Flow Indicator

Totaliser
(Model 1008V)

Masibus' Model 1008V is a panel mounted high precision rate totalizer

with separate rate and total displays. When connected with a 4/20mA flow
transmitter, 1008V will display the rate of flow in engineering unit and total Features
flow in the same or a different engineering unit. If the loop is disconnected
or auxiliary power fail, the displayed total and all programming Input selectable from current, voltage & frequency
parameters are stored in nonvolatile memory, and are automatically
recovered when the loop/auxiliary power is restored. Square root extractor

A selectable square root extractor function enables the output from a Advanced algorithm for mass flow calculation
differential flow transmitter to be displayed in linear units. When fitted with Separate rate and total displays
optional alarms, Model 1008V will detect high and low flow rates and can
perform simple flow batching operations. 8-digit totalizer with password protected resetting

The unit has a 4-digit flow rate and a 8-digit batch total/ inventory-total Programmable conversion factor
display. If the integrated total exceeds 8 digits, the display rolls to zero and
the number of such roll overs is recorded. The unit is also suitable to be Options :
used with flow transmitters having frequency output like turbine, PD,
magnetic pick-up type of flow elements. Alarm & Batch relay output

Model 1008V can be supplied with upto three inputs for compensated
Retransmission output (Isolated)
mass flow calculation. Advanced algorithm to carry out such
compensation for various compressible media like steam, ethylene etc. is
RS 485 serial communication
provided.

Model 1008V FIT is equipped with additional features like transmitter Weather proof / flame proof enclosure
power supply to excite field transmitter, isolated retransmission output for
recorder and serial communication on RS 485 over MODBUS RTU
protocol for PC based data acquisition and reporting system.

This model is packaged in 72mm x 144mm x 175mm metallic enclosure

and can also be packaged in weather proof IP 55 or flame proof
enclosures in wall mounted.

www.masibus.com [email protected]
TECHNICAL SPECIFICATIONS

General Alarm Relays/Comm. 6 discrete LEDs Status

Power Supply 230VAC OR 110VAC +/- 10% @ 50Hz Rate Indication Range Range programmable 0-9999
Terminal Selectable, Optional 24V DC Totalizing Range 0-99999999
Power Consumption <10 VA Decimal point Adjustable
Operating temperature 0 to 55 °C User interface 6 keys in front sealed membrane
Operating humidity < 95%RH (non condensing) Scan time 250 mS
Warm-up time 10 min Output
Isolation level 1500V DC Flow Alarms (Optional) 2 Relays rated 2A @ 230V AC
Process Value Batch Alarms (Optional) 2 Relays rated 2A @ 230V AC
Measurement accuracy ± 0.25% of F.S ± 1Digit - For I/P signal. Contact Type C-NO-NC Single change over
± (0.45% of reading + 1Digit) – for Retransmission Isolated 4-20 mA DC @ 500 Ohms
Integrated / Batch total. output (optional)
No. of signals 1(one) standard 2 & 3 (optional) Retransmission accuracy (0.1% of FS+1 count)
Input specification Linear 4-20 mA/ 1-5 V DC, Transmitter Power Supply 24VDC ±5% @ 50mA
0-20 mA/ 0-5 V DC. Serial Communication (Optional)
Frequency 0-10Khz Low level 0 to 1V, Baud rate 110-9600 bps, MODBUS, programmable
High level 5 to 15V
Connection Terminal (screwed)
Input impedance 250 Ohms for Current Input
Transmission distance < 1200m
20K Ohms for Voltage Input
Communication Slave mode
Polarity protection Provided
Application software Optional
Temperature drift <0.001% FS/ °C
Data pattern N,8,1
Digital Input 1 Nos. (optional)
Error correction method 16 bit CRC
Instrument display ZERO Value upon Input signal open Address range 1-99
or short connection
Calibration Software (front keys) Physical
Mounting type Panel,Vertical type
Set value
Bezel size 72mm(W) X 144mm(H)
Setting method Instrument keypad
Cut-out dimension 68mm(W) X 140mm(H)
Reset Front Key (password protected)
Depth with terminals 175 mm
Time Base for Totalizer Programmable (Day / Hr / Min / Sec)
Weight Less than 1.5 Kg
K Factor Function Yes (Optional)
Hazardous classification Use in safe area / Ex-Proof - Group IIA/IIB
Square root extraction Yes
Memory/Data storage IP Class Enclosure - IP20
Use EEPROM. Data will not be lost when
power off, can hold for 10 years Enclosure type General purpose MS Powder coated
Protection ( Optional ) IP55 or Ex-Proof - Group IIA/IIB
Display
2
Type & color Numeric 7 Segment RED LED Electrical connection 2.5mm / Screwed
0.56" 4 Digit Std. accessories Mounting clamps
Process Value
Total/Int. Value 0.36" 8 Digit

ORDERING CODE
Model Input Type Aux Power supply Communication Mounting Auxiliary o/p
1008V X XX X XX X X X
1 One C 4-20mA A1 110VAC N None P0 Panel Flow relay Batch relay Retx
2 Two# D 0-20mA A2 230VAC 2 Rs485 W1 Wall-IP55 N N N
3 Three# E 1-5VDC A3 24VDC FP Wall-FLP N N Y
F 0-5VDC Y Y N
G 0-10VDC Y Y Y
N 0-10 KHz (Lo level)
P 0-10 KHz (Hi level)
S Special*
X - Specify from table | Y - Yes | N - No | * - consult factory
T Digital I/p
#No. of 2 & 3 inputs means one input is exclusive for flow input and second and/or
third input is from pressure and/or temperature Tx for mass flow calculation application.

Head Office: Masibus Representative:

Masibus Automation And Instrumentation Pvt. Ltd.
B-30, GIDC Electronics Estate, Sector-25, Gandhinagar-382044, Gujarat, India.
Tel: +91 79 23287275-79, Fax: +91 79 23287281-82.
E-mail: [email protected], Web: www.masibus.com

All specifications are subject to change without notice due to continuous improvements.
www.masibus.com
Doc. Ref. CB-2/1008V/R2/0110 [email protected]