1

United Electric Controls

• Differential Pressure Switch
• Pressure Switch
United Electric Controls | Featured Products Page 1 of 10

120 Series

l Specifications
l Approvals
l Model Charts
l Dimensions
l Options

Specifications

Storage temperature: -65 to 160°F (-54 to 71°C)

Ambient temperature -58 to 160°F (-50 to 71°C); models 36-39, 520-525, 701-705: 0 to 160°F(-17
limits: to 71°C); set point typically shifts less than 1% of range for a 50°F (28°C)
ambient temperature change; less than 2% for types E121& E122
Set point repeatability Temperature models: ±1% of adjustable range
United Electric Controls | Featured Products Page 2 of 10

Pressure models 50-55, S50B-S55B, 126-164, S126B-S164B, 171-174, 270-

274, 358-376, 520-535, 560-564, 701-705: ±1% of adjustable range; models
450-559: ±1/2% of adjustable range; models 36-39, 183-194, 483-494, 565-
567, 612-680: ±1 1/2% of adjustable range
Shock: Set point repeats after 15 G, 10 millisecond duration
Vibration: Set point repeats after 2.5 G, 5-500 Hz
Enclosure: Die cast aluminum (max. 0.4% copper), epoxy powder coated; gasketed;
internal set point lock standard on types J, C, F; gasketed aluminum tamper-
resistant dial cover on types B, H, E; aluminum nameplate
Enclosure Complies with NEMA 4X; 7; 9; IP66 requirements
classification:
Switch output: One or two SPDT; dual switch may be separated up to 100% of range;
switches may be wired "normally open" or "normally closed"
Electrical rating: 15 amps 125/250/480 VAC resistive
Reference scales: Types B, E & H: external scale; type J: internal reference scale
Weight: 3-8 lbs. Varies with model
Electrical connection: 3/4" NPT; terminal block standard
Pressure connection: Models S50B-S55B, S126B-S164B, 171-194, 483-494, 520-535: 1/2" NPTF;
models 560-564: 2" sanitary connection; models 565-567: 1 1/2" sanitary
connection; all others: 1/4" NPTF
Temperature Bulb and capillary: 6 feet 304 stainless steel;
assembly: Immersion stem: nickel-plated brass (standard length only); 316L stainless
steel optional
Fill: Model 1BS: solvent filled; models 2BS-8BS: non-toxic oil filled
Temperature Type F: typically 1%; type B, C, and E: typically 2% of range under laboratory
deadband: conditions (70°F [21°C] ambient circulating bath at rate of 1/2°F per minute
change)
Heat tracing or Freeze Switches designed for heat tracing and freeze protection are available for
protection: types B121 and E121; specifications are the same as above except: types
B121-13272, B122-13322 have electrical rating 22 amps/480 VAC; types
E121-1327, E122-13321 have 10 foot stainless steel capillary and 22
amps/480 VAC switch
Differential pressure Differential pressure indication available types H121K and H122K with
indicator (option indicator (option M210); accuracy approximately 1 1/2% mid 50% of range,
M210): 3% at ends; window is plexiglass and gasketed; indicator may be field
United Electric Controls | Featured Products Page 3 of 10

adjusted for approximately 1% accuracy at any set point within range

Back to top

Approvals
Class I, Division 1 & 2, Groups B,C,D;
Class II, Division 1 & 2, Groups E,F,G;
Class III

UL listed
Temperature: UL 873, file # E43374
UL 1203, file # E43374
Pressure: UL 508, file # E40857
UL 698, file # E40857

CSA Certified
Temperature: CSA C22.2 no. 24,
file # LR7814;
CSA C22.2 no. 25, file # LR7814
CSA C22.2 no. 30, file # LR7814
Pressure: CSA C22.2 no. 14,
file # LR39690;
CSA C22.2 no. 25, file # LR39690
CSA C22.2 no. 30, file # LR39690

CENELEC flame proof construction

per EEx d IIC T6, IP66 EN 50 014/50 018
(Specify Option "Q")

SAA Ex d IIC T6, IP66, Class 1, Zone 1

AS 2380.2 and AS 1939
(Available from UE Australia; specify Option M416)

Compliance to NACE MR-0175

(Not available with all models, see Option M411 for availability)
United Electric Controls | Featured Products Page 4 of 10

FM Approved, Class 3615 and 3600

(Not available with all models, see Option M415 for availability)

Back to top

Model Charts
Pressure Model Charts

Products listed below represet a sampling of our most popular 120 Series products. For complete
information, request a copy of our Process Measurements and Control Catalog.

Type J120
Model Adjustable Set Point Range Deadband Over Range Proof Pressure
Low end of range on fall; Pressure
High end of range on rise
"WC mBar "WC mBar psi Bar psi Bar
Buna N diaphragm and O-ring with 1/2" NPTF epoxy coated aluminum pressure connection
520 300 VAC to -742,24 to 0 0.2 to 8 0,50 to 19,90 200 13,8 400 27,58
0
521 10 VAC to -24,91 to 24,91 0.1 to 0.6 0,25 to 1,49 200 13,8 400 27,58
10
522 50 VAC to -124,54 to 124,54 0.1 to 3 0,25 to 7,47 200 13,8 400 27,58
50
523 0.5 to 5 1,25 to 12,45 0.1 to 0.3 0,25 to 0,75 200 13,8 400 27,58
524 2.5 to 50 6,23 to 124,54 0.1 to 0.8 0,25 to 1,99 200 13,8 400 27,58
525 10 to 250 24,91 to 622,70 0.1 to 6 0,25 to 14,94 200 13,8 400 27,58
Welded 316L stainless steel diaphragm with 1/2" NPTF 316L stainless steel pressure connection, large
0.72" orifice for clean-out purposes
171 1 to 20 0,07 to 1,38 0.1 to 1 0,0007 to 0,07 300 20,7 500 34
172 2 to 50 0,14 to 3,45 0.1 to 1.5 0,0007 to 0,10 300 20,7 500 34
173 4 to 100 0,28 to 6,90 0.1 to 2.5 0,0007 to 0,17 300 20,7 500 34
United Electric Controls | Featured Products Page 5 of 10

174 8 to 200 0,56 to 13,79 0.1 to 3.5 0,0007 to 0,24 300 20,7 500 34

Model Stock Adjustable Set Deadband Over Range Proof Pressure

Number Point Range Pressure
Low end of range
on fall;
High end of range
on rise
psi Bar psi Bar psi Bar psi Bar
Welded 316L stainless steel bellows with 1/2" NPTF pressure connection
S126B 30 to 3" -1 to 0.2 to 0.6" Hg 0,0007 to 3" Hg -0,10 30" Hg -1,02 &
Hg Vac 1,38 0,02 Vac Vac & 5 0,34
psi
S134B 30 Hg Vac -1 to 0.2 to 0.6" Hg 0,0007 to 20 1,38 25 1,72
to 20 psi 1,38 0,02
S137B 15 to 0,04 to 2 to 6" WC 0,0005 to 80" 0,19 5 0,34
80"WC 0,19 0,015 WC
S144b 0.5 to 20 0,04 to 0.1 to 0.3 0,0007 to 20 1,38 25 1,72
1,38 0,021
S152B 1 to 50 0,07 to 0.1 to 0.5 0,0007 to 50 3,45 75 5,17
3,45 0,03
S156B 2 to 100 0,14 to 0.2 to 0.6 0,014 to 100 6,90 125 8,62
6,90 0,04
S164B 4 to 200 0,28 to 0.2 to 1 0,014 to 200 13,79 200 13,79
13,79 0,07
Lower Top 25% Lower 75%
75% range range range span
span span
Welded 316 stainless steel psi psi Bar
diaphragm with 1/2" NPTF pressure
connection, 0.72"
190 9982 5 to 30 0,34 to 1 to 3 6 max 0,07 to 1500 103 2500 172
2,07 0,21
191 9994 10 to 100 0,69 to 1 to 8 15 max 0,07 to 1500 103 2500 172
United Electric Controls | Featured Products Page 6 of 10

6,90 0,55
192 95743 15 to 300 1,03 to 3 to 18 25 max 0,21 to 1500 103 2500 172
20,68 1,24
193 9995 20 to 500 1,38 to 4 to 30 45 max 0,28 to 1500 103 2500 172
34,48 2,07
194 9998 80 to 5,52 to 5 to 120 150 max 0,34 to 2000 138 2500 172
1700 117 8,27
303 stainless steel piston with Buna-N O-ring and 1/4" NPTF pressure connection (not recommended
for gas service since drying of the O-ring seal can allow bleeding of medium into the atmosphere)
612 9886 125 to 8,62 to 40 to 250 2,76 to 6000 414 10000 689
3000 206 17,24
616 700 to 48,27 40 to 375 2,76 to 6000 414 10000 689
5000 to 344 25,86
Buna-N diaphragm O-ring with 1/4" NPTF nickel plated brass pressure connection; Optional Viton
diaphragm and O-ring available
701 9956 1.5 to 30 0,10 to 1 to 2 0,07 to 500 34,48 1000 68,95
2,07 0,14
702 3 to 100 0,21 to 1 to 4 0,07 to 500 34,48 1000 68,95
6,90 0,28
703 9 to 300 0,62 to 1 to 5 0,07 to 500 34,48 1000 68,95
20,68 0,34
704 15 to 500 1,03 to 2 to 8 0,14 to 1500 103 2500 172
34,48 0,55
705 30 to 2,07 to 3 to 20 0,21 to 1500 103 2500 172
1000 68,95 1,38
706 100 to 6,9 to 10 to 30 0,69 to 2000 137 2500 172
1700 117 2,07

Types H121/H122
Model Adjustable Set Point Deadband Proof Pressure Dial
Range Divisions
Low end of range on fall;
High end of range on
rise
psi Bar psi Bar psi Bar psi
United Electric Controls | Featured Products Page 7 of 10

Welded 316 stainless steel bellows with 1/2" NPTF pressure connection
S126B 30" Hg Vac -1,02 to 0 0.2 to 0,007 to 30" Hg Vac -1,02 7amp; 0.5" Hg
to 0 psi 0.9" Hg 0,03 & 5 psi 0,34
S134B 30" Hg Vac -1,02 to 0.2 to 0,007 to 25 1,72 1" Hg &
to 20 psi 1,38 1.2" Hg 0,04 0.5 psi
S137B 2 to 80" WC 0,005 to 2 to 10" 0,005 to 5 0,34 2" WC
0,19 WC 0,02
S144B 0 to 20 0 to 1,38 0.1 to 0.5 0,007 to 25 1,72 0.5
0,03
S146B 0 to 30 0 to 2,07 0.1 to 0.6 0,007 to 40 2,76 0.5
0,04
S156B 0 to 100 0 to 6,90 0.2 to 0.8 0,014 to 125 8,62 2
0,06
S164B 0 to 200 0 to 13,79 0.3 to 2 0,021 to 200 13,79 5
0,14
Buna-N diaphragm, O-ring with 1/4" NPTF nickel plated brass pressure connection; Optional Viton
diaphragm O-ring available models 701-703
701 3 to 30 0,21 to 1 to 3 0,07 to 1000 68,95 0.5"
2,07 0,1
702 10 to 100 0,69 to 1 to 5 0,07 to 1000 68,95 2
6,90 0,17
703 30 to 300 2,07 to 2 to 7 0,14 to 1000 68,95 10
20,69 0,02
704 50 to 500 3,45 to 3 to 12 0,21 to 2500 172 10
34,48 0,83
705 200 to 1000 13,79 to 5 to 25 0,34 to 2500 172 25
68,95 1,38

Differential Pressure Model Charts

Type J120K
Model Adjustable Set Point Deadband Working Proof
Range Pressure Pressure
Low end of range on
fall;
High end of range on
United Electric Controls | Featured Products Page 8 of 10

rise
psid Bar psi Bar psi Bar psi Bar
316 stainless steel bellows with 1/2" NPTF pressure connection
S147B 3 to 30 0,21 to
2,07
S157B 10 to 100 0,69 to
6,90
Buna-N diaphragm , O-ring with 1/4" NPTF 303 stainless steel pressure connection
36 3 to 30 0,21 to 1 to 5 0,07 to 0 to 350 0 to 1000 68,95
2,07 0,34 24,13
37 10 to 100 0,69 to 2 to 8 0,14 to 0 to 500 0 to 1000 68,95
6,90 0,56 34,48
38 30 to 300 2,07 to 2 to 15 0,14 to 0 to 1000 0 to 2500 172
20,69 1,05 68,95
39 50 to 500 3,45 to 3 to 20 0,21 to 0 to 1000 0 to 2500 172
34,48 1,40 68,95
Buna-N diaphragm, O-ring with 1/4" NPTF aluminum pressure connection
455 5 to 80" 0,005 to 1 to 4" 0,002 to 30" Hg Vac to -1 to 225 15,51
WCD 0,20 WC 0,01 255 psi 15,52
456 2 to 20 0,01 to 0.05 to 0,03 to 30" Hg Vac to -1 to 225 15,51
1,38 0.2 0,01 255 psi 15,51
457 3 to 30 0,02 to 0.05 to 0,03 to 30" Hg Vac to -1 to 225 15,51
2,07 0.3 0,02 255 psi 15,51

Temperature Model Charts

Model Adjustable Set Max. Scale Stem Size/Finish

Point Range Temp. Div.
°F °C °F °C °F °C OD x Length
Types B121/B122/C120
120 0 to 255 -17.7 to 275 135 5 3 9/16" x 1 7/8" Below Thread Nickel Plated
105 Brass Std length only
121 200 to 95 to 215 475 245 5 3 9/16" x 1 7/8" Below Thread Nickel Plated
United Electric Controls | Featured Products Page 9 of 10

425 Brass Std length only

HTFP (Freeze 15 to -10 to 60 160 71 9/16" x 2 11/16" Below head Stainless steel
Protection) 140
Types E121/E122
2BSA -120 to -85 to 35 150 65 5 3 3/8 x 2 5/8"
100
2BSB 30 to 0 to 120 300 150 5 5 3/8 x 2 5/8"
250
3BS 100 to 35 to 200 450 230 5 5 3/8 x 2 1/8"
400
4BS 25 to -5 to 35 150 65 2 1 3/8 x 6 3/4"
100
5BS -20 to 80 -30 to 25 130 55 2 2 3/8 x 5"
8BS 350 to 175 to 690 365 5 5 3/8 x 3 1/4"
640 335
HTFP (Heat Tracing) 25 to -5 to 163 360 182 1/4 x 10 1/4"
325
Type F120
1BS -180 to -115 to 170 75 3/8 x 3 3/4"
120 50
2BS -125 to -85 to 400 200 3/8 x 2 5/8"
350 175
3BS -125 to -85 to 550 285 3/8 x 2 1/8"
500 260
4BS -40 to -40 to 50 170 75 3/8 x 6 3/4"
120
5BS -40 to -40 to 80 230 110 3/8 x 5"
180
6BS 0 to 250 -17.7 to 300 145 3/8 x 4 1/2"
120
7BS 0 to 400 -17.7 to 450 230 3/8 x 3"
200
8BS 50 to 10 to 340 700 370 3/8 x 3 1/4"
650

Back to top
United Electric Controls | Featured Products Page 10 of 10

Options
Many switch and sensor options are available. Request a copy of our Process Measurement and Control
Catalog for a complete list of availability.

Back to top

Web Copyright Notice | Web Legal Notice | Terms & Conditions

Home | Company | What's New | Products | Contact Us | Distributor Locator | Site/Search Map

180 Dexter Avenue © 2004 - 2001 United Electric Controls Co.

P.O Box 9143 Design by Web Designs by Caz
Watertown, MA 02471-9143 USA [email protected]
Tel: (617) 926-1000