0% found this document useful (0 votes)
111 views

Jambaran Tiung Biru Project: Electrical Power and Control Cable Schedule - Substation No. 1

This document provides a cable schedule for Substation No. 1 that includes 18 cables. It lists the designation, from/to equipment, voltage level, cable length, number of cores, core size, cable type, and remarks for each cable. The cables are used for control and status signals between various equipment like the 0.4kV switchgear, unit control panels, variable speed drives, and motors.

Uploaded by

Alif Anshar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
111 views

Jambaran Tiung Biru Project: Electrical Power and Control Cable Schedule - Substation No. 1

This document provides a cable schedule for Substation No. 1 that includes 18 cables. It lists the designation, from/to equipment, voltage level, cable length, number of cores, core size, cable type, and remarks for each cable. The cables are used for control and status signals between various equipment like the 0.4kV switchgear, unit control panels, variable speed drives, and motors.

Uploaded by

Alif Anshar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

JTB-RJJ000-E0-SCH-420-00103

Electrical Power and Control Cable Schedule - Substation No. 1


JAMBARAN TIUNG BIRU PROJECT MPI : Not Classified
23-May-19
Rev 0

DESIGNATION Cable Gland


Cable Derated
P Voltage Level Cable OD
Length Ampacity
Discipline

From To Number of Source-End Load-End (Individual Engineering


Service Core/ Core Coil at
No Rev Cable Tag. No Core/Pair/ Cable Designation Remarks Shield) Status CWP
Description Pair/Triad Size Node
Triad G/ IS/non-IS (Note 3)
L/ G/A H/ L/
Equipment Tag No. Description Equipment Tag No. Description kW Volt m mm A Gland H/N Gland A/
N /N N N
N

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


18 0 E C-420UCP9400-A 420-SWG9061A 420-UCP9400 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


22 0 E C-420UCP9400-B 420-SWG9061A 420-UCP9400 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

VSD-DAC Starter Motor for GTG-A Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


38 0 E C-420UCP9100UF1300 420-VSD9100UF1300 420-UCP9100UF1300 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
(Motor) kV) STATUS

VSD-Liquid Fuel Boost Pump for Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


45 0 E C-420UCP9100M2200 420-VSD9100M2200 420-UCP9100M2200 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
GTG-A (Motor) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


49 0 E C-420UCP9100-A 420-SWG9061A 420-UCP9100 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


53 0 E C-420UCP9100-B 420-SWG9061A 420-UCP9100 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


56 0 E C-420UCP9100-C 420-SWG9061A 420-UCP9100 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


60 0 E C-420UCP9100-D 420-SWG9061A 420-UCP9100 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


64 0 E C-420UCP9100-E 420-SWG9061A 420-UCP9100 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

VSD-Water Purge for GTG-A Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


71 0 E C-420UCP9100M2610 420-VSD9100M2610 420-UCP9100M2610 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
(Motor) kV) STATUS

VSD-DAC Starter Motor for GTG-B Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


87 0 E C-420UCP9200UF1300 420-VSD9200UF1300 420-UCP9200UF1300 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
(Motor) kV) STATUS

VSD-Liquid Fuel Boost Pump for Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


94 0 E C-420UCP9200M2200 420-VSD9200M2200 420-UCP9200M2200 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
GTG-B (Motor) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


98 0 E C-420UCP9200-A 420-SWG9061A 420-UCP9200 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


102 0 E C-420UCP9200-B 420-SWG9061A 420-UCP9200 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


105 0 E C-420UCP9200-C 420-SWG9061A 420-UCP9200 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


109 0 E C-420UCP9200-D 420-SWG9061A 420-UCP9200 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


113 0 E C-420UCP9200-E 420-SWG9061A 420-UCP9200 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

VSD-Water Purge for GTG-B Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


120 0 E C-420UCP9200UF2610 420-VSD9200UF2610 420-UCP9200UF2610 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
(Motor) kV) STATUS

VSD-DAC Starter Motor for GTG-C Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


135 0 E C-420UCP9300UF1300 420-VSD9300UF1300 420-UCP9300UF1300 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
(Motor) kV) STATUS

VSD-Liquid Fuel Boost Pump for Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


142 0 E C-420UCP9300M2200 420-VSD9300M2200 420-UCP9300M2200 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
GTG-C (Motor) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


146 0 E C-420UCP9300-A 420-SWG9061A 420-UCP9300 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


150 0 E C-420UCP9300-B 420-SWG9061A 420-UCP9300 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


153 0 E C-420UCP9300-C 420-SWG9061A 420-UCP9300 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

Page 10 of 23
JTB-RJJ000-E0-SCH-420-00103
Electrical Power and Control Cable Schedule - Substation No. 1
JAMBARAN TIUNG BIRU PROJECT MPI : Not Classified
23-May-19
Rev 0
DESIGNATION Cable Gland
Cable Derated
P Voltage Level Cable OD
Length Ampacity
Discipline
From To Number of Source-End Load-End (Individual Engineering
Service Core/ Core Coil at
No Rev Cable Tag. No Core/Pair/ Cable Designation Remarks Shield) Status CWP
Description Pair/Triad Size Node
Triad G/ IS/non-IS (Note 3)
L/ G/A H/ L/
Equipment Tag No. Description Equipment Tag No. Description kW Volt m mm A Gland H/N Gland A/
N /N N N
N

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


157 0 E C-420UCP9300-D 420-SWG9061A 420-UCP9300 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


161 0 E C-420UCP9300-E 420-SWG9061A 420-UCP9300 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus A) kV) STATUS

VSD-Water Purge for GTG-C Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


168 0 E C-420UCP9300UF2610 420-VSD9300UF2610 420-UCP9300UF2610 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
(Motor) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


197 0 E C-420UCP9400-C 420-SWG9061B 420-UCP9400 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus B) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


201 0 E C-420UCP9400-D 420-SWG9061B 420-UCP9400 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus B) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


205 0 E C-420UCP9100-F 420-SWG9061B 420-UCP9100 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus B) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


209 0 E C-420UCP9100-G 420-SWG9061B 420-UCP9100 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus B) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


213 0 E C-420UCP9200-F 420-SWG9061B 420-UCP9200 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus B) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


217 0 E C-420UCP9200-G 420-SWG9061B 420-UCP9200 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus B) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


221 0 E C-420UCP9300-F 420-SWG9061B 420-UCP9300 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus B) kV) STATUS

0.4kV LV Switchgear & MCC - Cu/XLPE/LSZH/GSWA/LSZH (0.6/1 COMMAND &


225 0 E C-420UCP9300-G 420-SWG9061B 420-UCP9300 Unit Control Panel (UCP) Control Cable 24 Vdc 100 20 20C+E 2,5 25,9 - M32 H N G M32 H N G Non IS N A -
Substation-1 (Bus B) kV) STATUS

239 0 E P-HOLD 420-UPS9041A 230V AC UPS System DB-A HOLD PDB Instrument SS 1-A 5,25 Power Cable 230 72 2 2C+E 4 16,6 31,1 M25S H N N M25S H N N Cu/MGT/XLPE/LSZH (0.6/1 kV) Non IS N A -

251 0 E P-HOLD 420-UPS9041A 230V AC UPS System DB-A HOLD PDB Instrument SS 1-B 5,25 Power Cable 230 72 2 2C+E 10 19,9 53,4 M25 H N N M25 H N N Cu/MGT/XLPE/LSZH (0.6/1 kV) Non IS N A -

252 0 E P-HOLD 420-UPS9041A 230V AC UPS System DB-A HOLD PDB Instrument SS 1-B-UCP mechanical 3,16 Power Cable 230 72 2 2C+E 4 16,6 31,1 M25S H N N M25S H N N Cu/MGT/XLPE/LSZH (0.6/1 kV) Non IS N A -

Note :
1. Cable Tag Numbering System : P- = Power Cable
C- = Control Cable
I- = Instrument Cable
Example : P-PEM553303B = Power Cable for Equipment with Tag No PEM553303B
2. Cable Gland Numbering System
Hazardous = H
First Sequence (Area Classification)
Non-Hazardous = N
Lead Sheathed = L
Second Sequence (Lead / Non Lead Sheathed)
Non-Lead Sheated = N
GSWA = G
Third Sequence (Armour type) AWA = A
Non-Armoured = N
Example :
M32-HLG = M32 Sized Cable Gland, Suitable for Hazardous Area Installation,for Lead Sheathed Cable with GSWA armour.

3. A = Active
V = Void
D = Deleted
P-211UPDP9041A
4. Indoor Substation Cable

5. This instrument cable will be purchased by instrument and layed on instrument cable tray.

6. Cable provide by Vendor

Page 11 of 23

You might also like