Scribd
Upload
414 views4 pages

Which Two Benefits Are Provided by Creating VLANs

The document contains 5 multiple choice questions about VLANs (virtual local area networks). VLANs provide segmentation (question 1) and a router is needed to allow communication between VLANs (question 2). Collision domain issues can be caused by duplex mismatches or multiple interface errors (question 3). Advantages of VLANs include allowing access based on department, simplifying network changes, and establishing broadcast domains (question 4). If a VLAN is not configured on a switch, setting the access VLAN command will add it to the VLAN database file (question 5).

Uploaded by

mas muk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
414 views4 pages

Which Two Benefits Are Provided by Creating VLANs

The document contains 5 multiple choice questions about VLANs (virtual local area networks). VLANs provide segmentation (question 1) and a router is needed to allow communication between VLANs (question 2). Collision domain issues can be caused by duplex mismatches or multiple interface errors (question 3). Advantages of VLANs include allowing access based on department, simplifying network changes, and establishing broadcast domains (question 4). If a VLAN is not configured on a switch, setting the access VLAN command will add it to the VLAN database file (question 5).

Uploaded by

mas muk
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 4

Name :

VLAN Questions
1. Which two benefits are provided by creating VLANs? (Choose two)
a. Dedicated bandwidth
b. Allows switches to route traffic between subinterfaces
c. Provides segmentation
d. Added security
e. Contains collisions

2. On corporate network, hosts on the same VLAN can communicate with each other, but
they are unable to communicate with hosts on different VLANs. What is needed to allow
communication between the VLANs?

a. A switch with an access link that is configured between the switches


b. A router with subinterfaces configured on the physical interface that is connected to
the switch
c. A router with an IP address on the physical interface connected to the switch
d. A switch with a trunk link that is configured between the switches

3. Which two circumstances can cause collision domain issues on VLAN domain? (Choose
two)
a. Duplex mismatches on Ethernet segments in the same VLAN
b. Multiple errors on switchport interfaces
c. Congestion on the switch inband path
d. a failing NIC in an end device
e. an overloaded shared segment

4. What are three advantages of VLANs? (Choose three)


a. They allow access to network services based on department, not physical location
b. They provide a method of conserving IP addresses in large networks
c. They utilize packet filtering to enhance network security
d. They can simplify adding, moving, or changing hosts on the network
e. They provide a low-latency internetworking alternative to routed networks
f. They establish broadcast domains in switched networks
Name :

VLAN Questions

5. VLAN 3 is not yet configured on your switch. What happens if you set the switchport
access vlan 3 command interface configuration mode?
a. The command is accepted and the respective VLAN is added to vlan.dat
b. The command is rejected
c. The port turns amber
d. The command is accepted and you must configure the VLAN manually
Name :

ANSWER KEY
VLAN Questions
1. Which two benefits are provided by creating VLANs? (Choose two)
a. Dedicated bandwidth
b. Allows switches to route traffic between subinterfaces
c. Provides segmentation
d. Added security
e. Contains collisions

2. On corporate network, hosts on the same VLAN can communicate with each other, but
they are unable to communicate with hosts on different VLANs. What is needed to allow
communication between the VLANs?

a. A switch with an access link that is configured between the switches


b. A router with subinterfaces configured on the physical interface that is
connected to the switch
c. A router with an IP address on the physical interface connected to the switch
d. A switch with a trunk link that is configured between the switches

3. Which two circumstances can cause collision domain issues on VLAN domain? (Choose
two)
a. Duplex mismatches on Ethernet segments in the same VLAN
b. Multiple errors on switchport interfaces
c. Congestion on the switch inband path
d. a failing NIC in an end device
e. an overloaded shared segment

4. What are three advantages of VLANs? (Choose three)


a. They allow access to network services based on department, not physical
location
b. They provide a method of conserving IP addresses in large networks
c. They utilize packet filtering to enhance network security
d. They can simplify adding, moving, or changing hosts on the network
e. They provide a low-latency internetworking alternative to routed networks
f. They establish broadcast domains in switched networks
Name :

VLAN Questions

5. VLAN 3 is not yet configured on your switch. What happens if you set the switchport
access vlan 3 command interface configuration mode?
a. The command is accepted and the respective VLAN is added to
vlan.dat
b. The command is rejected
c. The port turns amber
d. The command is accepted and you must configure the VLAN manually

You might also like