G+ Super Mass Production Tool For GP330XX

======================================================================
V77 2012/12/26
1. NAND Driver v0.25.0

V76 2012/12/26
1. NAND Driver v0.24.0

V75 2012/11/22
1. NAND Driver v0.23.0

2. Updater
a. Support update nand flash ac timing
b. Ota supports Chinese filename

V74 2012/11/12
1. NAND Driver v0.22.0

V73 2012/11/01
1. NAND Driver v0.21.0

2. update scanram.bin

V72 2012/09/27
1. NAND Driver v0.20.0

V71 2012/09/26
1. NAND Driver v0.19.0

2. update scanram.bin

3. Updater:
a. Support ota upgrade
b. Support erase data and cache by system update
c. Add confirm UI flow
d. Do not format user partition except partition table changed

4. Bootloader:
a. Support HDMI output

V70 2012/08/21
1. NAND Driver v0.18.1

V69 2012/08/15
1. Updater:
a. fix insmod nand ko parameters issue

V68 2012/08/15
1. NAND Driver v0.18.0

2. Updater:
a. add pmu power control for tool poweroff
b. add insmod gp_nand_module_core.ko parameters

3. Bootloader:
a. config nand from bootheadr parameter
b. fix time count for wirte hibernation image

4. Bootheader:
 a. add nand flash boot config

V67 2012/08/10
1. NAND Driver v0.17.0

2. Updater:
a. Fixed print version error issue
b. Use uname for insmod path

3. Bootloader:
a. improve snapshot reading and writing
b. fix time count for wirte hibernation image

V66 2012/07/30
1.NAND Driver v0.13.1

2. update scanram.bin of auto scan dly_dqs and dly_dqs_bit_delay with

V65 2012/07/30
1.NAND Driver v0.16.1

2. Bootloader:
a. Add resume animation

3. update scanram.bin of auto scan dly_dqs and dly_dqs_bit_delay with

V64 2012/07/26
1.NAND Driver v0.16.1

2. Bootloader:
a. Fix show logo white line issue

V63 2012/07/24
1.NAND Driver v0.13.1

2.ISP:
a. Using custom timing value at isp

V62 2012/07/24
1.NAND Driver v0.15.1

2.ISP:
a. Using custom timing value at isp

V61 2012/07/23
1.NAND Driver v0.15.0

V60 2012/07/17
1.NAND Driver v0.13.0

2.ISP:
a. Add animation preload flow.
b. Fix UI option overlapping issue on 480x272 panel.

3.Bootpack.bin:
a. Extend hibernation image size to 192MB
b. Update scanram.bin memory read/write test base address.
4. Bootloader:
a. Fix memory alloc for fastboot logo

V59 2012/07/17
1.NAND Driver v0.14.1

2.ISP:
a. Add animation preload flow.
b. Fix UI option overlapping issue on 480x272 panel.

3.Bootpack.bin:
a. Extend hibernation image size to 192MB
b. Update scanram.bin memory read/write test base address.

4. Bootloader:
a. Fix memory alloc for fastboot logo

V58 2012/07/03
1.NAND Driver v0.13.0

2.MP Tool v0.9.9.19

3.ISP:
a. add upgrade preload data function.

4.Bootloader:
a. nand driver v0.13.0.
b. check power key press before show logo.

5.Bootresource:
a. add power key long press check option.(default is disable)

V57 2012/07/03
1.NAND Driver v0.14.1
a. for GPL modify

2.MP Tool v0.9.9.19

3.ISP:
a. add upgrade preload data function.

4.Bootloader:
a. nand driver v0.14.1.
b. check power key press before show logo.

5.Bootresource:
a. add power key long press check option.(default is disable)

V56 2012/06/28
1.NAND Driver v0.14.0
a. Reduce MP Toool isp U0A time for around 25s, other nand such as 2BTR a
b. Improve read performance for around 26%, ex U0A imrpove from 14.9M to 19
c. Auto finding AC timing when isp.
d. Support Toshiba read retry nand TC58NVG5D2HTA00,TC58NVG4D2HTA00.
 e. Support Samsung K9LCG08U0A 2die nand.
f. Support Samsung K9GAG08U0F nand.
g. Enable cache read and cache program for Micron nand.
h. Able to access extended block of nand if nand have
i. Improve block replacment perforamnce by ping pong read or cache read.
j. Boot sections apply strong pages for all nand.
k. Bugs fixed and misc modification.

V55 2012/06/28
1.MP Tool v0.9.9.18
a. fix wait connection fail.

2.Add burning_all_by_usb_OnlyNandPlatform.conf

V54 2012/06/18
1.NAND Driver v0.13.0
a. add get nand version at hal ko

2. MP Tool:
a. fix upgrade firmware.bin of samplecode fail issue.
b. speed up isp upgrade time.(30 sec)
c. add nand driver version check flow.

3. Scanram:
a. add checksum check in Resume flow.

4. Bootloader:
a. LVDS panel support.
b. enable backlight adjust and core power pwn control from bootresource.

5. Add hkc_ddr3_nand platform on updater_release folder.

6. Updater:
a. add progress bar for generating customized firmware.
b. add error handling for generating customized firmware.
c. add update nand ac r/w timing function.
d. add nand driver version check flow.

V53 2012/06/11
1.NAND Driver v0.11.1
a. Modify SBULL_MINORS to 16 to fix 'nanda: p30 size extends beyond EOD,
truncated' warning that cause by kernel partition table max number modify to 16."

2.MP Tool:
a. fix unstabele issue.

V52 2012/05.23
1.Bootloader
a. merger jump as single function.
b. disable WDT1/2 before jump
c. nand driver v0.11.0 - when main header timing value is ff, use timing at aux
header instead
d. nand driver v0.10.0 - use main header ac dma timing.

2.NAND Driver v0.11.0

V51 2012/05.22
1.Scanram
a. remove WDT 10 sec setting before jump to bootloader.
b. RTC Dummy1 0xA5 change to scan memory and not restore value.

V50 2012/05.21
1.NAND driver 0.9.0:
a.Reduce flush out number when use browser app.
b.Improve play video not smooth at beginning.
c.Improve web browse while playing mp3 not smooth sound.
d.Improve data partition sequential write benchmark value
2.Bootloade(update NAND driver):
a.Reduce flush out number when use browser app.
b.Improve play video not smooth at beginning.
c.Improve web browse while playing mp3 not smooth sound.
d.Improve data partition sequential write benchmark value

V49 2012/05.18
1.NAND driver 0.8.8 - fix ping pong read sometime boot hang and sometime compare
mismatch.
2.ISP:
1) Fix Iotrap read fail issue.
2) Update NAND Driver(0.8.8).
3.Tool:
1) Add only erase NAND conf

V48 2012/05.10
1.ScanRam:
1) Fix USB PHY value write issue.
2) Remove CLOSE_WIF, Add DMEM_Auto_Power_Down_Enable on INI.
3) DMEM_Auto_Power_Down_Enable is disable.
4) ScanRam will print IC Version.
5) ScanRam will do memory address scan on suspend/resume or normal
enter android system.

V46 2012/04/29
1.ScanRam:
1) Fix the hang up problem in suspend-resume
2) Refer correct data from power off as power on
3) Add 10sec for WDT for hang up of resume function
4) Remove useless DRAM INI setting
2. Bootloader:
1) Add external updater check before enter default updater
2) fix cache operation when sd dma read
3) fix memcpy bug.

V45 2012/04/24
1.NAND driver 0.8.3.1 - Fix update then first boot fail problem.
2.Modify bootloader
1) Add external updater check before enter default updater
2) fix cache operation when sd dma read
3) fix memcpy bug.
V44 2012/04/18
1.NAND driver 0.8.2.1
2.Fix EVM + SD1 burning problem

V43 2012/04/12
1.New scanram.bin
2.New small_isp.bin for avoiding jumping error

V42 2012/04/11
1.Avoid format dialog for windows 7.

V41 2012/04/09
1.NAND driver 0.8.1.1

V40 2012/04/07
1.MP-Tool 0.9.9.17

V39 2012/04/05
1.Updater V1.48
2.NAND driver 0.7.8.1

V38 2012/04/03
1.Download small isp for saving
2.NAND driver 0.7.7.1

V37_1 2012/03/30
1.Speed up for ISP reconnection
2.MP-Tool 0.9.9.16
3.Fix ADC 800K Hz problem
4.Fix display flash problem in bootloader
5.Modify conf\USBTool.conf for auto downloading
ReadyDeviceCount="4"

V36 2012/03/29
1.Fix ADC driver of bootloader
2.Add ISP Function - plug out USB cable for power off instead of auto power off.

V35 2012/03/28
1.NAND driver 0.7.6 1
2.Increase replug period
3.MP-Tool 0.9.9.15
4.Disconnect at the beginning.
5.Remove PM debug message.
6.Change bootheader/scanram/
7.new bootheader maker

V34 2012/03/26
1.NAND driver 0.7.5.1

V33 2012/03/23
1.NAND driver 0.7.3.1
2.MP-Tool 0.9.9.14
3.Chang NAND burst write size to 0x800. (Also modify bootresource.bin)

V32 2012/03/22
1.NAND driver 0.7.2.1

V31 2012/03/21
1.NAND driver 0.7.1.1
2.MP-Tool 0.9.9.15
3.Fix hangs up problem for sync function
4.Add volume label plan
5.Apply new bootloader with high-performance booting and hibernation.

V30 2012/03/19
1.NAND driver 0.7.0
2.Change fast burning size limit to 32MB.

V29 2012/03/12
1.Fix the problem as it sets genearal erase

V28 2012/03/12
1.New scanRam, preinit, bootloader binary
2.Change Pll2 to 891MHz.

V27 2012/03/09
1.Driver Nand V0.6.9.1
2.Fix miner bug for isp
3.Add erase option for NAND
4.Update bootheader to 1.44

V26 2012/03/02
1.MP-Tool 0.9.9.14 - Cancel openport step

V25 2012/02/24
1.MP-Tool 0.9.9.13
2.Set fixed CPU frequency

V24 2012/02/21
1.Fix downloading problem with U0E nand.

V23 2012/02/20
1.Driver Nand V0.6.6.1
2.New MP-Tool 0.9.9.12- It supports multi-downloading with different timing.
3.New isp flow - download bootpack.bin at the beginning.

V22 2012/02/13
1.Driver Nand V0.6.4.1
2.Bootloader V22
3.Change new interface of MP-tool.
Please refer https://wiki.generalplus.com.cn/super_mptool

V21 2012/01/20
1.Driver Nand V0.6.1.1
2.Add auto power off after burning was finished
3.Sync scanram from SDwriter 1.41

V20 2012/01/13 -- For test

V19 2012/01/05
1.Driver Nand V0.5.9.1

V18 2012/01/03
1.Fix fastboot(sleep) problem

V17 2011/12/31
1.Support burning to SD card.
2.Support multi-burning.
Infor.:
Demokit3 + Nand by SD1 card = 7 min 01 sec
Demokit3 + Nand by All USB = 6 min 57 sec
Demokit1 + SD0 by USB + SD1 card = 3 min 38 sec
Demokit1 + SD0 by All USB = 4 min 03 sec

V16 2011/12/30
1.Fix dram AC_CONFIG parameter of bootheader.bin for all platforms
2.Increase timeout to 30s for waiting connection

V15 2011/12/29
1.Fix unstable problem which come from multi-thread function
2.Increase timeout to 30s for returning status
3.Add V5200 platform burning by SD card

V14 2011/12/28
1.Implement new structure for burning
2.Check Firmware and show message for burning by SD card.

V13 2011/12/27
1.Fix burning problem
2.Use checking checksum version for fastboot

V12 2011/12/26
1.Driver Nand V0.5.8.1
2.Fix fastboot
3.Fix burning problem

V11 2011/12/22
1.Driver Nand V0.5.6

V10 2011/12/21
1.Show error message if no download file
2.Add ip address setting for download file
3.Driver Nand V0.5.5

V09 2011/12/15
1.Support burning from SD card

V08 2011/12/13
1.Add fastboot function

V07 2011/12/08
1.Fix power key conflict issue of NAND suspend/resume
2.Fix NAND burning with many blocks. Need to check again
3.Upgrade scanram.bin to SD writer V1.38
4.Fix sd detect problem in isp program

V06 2011/12/06
1.Improve normal boot/updater boot speed
2.Add NAND driver V0.5.2
3.Add fastboot function in bootloader
4.Fix the wait connection error of MP-Tool

V05 2011/12/03
1.support NAND demokit3+NAND burning
2.support NAND EVM+NAND burning