leaflet 90NET-GB-CHL 10-11-2004 9:37 Pagina 1

Chloride UPS Systems

WORLD HEADQUARTERS
Via Fornace 30
40023 Castel Guelfo (BO)
Italy
Telephone: +39 0542 632 111
Facsimile: +39 0542 632 120
[email protected]

Closest Chloride Contact:

MKA4L0UK90NET

www.chloridepower.com Certificate No. EMS 76732 Certificate No. FM 11043

leaflet 90NET-GB-CHL 10-11-2004 9:37 Pagina 2

90-NET
from 60 to 800 kVA

UNINTERRUPTIBLE POWER SUPPLY

leaflet 90NET-GB-CHL 10-11-2004 9:37 Pagina 3

90-NET from 60 to 800 kVA

The Range • HFC (High Fault Clearance) Parallel;
Chloride’s 90-NET family is available enabling simultaneous switching on
from 60 to 800 kVA and is compatible of all available standby reserve lines,
with a wide range of battery with a downstream fault clearing
autonomies. Aspects of 90-NET’s capacity four times higher.
premium class performance are: Communication
• Single-cabinet industrialisation up to The system is fitted with a twin serial
500 kVA, saving floor space and port, a slot bay for expansion cards and
allowing for speedy commissioning a computer interface.
• Low input distortion, featuring A graphical liquid crystal display
THDi<5% without the need for bulky provides clear multilingual information
and expensive options and bringing on operating parameters.
significant benefits in terms of 90-NET is fully compatible with
reliability Chloride’s suite of connectivity
• High conversion efficiency (certified solutions which allows users to
from 92-93%), allowing reduction in preserve critical data and perform a
operating costs controlled shutdown of equipment in
• Capability of powering state-of-the- the event of a power disturbance.
art IT loads with high PF, depending
on the UPS rating. Monitoring
Flexibility for Customised Solutions The 90-NET family is fully compatible
with LIFE.net, Chloride’s real-time UPS
90-NET can be fully adapted to meet remote monitoring tool. LIFE.net is the
diverse requirements in terms of nearest you can get to having a
battery backup time, power, Chloride engineer permanently onsite.
redundancy and harmonic control. This service provides:
90-NET is fully compatible with • Continuous real time monitoring of
CROSS, Chloride’s static switch your UPS
assembly. CROSS provides additional • Automatic transmission of a daily
protection against potential problems status report
in the power distribution system by • Real time diagnosis of all UPS
immediately switching to reserve in the operational parameters
event of a fault. Other options include: • A remote fix capability
• Galvanic isolation transformer • Monthly UPS Operational status
• Flexible paralleling configurations report
• Wide remote connectivity • Technical advice regarding the
capabilities (TCP/IP, SNMP, J-Bus, operation of your UPS.
Profibus, RS232 etc.) • The data collected by LIFE.net provides
Chloride engineers with a detailed
Leading Technology history of operation over the full
Chloride employ patented Vector service LIFE of the UPS system.
Control technology (patents: 95 • Unique ETS function for trouble
P3875, 95 P3879 and 96 P3198) to shooting of the most common
increase the performance of power operating anomalies
components and enable active • Power Quality Monitoring to
conditioning of the load, bringing the effectively monitor power disturbance
following benefits: trends
• Improved performance for specific Applications
unbalanced load conditions
• Perfect load sharing between parallel 90-NET provides secure power
connected UPS systems (less than infrastructure for a wide range of
5% tolerance of any system output applications including:
load fraction from 0 to 100%). • Commercial processing systems
• Improved fault clearing capacity (with • Industrial automation
a peak of 200% of the inverter • Broadcasting and telecommunications
nominal current up to 5s) for systems
downstream short circuits. • Data centres.
• Reduced ownership costs through Secure Power Always
quick installation times and reduced
servicing. The correct installation of your UPS is
only the start of your relationship with
Reliabilty Chloride. We are pleased to offer a
90-NET uses intelligent double range of maintenance plans which will:
conversion technology. • Help deliver reliability to your load
This architecture combines the secure • Extend the life of your power
power provided by double conversion protection equipment
with the efficiency provided by digital • Optimise your capital expenditure
interactive technology. • Provide risk management at a fixed
cost
Up to eight 90-NET units may be • Provide a proactive approach to
connected in parallel, allowing Chloride disaster recovery.
to customise and adapt our solution to
your changing load requirements. Contact your local Chloride sales office
90-NET is available in the following for more information.
configurations: Delegate your power management
• Distributed Parallel; increasing power to the experts.
of the supply system whilst
controlling costs;
• Centralised Parallel; using an
additional common output cubicle
and providing a standby reserve line
for the whole system, and;
leaflet 90NET-GB-CHL 10-11-2004 9:37 Pagina 4

90-NET 60 80 100 120 160 200 250 300 400 500 600 800
TECHNICAL CHARACTERISTICS
Apparent nominal output
power at 25° C (kVA) 66 88 110 132 176 220 275 330 440 550 660 880
Apparent nominal output
power at 40°C (kVA) 60 80 100 120 160 200 250 300 400 500 600 800
INPUT
Nominal mains input
voltage/voltage tolerance (V) 400 ± 15% (380 V, 415 V selectable) three-phase
Minimum input voltage w/o
battery discharging -25% -25% -25% -25% -25% -25% -20% -20% -20% -20% -20% -20%
Nominal bypass input
voltage/voltage tolerance (V) 400 ± 10% (380 V, 415 V selectable) three-phase + neutral
Nominal input
frequency/frequency tolerance (Hz) 50 ± 5% (60Hz selectable)
Input current distortion at maximum
input power THD (%) 5* 5* 5* 5* 5* 5* 5 5 5 5 5 5
OUTPUT
Nominal output voltage (V) 400 (380 V, 415 V selectable) three-phase + neutral
Output voltage stability by
load variation 0 - 100% (%)
static ±1
dynamic Complies with IEC/EN 62040-3,Class 1
Output frequency (nominal) (Hz) 50 (60 Hz selectable)
Output frequency variation (%)
with mains synchronisation ± 0.75 (1.5, 2.5, 6.0 selectable)
with own reference ± 0.05
Inverter overload capacity 125% for 10 min., 150% for 1 min.
Nominal output power factor PF 0.8
Automatic adjustment
of nominal power with temperature 110% at 25° C, 100% at 40° C
GENERAL
Operating temperature (°C) 0-40
Recommended battery
temperature (°C) +15/+25
Relative humidity
(without condensation at 20° (C) <90%
Protection level IP 20
Colour RAL 7035
Noise at 1 m (dBA) 62 62 62 64 65 65 68 68 70 72 75 75
AC/AC efficiency (%)
in double conversion mode 92 92 93 93 93 93 92 93 93 93 92 92
AC/AC efficiency (%)
in digital interactive mode 97
Parallel configuration up to 8 units in modular configuration;
up to 7 units plus system static switch in HFC and centralised configuration
DIMENSIONS AND WEIGHT
Height (mm) 1780 1780 1780 1780 1780 1780 1780 1780 1780 1780 1780 1980
Width (mm) 820 820 1020 1020 1420 1420 1620 1620 1620 2020 3860 3860
Depth (mm)** 830 830 830 830 830 830 830 830 830 830 1030 1030
UPS weight (kg) 660 660 720 875 1290 1290 1880 1880 2080 2580 3960 4820
* With “Low THDi” option ** Without front handle (+28 mm with front handle)

This publication is issued to provide outline information only and is not deemed to form any part of any offer and contract. The company has a policy of continuous product development
and improvement, and we therefore reserve the right to vary any information without prior notice. MKA4L0UK90NET Rev. 5-11/2004