3

Citrus Base Cleaner (Aerosol)

Technical Data October, 2004

Product Description 3M™ Citrus Base Cleaner is a liquid cleaner/degreaser used to help dissolve and
remove dirt, grease, tar, and many non-curing type adhesives. It can also be used in
some cases to degrease substrates for adhesive bonding in place of many chlorinated
or petroleum based solvents. In many cases, however, the cleaner will not substitute
for etching or similar substrate preparation.

Typical Physical Note: The following technical information and data should be considered representative
Properties or typical only and should not be used for specification purposes.

Base: Citrus oil

Density lbs./gal. (approx.): 6.5 lbs.
Odor: Citrus
Flash point: -50°F (-46°C)
Color: Clear
Solids (by wt.): 3-5%
Propellent: Propane

Typical Performance Note: The following technical information and data should be considered representative
Characteristics or typical only and should not be used for specification purposes.
3M citrus base cleaner was tested for cleanup effectiveness on the following
adhesive/sealant product types:

Adhesive/Sealant Type Typical Effectiveness

SBR Very effective when adhesive is wet; very effective in most cases
when adhesive is dry.
Neoprene Very effective in most cases when adhesive is wet or dry.
Nitrile Effective in most cases when adhesive is wet or dry.
(Note: There are some nitriles that will not clean up when cured).
Asphalt and Asphalt Very effective in most cases when adhesives are wet or dry.
Reclaim Rubber
Acrylic Effective in most cases when adhesive is wet; relatively
ineffective in most cases when adhesive is dry.
Epoxies, Urethanes, Effective in most cases when adhesive is wet; relatively
and Polysulfides ineffective when adhesive is dry.
Vinyl Resin Relatively ineffective as a cleaning agent for this base type.
Butyl Effective when adhesive is wet; not very effective when dry.
Hot melt Relatively ineffective on hot melt adhesives.
Transfer Tape, misc. Will aid in the removal of many tapes. Cleaner is slow to
Adhesive backed tape dissolve tape residue.
3M™ Citrus Base Cleaner (Aerosol)

Features • No chlorinated or petroleum based solvents

• Cleans gently
• Fresh citrus scent

Handling/Application Note: 3M™ Citrus Base Cleaner may attack some plastics, painted materials and
Information rubbers which is why it should be tested on a small area of any surface being
cleaned before using.
Directions for Use:
Thoroughly coat 3M citrus base cleaner on surfaces or parts being cleaned. Wait a
few minutes to allow maximum penetration and loosening action. Then wipe away
with a clean, damp rag. Wipe with clean cloth, let air dry. Repeat application when
substance to be removed is too thick for maximum penetration.
Caution! This product should not be used as a hand cleaner and skin
contact should be avoided. This product may cause skin irritation on
prolonged or repeated contact. Do not rinse into waterways or sewers.

Storage Store product at 60-80°F (16-27°C) for maximum storage life. Rotate stock on a “first
in-first out” basis.

Shelf Life When stored at the recommended conditions in original, unopened containers, this
product has a shelf life of 24 months.

Precautionary Refer to Product Label and Material Safety Data Sheet for health and safety information before using this
product. For additional health and safety information, call 1-800-364-3577 or (651) 737-6501.
Information

Product Use All statements, technical information and recommendations contained in this document are based upon
tests or experience that 3M believes are reliable. However, many factors beyond 3M’s control can affect
the use and performance of a 3M product in a particular application, including the conditions under
which the product is used and the time and environmental conditions in which the product is expected to
perform. Since these factors are uniquely within the user’s knowledge and control, it is essential that the
user evaluate the 3M product to determine whether it is fit for a particular purpose and suitable for the
user’s method of application.

Warranty and Unless stated otherwise in 3M’s product literature, packaging inserts or product packaging for individual
products, 3M warrants that each 3M product meets the applicable specifications at the time 3M ships the
Limited Remedy product. Individual products may have additional or different warranties as stated on product literature,
package inserts or product packages. 3M MAKES NO OTHER WARRANTIES, EXPRESS OR IMPLIED,
INCLUDING, BUT NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS
FOR A PARTICULAR PURPOSE OR ANY IMPLIED WARRANTY ARISING OUT OF A COURSE OF
DEALING, CUSTOM OR USAGE OF TRADE. User is responsible for determining whether the 3M product
is fit for a particular purpose and suitable for user’s application. If the 3M product is defective within the
warranty period, your exclusive remedy and 3M’s and seller’s sole obligation will be, at 3M’s option, to
replace the product or refund the purchase price.

Limitation of Liability Except where prohibited by law, 3M and seller will not be liable for any loss or damage arising from the
3M product, whether direct, indirect, special, incidental or consequential, regardless of the legal theory

3
asserted, including warranty, contract, negligence or strict liability.

Industrial Business
Industrial Adhesives and Tapes Division
3M Center, Building 21-1W-10, 900 Bush Avenue
St. Paul, MN 55144-1000 Recycled Paper
800-362-3550 • 877-369-2923 (fax) 40% pre-consumer Printed in U.S.A.
www.3M.com/industrial 10% post-consumer ©3M 2004 78-6900-9699-1 (10/04)