Scribd
Upload
746 views

Data Sheet

The BIT3260 is a high frequency PWM controller integrated circuit designed for LED driver applications. It operates from 10V to 18V and integrates functions needed for boost conversion in a small SOP-8 package. Key features include voltage mode PWM control, current limiting, adjustable frequency, soft start, over temperature protection, and under voltage lockout. It is well-suited for applications such as LED backlights, portable device backlights, and LCD displays.

Uploaded by

celestino secundino
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
746 views

Data Sheet

The BIT3260 is a high frequency PWM controller integrated circuit designed for LED driver applications. It operates from 10V to 18V and integrates functions needed for boost conversion in a small SOP-8 package. Key features include voltage mode PWM control, current limiting, adjustable frequency, soft start, over temperature protection, and under voltage lockout. It is well-suited for applications such as LED backlights, portable device backlights, and LCD displays.

Uploaded by

celestino secundino
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

BIT3260

Low Cost LED Driver

General Description Features


Voltage Mode PWM Controller
BIT3260 is a high frequency PWM controller
10V ~ 18V operation voltage
integrating required functions for boost conversion
Current limit
in a small SOP-8 package. A low 0.2V feedback
Frequency adjustable
voltage and over voltage protection make BIT3260
Internal Soft-Start
an ideal controller for LED backlight supplies.
Maximum duty cycle output
CMOS process greatly reduces the operating
Over temperature protection, OTP
current compared with similar products.
Internal Under Voltage Lock Out, UVLO
Totem Pole Output
SOP-8 package
Pin Configuration

1 8
VDD OUT Applications
2 7 Backlight for LED Panels
EA GN D
Portable Device Backlighting
3 6
CMP FREQ LCD Display Module
4 5
IN N OCP

Typical Application Circuit


VIN

VDD 1 8
VDD OUT
EA 2 7
EA GND
3 6
CM P FR EQ
4 5
IN N OCP

Confidential material for authorized user only and BiTEK www.BiTEK.com.tw


reserves the utmost right upon the information contained herein.

You might also like