Cl- (chloride) 14, 51, 59 101, 102, 103, 105
Coagulation analyses 25, 27 Glucose-6-phosphate dehydrogenase deficiency
76
(G-6-PDH deficiency)
Coagulation diagnostics 85
GOT, aspartate aminotransaminase, see AST 15, 16, 17, 19, 31, 78, 79
Collected urine volume 107
GPT, alanine transaminase, see ALT 14, 15, 16, 17, 31
Collection rim 51, 95, 97
Granulocytes 15, 54
Collection techniques, capillary 61, 96-97
Haematocrit (HCT, Ht) 13, 15, 17, 19, 25, 53, 55
Collection techniques, venous 20, 37, 46, 60
Haematology 25, 85
Colour code 23
Haemoglobin (Hb) 13, 25, 53, 58, 59, 74, 75, 78, 102
Communication 9, 21
Haemoglobinopathy 76
Copper 15
Haemolysis 8, 18, 19, 32, 38, 39, 48, 59, 74-79, 85, 86, 91
Cortisol 14, 15, 16
Haemolysis risk factors 77
Creatine kinase (CK) 12, 16, 31, 51, 78, 79
Haemolysis, in vitro 77
Creatinine 12, 14, 16, 17, 19, 31, 52, 103, 107
Haemolysis, in vivo 76
Crystals (urinary) 102
Haemostasis, paediatrics 54-55
CVC 19, 40, 57
HDL-Cholesterol 13, 15, 17
D-dimers 55, 79, 86
Heroin 14
Dead volume 27
Hyperbilirubinaemia = jaundice 19
Decisions, clinical 8
Hyperlipoproteinaemia = lipid metabolism 19
Diet 11, 17
Identification of the ordering doctor 22
Disposal box 48, 50, 64, 65, 66-67
Identification of the person collecting the blood 22
Diuretics 16
Identification of the sample 23
Drip technique 47
Immunoglobulins 103
Drug detection 103
In vitro haemolysis 77
Drug use 14
In vivo haemolysis 76
End-to-end capillary 51, 96
In-house transport 82
Endogenous interference factors 19
Indwelling catheter urine 106
Epithelial cells 102
Infection risk 62, 106
Error, preanalytical 7, 8, 18, 113
Influence of sample storage 58, 83, 84, 85, 101
Erythrocytes 17, 19, 25, 52, 53, 74, 75, 76, 78, 85, 101, 102
Influencing factors 10
Exempt medical sample 82
Influencing factors, modifiable 14-17
Exogenous interfering factors 19
Influencing factors, non-modifiable 12-14
Fasting 1, 18, 21, 29
Infusion 19, 38, 59, 77
Fe (Iron) 12, 31, 78
Inorg. phosphate 16
Fibrinogen 15, 25
Insulin 14, 16
First morning urine 105
Interference factors 18-19
Fixed-angle rotor 69, 70
Intermittent catheter urine 106
Folic acid 15
Iron (Fe) 12, 31, 78
Gender 12, 13
Jaundice 18, 19

116 117
Labelling 24 Phenobarbital 16
Lactate 25, 51, 52, 58, 59, 83, 89 Phosphorus 17
Lactate dehydrogenase (LDH) 19, 78, 79, 86 Physical activity 16
Laxatives 16 PLAP (placental AP) 15
LDH (lactate dehydrogenase) 19, 78, 79, 86 Plasma 13, 16, 25, 29, 55, 68, 69, 74, 75, 78, 85, 86
LDL cholesterol 13, 15 Platelets 54
Leucocytes 12, 15, 25, 54, 86, 101, 102 Pneumatic tube system for sample transport 77, 86-87
Lipaemia 18, 19 pO2 57, 58, 59
Lipase 14 POCT 88, 99
Lymphocytes 15 Porphyrins 103
++
Magnesium (Mg ) 16, 32 14, 16, 17, 19, 26, 29, 31, 32, 59, 78, 79, 83,
Potassium (K+)
MCHC (mean corpuscular haemoglobin concentration) 15 84, 86
MCV (mean corpuscular volume = mean red cell Preanalytical errors 7, 8, 18, 113
15
volume) Pregnancy 12, 45, 103
Medical history 11, 14 Preparation 19, 25, 27, 72, 83, 86, 89, 98, 99
Medications (see also Medicinal drugs) 16, 19, 21, 29, 38 Prolactin 14, 15
Medicinal drugs (see also Medications) 16, 19, 21, 29, 38 PSA (prostate-specific antigen) 19
Mg++ (Magnesium) 16, 32 PTT (thrombin time = TT) 19, 25, 79
Microbial differentiation 103 Puncture sites, capillary blood collection 90
Microbiological tests in urine 103 Puncture sites, venous blood collection 30
Mid-stream urine 101, 104-105 Pyridoxal phosphate 15
Modifiable influencing factors 14-17 Pyruvate kinase 16, 76
Monocytes 15 Quick (thromboplastin time = TPT, prothrombin time) 16, 25
Morphine 14 Race 12
Na+ (sodium) 14, 16, 19, 31, 51, 59 Reference ranges, paediatrics 52-55
Needle stick injury 62, 63, 64, 92, Release of cell contents 78
Neonatology 45 Renin 14, 17
Nicotine 15 Rhythmic daily fluctuation 14
Nitrite 105 RPM 69
Non-modifiable influencing factors 12-14 RPM and g force 69, 72, 98
Noradrenaline 14, 15, 16 26, 27, 29, 32, 33, 34, 36, 42, 47, 49, 50, 60,
Safety products
Order of draw (blood), capillary 95 61, 62-67
Order of draw (blood), venous 26 Sample identification 23, 24
P650 81, 82 Sample storage 21, 58, 80-87
Packaging instructions for sample transport 81, 82 Sample transport 81-87
Paediatrics 44-55, 88-99 Samples for clinical chemistry 25, 85
Patient identification 21, 22, 40 Second morning urine 105
pCO2 57, 58, 59, 83 Selenium 15
Penicillin 16 Sepsis 40
pH 58, 59, 102 51, 52, 69, 71, 72, 74, 75, 78, 85, 86, 87, 95,
Serum
98

118 119
sO2 57, 59 15 Imprint
Sodium (Na+) 14, 16, 19, 31, 51, 59
Specific weight 102
Spontaneous urine 105
Stasis time 30, 31 Legal notice:
Storage 58, 59, 80-87, 101
We would like to point out that the topics addressed in ‘Tips and Techniques in
Substance use 15, 16
Preanalytics’ covering the fields of venous blood collection, capillary blood
Suprapubic aspiration urine 106
collection and urine collection are recommendations only and do not, under any
Swinging bucket rotor 69, 70, 73, 98
circumstances, replace medical, scientific or technical advice.
Test strip test 101, 102, 103, 105, 109
TG (triglycerides) 12, 15, 17, 31
Thrombin 54 Subject to technical modifications.
Thrombin time (PTT, TT) 19, 25
Thromboplastin time = TPT (Quick) 16, 25 This publication may contain information about products that may not be available in
Thromboplastin time, activated partial (aPTT) 19, 54, 55, 79, 86 all countries.
Thyroxine 14
Tips for difficult vein conditions 32, 47
Total protein 12, 17, 31, 51, 102, 103, 105
Tourniquet application 30-31
TRBA 100 81, 82
TRBA 250 66, 92
Triglycerides (TG) 12, 15, 17, 31
Troponin 79
TSH (thyrotropin) 14
TT (thrombin time, PTT) 19, 25, 79
Underfilling 8, 27
Urea 14, 16, 17
Uric acid 14, 16, 17, 19
Urinary tract infection 103, 105
Urine sample 100-110
Urine sediment (see Urinary sediment) 102, 103
Vacuum technique 36, 37, 39, 77
Vanillylmandelic acid (VMA) 14, 15, 103
Venous puncture 29, 30, 47, 48, 77
Vitamin B12 12 © 2015 · SARSTEDT AG & Co.
Postfach 12 20 · D-51582 Nümbrecht
Vitamin B6 15
Telefon +49 22 93 305 0 · Telefax +49 22 93 305-3450
Vitamin D 13 [email protected] · www.sarstedt.com
VMA (vanillylmandelic acid) 14, 15, 103
Yeast cells 102

120 121
Notes

122 123
 If you have any questions,
we’ll be happy to help!

SARSTEDT Ltd.
68 Boston Road
Leicester LE4 1AW
Tel.: 0116 235 9023
Fax: 0116 236 6099
[email protected]
www.sarstedt.com

124