Scribd
Upload
68 views

一，BIOS: Cherrytrail BIOS, OS, TP driver install instruction

1) To install the BIOS, format a USB drive to FAT32 and name it "WINPE", then copy the BIOS files to the drive and insert it into the device to automatically flash the BIOS. Make sure the battery has over 20% power. 2) To install the OS, follow the same USB preparation steps and insert it into the notebook to automatically install Windows. A prompt indicating installation was successful will be displayed. 3) To install the touchscreen driver, copy the driver file to a USB drive and insert it into the device to automatically install the touchscreen driver.

Uploaded by

RobertCastillo
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
68 views

一，BIOS: Cherrytrail BIOS, OS, TP driver install instruction

1) To install the BIOS, format a USB drive to FAT32 and name it "WINPE", then copy the BIOS files to the drive and insert it into the device to automatically flash the BIOS. Make sure the battery has over 20% power. 2) To install the OS, follow the same USB preparation steps and insert it into the notebook to automatically install Windows. A prompt indicating installation was successful will be displayed. 3) To install the touchscreen driver, copy the driver file to a USB drive and insert it into the device to automatically install the touchscreen driver.

Uploaded by

RobertCastillo
Copyright
© © All Rights Reserved
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Cherrytrail BIOS, OS, TP driver install instruction

一，BIOS
1. U disk formatted into FAT32 file system. Change the drive name, volume label name to: WINPE,
and copy all the BIOS files as below separately into the U disk as below:

2. Copy all the Bios files into the U disk separately, Connected the U disk with the device, press
the “flashBios” file, the device will install the Bios automatically!
Noted：

Make sure the battery have over 20% power.

二，OS
1. U disk formatted into FAT32 file system. Change the drive name, volume label name to: WINPE,
and copy all the BIOS files as below separately into the U disk as below:
2. Connect the U disk with notebook,

3. Press “ENTER”, notebook will install OS automatically, will show as below: chose boot from
WinPE64.

X：windows\system32>, means successfully!


4. Turn on the notebook will be OK!

三，TP driver
1. Copy the TP driver file into a U disk as below:

2. Click the below file named ”SileadTouch”, the device will install the TP driver automatically!

You might also like