Scribd
Upload
63 views

Engineering Measurement

This document discusses different types of engineering gauges used to measure dimensions. It describes plain gauges, types of gauges according to their purpose or the surface being tested. Fixed gauges are advantageous because they provide uniform dimensional references and do not require power. Examples of gauges discussed include plain plug gauges, snap gauges, adjustable gap gauges, combined limit gauges, radius gauges, and position gauges. The document is a lecture on engineering measurement that outlines gauges and their applications.

Uploaded by

Rajesh Meppayil
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
63 views

Engineering Measurement

This document discusses different types of engineering gauges used to measure dimensions. It describes plain gauges, types of gauges according to their purpose or the surface being tested. Fixed gauges are advantageous because they provide uniform dimensional references and do not require power. Examples of gauges discussed include plain plug gauges, snap gauges, adjustable gap gauges, combined limit gauges, radius gauges, and position gauges. The document is a lecture on engineering measurement that outlines gauges and their applications.

Uploaded by

Rajesh Meppayil
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 18

LOGO

Engineering Measurement

Dr. Juma Y. Alaydi

Gauges
Outline

1 Plain Gauges

2 Types of Gauges

3 Advantage of fixed gauges

4 Gauge Design

April 6, 2012 2 Engineering Measurement


April 6, 2012 3 Engineering Measurement
1. According to their type:
A. Standard and limits gauges.
B. Limits gauges.
2. According to their purposes:
A. Workshop.
B. Inspection
C. Reference or master gauges
April 6, 2012 4 Engineering Measurement
3. According to the form of the tested surface:
A. Plug gauges for checking holes.
B. Snap and ring gauges for checking shafts

4. According to their design


A. Single limits and double limit gauges.
B. Single ended and double ended gauges.
C. Fixed and adjustable gauges

April 6, 2012 5 Engineering Measurement


April 6, 2012 6 Engineering Measurement
April 6, 2012 7 Engineering Measurement
April 6, 2012 8 Engineering Measurement
Advantage of fixed gauges
1- provide positive dimensional information

2- portable and independent of power supply availability

3- involve no other auxiliary equipment and set ups

4- can be designed to check combinations of several


dimensions comprising lengths diameter and angles.

5- can be designed to check inspect interrelated features, for


size, location, form, alignment

6- provide uniform reference standards

7- are not expensive

April 6, 2012 9 Engineering Measurement


Plain Plug Gauges

‘Go’ and ‘No Go’ plain plug gauges

Pilot Plug Gauge

April 6, 2012 10 Engineering Measurement


section of handle

April 6, 2012 11 Engineering Measurement


Advantages of gauges with renewable ends

1- Worn or damaged end can be replaced conveniently

2- In the event of scraping of gauge, handle can be used for


other gauge

3- To reduce the weight, handle can be made of plastic

April 6, 2012 12 Engineering Measurement


progressive type

are provided on same side separated by a small


distance
First ‘Go’ portion is inserted in the hole which
would be further obstructed by ‘NOT GO’ portion
if hole is of tolerable size

April 6, 2012 13 Engineering Measurement


Snap Gauges

April 6, 2012 14 Engineering Measurement


1- Adjustable Type Gap Gauges

2- Combined Limit Gauge

April 6, 2012 15 Engineering Measurement


Contour Gauges
1- employed checking the dimensional accuracy and shape
of irregular work

2- radius gauges are employed for checking the shape of


fillets. The radius gauge which is used for gauging
both internal and external radii

3- Other types of simple contour gauges are those for thread


pitches. Cutting coot angles, form tools profiles and gear
tooth profiles

April 6, 2012 16 Engineering Measurement


3- Position Gauge

April 6, 2012 17 Engineering Measurement


LOGO

Dr. Juma

You might also like