Scribd
Upload
983 views7 pages

Work Instruction For Surface Finishing Lab (Paint Shop)

The document provides safety and environmental instructions for workers in a surface finishing laboratory. It lists the following personal protective equipment (PPE) that must always be worn: cotton gloves, safety shoes, hand gloves, masks, helmet, and spectacles. It also instructs workers to switch off lights and AC units after shifts and during breaks, seek first aid for injuries, and only allow authorized persons to handle chemicals.

Uploaded by

DINESHCHOUDHARY88
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
983 views7 pages

Work Instruction For Surface Finishing Lab (Paint Shop)

The document provides safety and environmental instructions for workers in a surface finishing laboratory. It lists the following personal protective equipment (PPE) that must always be worn: cotton gloves, safety shoes, hand gloves, masks, helmet, and spectacles. It also instructs workers to switch off lights and AC units after shifts and during breaks, seek first aid for injuries, and only allow authorized persons to handle chemicals.

Uploaded by

DINESHCHOUDHARY88
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 7

DOC. NO.

: WI/PROD/81
WORK INSTRUCTION FOR SAFETY AND
KCSL REV NO/DATE 00
ENVIRONMENT
ISSUE DATE: 05.08.2019

Section: - Surface Finishing Laboratory

FOLLOWING ARE THE SAFETY AND ENVIRONMENT INSTRUCTIONS TO BE TAKEN WHILE WORKING
IN SURFACE FINISHING LABORATORY.

1 Always wear the cotton gloves while working in the Laboratory.

2 Always Wear safety equipement during the Work

PPE (PERSONAL PROTECTIVE EQUIPEMENT)

SR.NO LOCATION PPE NAME PPE PHOTO

1 SAFETY SHOES

2 HANDGOLVES

3 PRODUCTION MASKS

4 HELMET

5 SPECTACLES

PREPARED BY APPROVED BY
DOC. NO.: WI/PROD/81
WORK INSTRUCTION FOR SAFETY AND
KCSL REV NO/DATE 00
ENVIRONMENT
ISSUE DATE: 05.08.2019

Section: - Surface Finishing Laboratory

FOLLOWING ARE THE SAFETY AND ENVIRONMENT INSTRUCTIONS TO BE TAKEN WHILE WORKING
IN SURFACE FINISHING LABORATORY.

1 Always wear the cotton gloves while working in the Laboratory.

2 Always Wear safety equipement during the Work

PPE (PERSONAL PROTECTIVE EQUIPEMENT)

1 SPECTACLES

2 SAFETY SHOES

3 LAB MASKS

SURGICAL HAND
4
GLUBS

5 LAB COAT

3 Switched off the AC, lights, at the end of shift and during lunch & tea break.

Go for the proper "First Aid" or required treatement in case of burn, cut or any other
4
injury.
Only authorised persons are allowed to touch the chemicals & Reagents inside the
5
Laboratory.
PREPARED BY APPROVED BY
DOC. NO.: WI/PROD/81
WORK INSTRUCTION FOR SAFETY AND
KCSL REV NO/DATE 00
ENVIRONMENT
ISSUE DATE: 05.08.2019

Section: - Surface Finishing Laboratory

FOLLOWING ARE THE SAFETY AND ENVIRONMENT INSTRUCTIONS TO BE TAKEN WHILE WORKING
IN SURFACE FINISHING LABORATORY.

1 Always wear the cotton gloves while working in the Laboratory.

2 Always Wear safety equipement during the Work

PPE (PERSONAL PROTECTIVE EQUIPEMENT)

SR.NO LOCATION PPE NAME PPE PHOTO

1 SAFETY SHOES

INCOMING +
FINAL
INSPECTION
AREA

2 HANDGOLVES

3 Switched off the AC, lights, at the end of shift and during lunch & tea break.

Go for the proper "First Aid" or required treatement in case of burn, cut or any other
4
injury.

Only authorised persons are allowed to touch the chemicals & Reagents inside the
5
Laboratory.

PREPARED BY APPROVED BY
DOC. NO.: WI/PROD/81
WORK INSTRUCTION FOR SAFETY AND
KCSL REV NO/DATE 00
ENVIRONMENT
ISSUE DATE: 05.08.2019

Section: - Surface Finishing Laboratory

FOLLOWING ARE THE SAFETY AND ENVIRONMENT INSTRUCTIONS TO BE TAKEN WHILE WORKING
IN SURFACE FINISHING LABORATORY.

1 Always wear the cotton gloves while working in the Laboratory.

2 Always Wear safety equipement during the Work

PPE (PERSONAL PROTECTIVE EQUIPEMENT)

SR.NO LOCATION PPE NAME PPE PHOTO

14 GUM BOOTS

15

ETP AREA

16 SPECTACLES

15 MASKS

3 Switched off the AC, lights, at the end of shift and during lunch & tea break.

Go for the proper "First Aid" or required treatement in case of burn, cut or any other
4
injury.

Only authorised persons are allowed to touch the chemicals & Reagents inside the
5
Laboratory.
PREPARED BY APPROVED BY
P1 P2 P5

P3 P4 P6

P7 P8 P9

You might also like