Scribd
Upload
147 views1 page

KTD 1302

This document provides information about an NPN transistor called the KTD1302. It has a small flat package and is intended for audio muting applications. It can handle a maximum collector current of 300mA and collector power dissipation of 500mW. The transistor has a DC current gain ranging from 200-800 in the forward direction and 20 in the reverse direction when tested under specified conditions. It is marked with the numbers 1302.

Uploaded by

Pati Geni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
147 views1 page

KTD 1302

This document provides information about an NPN transistor called the KTD1302. It has a small flat package and is intended for audio muting applications. It can handle a maximum collector current of 300mA and collector power dissipation of 500mW. The transistor has a DC current gain ranging from 200-800 in the forward direction and 20 in the reverse direction when tested under specified conditions. It is marked with the numbers 1302.

Uploaded by

Pati Geni
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

SMD Type Transistors

NPN Transistors
KTD1302

1.70 0.1

■ Features
● Small Flat Package
● Audio Muting Application
0.42 0.1 0.46 0.1
● High Emitter-Base Voltage

1.Base
2.Collector
3.Emitter

■ Absolute Maximum Ratings Ta = 25℃


Parameter Symbol Rating Unit
Collector - Base Voltage VCBO 25
Collector - Emitter Voltage VCEO 20 V
Emitter - Base Voltage VEBO 12
Collector Current - Continuous IC 300 mA
Collector Power Dissipation PC 500 mW
Thermal Resistance From Junction To Ambient RθJA 250 ℃/W
Junction Temperature TJ 150
℃
Storage Temperature Range Tstg -55 to 150

■ Electrical Characteristics Ta = 25℃


Parameter Symbol Test Conditions Min Typ Max Unit
Collector- base breakdown voltage VCBO Ic= 100 μA， IE= 0 25
Collector- emitter breakdown voltage VCEO Ic= 1 mA， IB= 0 20 V
Emitter - base breakdown voltage VEBO IE= 100μA， IC= 0 12
Collector-base cut-off current ICBO VCB= 25 V , IE= 0 0.1
uA
Emitter cut-off current IEBO VEB= 12V , IC=0 0.1
Collector-emitter saturation voltage VCE(sat) IC=100 mA, IB=10mA 0.25
V
Base - emitter saturation voltage VBE(sat) IC=100 mA, IB=10mA 1
VCE= 2V, IC= 4mA (FOR) 200 800
DC current gain hFE
VCE= 2V, IC= 4mA (REV) 20
Collector output capacitance Cob VCB= 10V, IE= 0,f=1MHz 10 pF
Transition frequency fT VCE= 10V, IC= 1mA , f=100MHz 60 MHz

■ Marking
Marking 1302

1
www.kexin.com.cn

You might also like