Scribd
Upload
285 views

HP Transformer Oils

HP Transformer Oils is designed for safety and is free of carcinogenic PCBs and PAHs. It is intended for use in electric transformers, switch gears, and circuit breakers as an insulating fluid. It has high oxidation stability, excellent aging properties, and long product life. It meets Indian standards IS: 335:1993 and IS-335-2018 Type II for transformer oils and is certified by CPRI and ERDA. The document provides details on its physical and chemical properties.

Uploaded by

Noble Jose Kunhipara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
285 views

HP Transformer Oils

HP Transformer Oils is designed for safety and is free of carcinogenic PCBs and PAHs. It is intended for use in electric transformers, switch gears, and circuit breakers as an insulating fluid. It has high oxidation stability, excellent aging properties, and long product life. It meets Indian standards IS: 335:1993 and IS-335-2018 Type II for transformer oils and is certified by CPRI and ERDA. The document provides details on its physical and chemical properties.

Uploaded by

Noble Jose Kunhipara
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

HP TRANSFORMER OILS

DESCRIPTION
HP TRANSFORMER OIL is designed for human safety and free from carcinogenic Poly chlorinated
Bi-phenyls (PCB) and Poly aromatic hydrocarbon (PAH).

PROPOSED USAGE
• Electric transformers
• Switch gears
• Circuit breakers which require insulating fluids
• Has very high oxidation stability
• Excellent ageing properties resulting in long product life

APPROVALS
HP TRANSFORMER OIL is certified Central Power Research Institute (CPRI), Bangalore and
Electrical Research and Development Association (ERDA), Vadodara
HP TRANSFORMER OIL is certified Central Power Research Institute (CPRI), Bangalore and
Electrical Research and Development Association (ERDA), Vadodara

MEETING SPECIFICATION
HP TRANSFORMER OIL exceeds IS: 335:1993 (Reaffirmed 2005) performance levels.
It also meets IS:335-2018 TYPE II UNINHIBITED.

PHYSICO-CHEMICAL PROPERTIES

Appearance Clear and transparent and


free from suspended matter of
sediments

Density at 29.5 ºC, g/cc 0.8279

Kinematic viscosity, cst


At 27ºC 16.46
At 40ºC 11

Interfacial tension at 27ºC 0.044 N/m

Flash point pensky-marten (closed),ºC 172

Pour point,ºC -18

Neutralization value, mg KOH/g


a) Total acidity Nil
b) Inorganic acidity/alkalinity Nil

For details log on to: www.hplubricants.in | Email: [email protected] | Toll Free: 1800 121 4725 | Phone: +91 22 23030000
Follow us on : www.facebook.com/hplubricantsfromhindustanpetroleum
HP TRANSFORMER OILS

Corrosive sulphur Non corrosive

Electric strength (breakdown voltage) –kV(rms)


a) New unfiltered oil 72

Dielectric dissipation factor at 90 ºC 0.00025

Specific resistance (resistivity)


a) A:90 ºC 750x1012 ohm-cm
b) A:27 ºC 11300x1012 ohm-cm

Oxidation stability
a) Neutralization value after oxidation, mg KOH/g 0.4
b) Total sludge after oxidation,% by wt. 0.1

AGEING CHARACTERISTICS AFTER AGEING

Open breaker method with copper characteristics

Specific resistance (resistivity)


a) A:27 ºC 350x1012 ohm-cm
b) A:90 ºC 19x1012 ohm-cm
c) dielectric dissipation factor at 90 ºC 0.0025/2.08 DC
d) total acidity NIL
e) total sludge NIL

Presence of oxidation inhibitor,% by wt Absent

Water content, mg/kg(ppm) 50

SK value (%) 1

For details log on to: www.hplubricants.in | Email: [email protected] | Toll Free: 1800 121 4725 | Phone: +91 22 23030000
Follow us on : www.facebook.com/hplubricantsfromhindustanpetroleum

You might also like