Scribd
Upload
1K views

DC Motor Problem Solving

1. A 220V DC series motor has resistances of 0.15Ω and 0.1Ω for the armature and field. With an external 1Ω resistance added, the new steady state current is 30A and speed is 858.8 rpm assuming constant load torque. 2. A DC shunt motor runs at 1000rpm and 20A initially with resistances of 0.5Ω and 220Ω. If the field resistance increases 5%, the new current is 20A and speed is 1055.14 rpm at constant load torque.

Uploaded by

Mac Raphael Villanueva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views

DC Motor Problem Solving

1. A 220V DC series motor has resistances of 0.15Ω and 0.1Ω for the armature and field. With an external 1Ω resistance added, the new steady state current is 30A and speed is 858.8 rpm assuming constant load torque. 2. A DC shunt motor runs at 1000rpm and 20A initially with resistances of 0.5Ω and 220Ω. If the field resistance increases 5%, the new current is 20A and speed is 1055.14 rpm at constant load torque.

Uploaded by

Mac Raphael Villanueva
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 3

Problem Solving:

1. A 220 V d.c series motor has armature and field resistances of 0.15 Ω and 0.10 Ω
respectively. It takes a current of 30 A from the supply while running at 1000 rpm. If an
external resistance of 1 Ω is inserted in series with the motor, calculate the new steady
state armature current and the speed. Assume the load torque remains constant.

Solution

The problem has first been be pictured in the following figure 41.3.
1Ω

n1 n2
Ia1=30A ra=0.1Ω Ia2 ra=0.1Ω
+ +
Supply 0.15Ω Supply 0.15Ω
V = 220V V = 220V
- -
Case 1 Case 2
Figure 41.3:
Since the load torque remains constant in both the cases, we have:
T =T
e1 e2 = TL
2
or, Kt Ia 1 = Kt Ia 2 2
or, 302 = I a2 2

∴ Ia 2 = 30A

Version 2 EE IIT, Kharagpur


Now equations involving back emfs:
E = V − I a 1 (rse + ra )
b1
K I n = 220 − 30(0.1 + 0.15)
g a1 1

K g 30 ×1000 = 212.5 V

In the second case:


E = V − I a 2 ( rse + ra + rext )
b2
K I n = 220 − 30(0.1 + 0.15 +1)
g a2 2

K g 30n2 = 182.5 V

Thus taking the ratio of Eb2 and Eb1 we get:


k g × 30 × n2 = 182.5
kg × 30 × 1000 212.5
182 . 5
∴ n2 = 212 . 5 ×1000
or, n2 = 858.8 rpm

2) Initially a d.c shunt motor having ra = 0.5 Ω and Rf = 220 Ω is running at 1000 rpm drawing
20 A from 220 V supply. If the field resistance is increased by 5%, calculate the new steady state
armature current and speed of the motor. Assume the load torque to be constant.
Solution
As usual let us begin the solution by drawing the shunt motor diagram.

Ia IL Ia IL +
+

If
ra If
M Te
V (supply) V (supply)
+
TL Rf
Eb
-
n rps -

Figure 41.2: D.C shunt motor.


For initial operating point: IL1 = 20 A, ra = 0.5 Ω and supply voltage V = 220 V.
Field current If1 = 220/220 A = 1 A
Armature current Ia1 = 20 A – 1 A = 19 A
Now we write down the expressions for the torque and back emf corresponding to the initial
condition.

Te1 = ktIf1Ia2 = kt × 1 × 19 = TL1


Eb1 = kgIf1n1 = kg × 1 × 1000 = V – Ia1ra = 220 – 19 × 0.5 = 210.5V
kg × 1 × 1000 = 210.5V
In this problem the field Resistance is changed and new value of field resistance is Rf2 = 1.05
× 220 = 231 Ω. So new field current is I f 2 = 220231 = 0.95 A. Let the new steady state armature
current be Ia2 and the new speed be n2. Since load torque remains constant, we have:

Te1 = Te2
kI I =k I I
t f 1 a1 t f 2 a 2
I I
or, I f 1 Ia1 = f2 a2

or, 1×19 = 0.95 Ia2


19
or, Ia2 =
0.95
or, Ia2 = 20 A
To calculate the new speed n2, we have to calculate the new back emf:

Eb2 = kg If2 n2 = kg × 0.95 × n2 = 220 – 20 × 0.5 = 210V


kg × 0.95 × n2 = 210V

∴ kg × 0.95 × n2 = 210.5
kg × 1 × 1000 210
or, n2 210.5 1000
= ×
210 0.95
∴n2 = 1055.14 rpm

You might also like