Pro-Watch ™

Installation Guide
Release 4.5

June 2018 © 2018 Honeywell, Inc. 7-901073V14

 Copyright © 2018 Honeywell. All rights reserved.

Pro-Watch name and logo are registered trademarks of Honeywell. All other
product and brand names are the service marks, trademarks, registered
trademarks, or registered service marks of their respective owners. Printed in the
United States of America. Honeywell reserves the right to change any information
in this document at any time without prior notice.
Microsoft and Windows are registered trademarks of Microsoft Corporation.
Windows Server is a trademark of Microsoft Corporation.

Ordering Information

Please contact your local Honeywell Access Systems representative or visit us on

the web at http://www.honeywellintegrated.com/ for information about ordering.

Feedback

Honeywell Access Systems appreciates your comments about this manual. Please
visit us on the web at http://www.honeywellintegrated.com/ to post your
comments.

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14

ii www.honeywell.com
Chapter 1 Preface
1.1 Purpose of this Document............................................................................ 2
1.2 Audience ............................................................................................................... 2

1.3 Pro-Watch Documentation Set .................................................................. 2

1.4 Compliance ......................................................................................................... 2

Chapter 2 Pro-Watch 4.5 Installation

2.1 Overview ............................................................................................................... 4
2.1.1
Remote Data Installation ....................................................................................... 4
2.1.2
1.5 GB Free Space Requirement ........................................................................ 4
2.1.3
Install Windows Update "KB2919355"............................................................ 4
2.1.4
Recommended Screen Resolution and Size ................................................ 4
2.2 Installing .Net Framework 4.5..................................................................... 4
2.3 Runtime Requirements .................................................................................. 6
2.4 Supported Operating Systems ................................................................... 7
2.5 Supported Database Systems .................................................................... 7
2.6 Pro-Watch Software Suite Installation ................................................... 7
2.6.1 Installing Pro-Watch - Preliminary Steps ...................................................... 8
2.6.2 Installation Steps .................................................................................................... 10
2.7 Complete Installation ................................................................................... 11
2.8 Server-Only Installation .............................................................................. 16
2.9 Client (Complete) Installation .................................................................. 17
2.10 Terminal Client Installation .................................................................... 21
2.11 Database Only Installation ...................................................................... 22
2.12 Custom Installation .................................................................................... 24
2.13 Installing Pro-Watch - Final Steps ...................................................... 25
2.14 Upgrade Installation Process ................................................................. 29
2.15 Pro-Watch 4.5 product upgrade with SoftKey License .............. 33
2.16 Silent Installation ........................................................................................ 33
2.16.1 Creating a Log File .............................................................................................. 33
2.16.2 Command Line Parameters for Pro-Watch Suite Installation ...... 33
2.16.3 Command Line Parameters for Pro-Watch Patch Installation .... 37

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 iii

iv www.honeywell.com
Preface

In this preface...
Purpose of this Document

Audience

Pro-Watch Documentation Set

Compliance

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 1

1.1 Purpose of this Document
The Pro-Watch Software Suite Installation Guide provides the procedures and information neces-
sary to install Release 4.5 of the Pro-Watch access control system.

Microsoft Windows Server 2008, 2012 or 2016 is recommended for the Pro-Watch Server. Micro-
soft Windows 7, Windows 8.1, or higher is recommended for the Pro-Watch Client.

1.2 Audience
This guide is written for the Pro-Watch system administrator who installs the Pro-Watch software
on local machines.

1.3 Pro-Watch Documentation Set

The Pro-Watch Software Suite documentation set includes the following manuals:
• Pro-Watch Software Suite Guide in Portable Data File (PDF) format and as an Hypertext
Markup Language (HTML) online help file accessed from the software.
• Pro-Watch Software Suite Quick Reference Guide in PDF format.
• Pro-Watch Software Suite Installation Guide in PDF format.
• Pro-Watch Software Suite Release Notes, Release 4.5.

1.4 Compliance
To obtain applicable EU compliance Declaration of Conformities for this product, please refer to
our website, http://www.security.honeywell.com/hsce/international/index.html.
For any additional information regarding the compliance of this product to any EU-specific
requirements, please contact:

Honeywell Security & Communications

Honeywell Security - Quality Assurance Dept., Newhouse Industrial Estate
Motherwell
Lanarkshire ML1 5SB
Scotland
United Kingdom
Tel: +44(0) 1698 738200
Email: [email protected]

2 www.honeywell.com
Pro-Watch 4.5 Installation

In this chapter...

Overview
Installing .Net Framework 4.5
Runtime Requirements
Supported Operating Systems
Supported Database Systems
Pro-Watch Software Suite Installation
Complete Installation
Server-Only Installation
Client (Complete) Installation
Terminal Client Installation
Database Only Installation
Custom Installation
Installing Pro-Watch - Final Steps
Upgrade Installation Process
Pro-Watch 4.5 product upgrade with SoftKey License
Silent Installation

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 3

Overview
Remote Data Installation

2.1 Overview
This guide documents the installation of the Pro-Watch 4.5 software. Note that after you install
this software, you will also need to complete the Pro-Watch licensing procedure documented in
the Pro-Watch 4.5 Software Keys Guide 800-08123V14.

2.1.1 Remote Data Installation

For instructions on remote data installation, please see Disk 2 that was delivered with your Pro-
Watch installation package.

2.1.2 1.5 GB Free Space Requirement

Caution: If the C:\ drive contains less than the recommended 1.5 GB of free space,
there is no guarantee that the Pro-Watch installation will be successful.

If Pro-Watch is installed on a drive other than the C:\ drive, Pro-Watch still requires at least 1.5
GB of free space for temporary file storage.

2.1.3 Install Windows Update "KB2919355"

Pro-Watch 4.5 supports SQL 2016. But for SQL 2016 to work properly, you need to make sure that
the Windows update "KB2919355" is available and installed to the same system where SQL 2016
is installed.

2.1.4 Recommended Screen Resolution and Size

• Screen resolution: 1280 x 1024 pixels and higher.
• Monitor size: 17 inches and higher.

2.2 Installing .Net Framework 4.5

To install the .Net Framework 4.5, perform the following steps:
1. Double-click the dotNet 4.5 setup.exe icon to display the NET Framework 4.5 Setup
welcome wizard screen.

4 www.honeywell.com
 Installing .Net Framework 4.5
Recommended Screen Resolution and Size

Figure 2-1: .NET Framework 4.5 Setup Welcome Wizard

2. Select the I have read and accept the license terms check box and then click Install to
display Installation Progress screen.

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 5

Runtime Requirements
Recommended Screen Resolution and Size

Figure 2-2: .NET Framework 4.5 Installation Progress Screen

The installation screen displays a status bar showing the progress of the installation. The process
takes several minutes. When the installation process is finished the wizard displays the Installa-
tion Complete screen.
3. Click Finish to complete the installation.

2.3 Runtime Requirements

Pro-Watch (PW) Software Suite 4.5 requires:
• Microsoft .NET Framework 4.5 (32-bit required)
• Microsoft Windows Installer 4.5
• Microsoft Windows PowerShell 1.0
Caution: Ensure that these required components are present on the local system; if
they are not, you must install them before continuing with the rest of the Pro-
Watch installation.
Note: The setup file and installation instructions in this guide are valid only for Pro-Watch Version
4.5 or greater. Pro-Watch Software Suite Release 3.81 or greater must be already installed if you
are upgrading to Release 4.5.

6 www.honeywell.com
 Supported Operating Systems
Recommended Screen Resolution and Size

2.4 Supported Operating Systems

Supported operating systems for Pro-Watch Server:
• Windows 7 Professional or higher
• Windows 8/8.1 Professional or higher
• Windows 10
• Windows Server 2008/2008 R2
• Windows Server 2012/2012 R2
• Windows Server 2016
Note: Pro-Watch no longer supports Windows NT 4.0, Windows 2000 Server, Windows 2003
Server, Vista, or Windows XP.

2.5 Supported Database Systems

Supported database systems for Pro-Watch Server:
• SQL Server 2012 Express or higher
• SQL Server 2014 Standard or higher
• SQL Server 2016 Express or higher - not supported on Windows 7
Note: Pro-Watch no longer supports SQL Server 2008 or below.

2.6 Pro-Watch Software Suite Installation

Notes:

• The installation is dependent on the feature check box selected in Installation

Wizard.
• Use of the full installer is not allowed when Pro-Watch is already installed. When the
users try to do that they get the an error message:

Below are the configuration options for installing a new instance of Pro-Watch Software Suite as
described in the section “Installing Pro-Watch - Preliminary Steps“ on page 8.
• Complete Pro-Watch Installation – Installs all of the Pro-Watch components. Provides full
server and client functionality.
• Server-Only Pro-Watch Installation – Installs only the Pro-Watch Server and configures the
database.
Note: Configuring the Pro-Watch database involves either installing a new database or
upgrading a pre-existing database to function with this version of Pro-Watch.
• Pro-Watch Client (Complete) – Installs only the Pro-Watch client applications.
• Pro-Watch Terminal Client – Installs only the Pro-Watch client terminal application.
• Pro-Watch Database Only – Configures the Pro-Watch database.

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 7

Pro-Watch Software Suite Installation
Installing Pro-Watch - Preliminary Steps

Note: Configuring the Pro-Watch database involves either installing a new database or
upgrading a pre-existing database to function with this version of Pro-Watch.
• Custom Pro-Watch Installation – Allows the installation of Pro-Watch components custom
selected from a list.
Note: The Custom Pro-Watch Installation option should only be used by advanced users
who understand what components of Pro-Watch are compatible with one another.
In addition to all the above types, there is also a process to upgrade an existing version of Pro-
Watch. This is described separately in the section “Upgrade Installation Process“ on page 29.

2.6.1 Installing Pro-Watch - Preliminary Steps

1. Double-click the Pro-Watch Installation Wizard icon to display the Pro-Watch Setup
Wizard welcome page:

Figure 2-3: Welcome Screen

8 www.honeywell.com
 Pro-Watch Software Suite Installation
Installing Pro-Watch - Preliminary Steps

2. Click Next to display the Pro-Watch License Agreement screen:

Figure 2-4: End User License Agreement (EULA)

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 9

Pro-Watch Software Suite Installation
Installation Steps

3. Click the radio button to confirm agreement with the licensing terms and click Next to
display the feature installation screen.
4. Select the Pro-Watch Software Suite check-box

Explanation of Features
Select the appropriate check box for the available feature installation choices described in the
table below:

Table 1: Feature Installation Options

Feature
Installation Description
Options

To install Pro- If you want to install Pro-Watch Software Suite:

Watch Software Install the Pro-Watch Software Suite based on your
Suite configuration selections as described in “Select an
Option Button“ on page 11 and
Refer sections 2.11 Complete Installation to 2.16
Custom Installation.

2.6.2 Installation Steps

If you have selected the Pro-Watch Software Suite check box (see Figure 3 on page 10) then
continue the steps below and refer the sections 2.11 Complete Installation to 2.16 Custom
Installation for Pro-Watch Software Suite installation.
1. Select the Pro-Watch Software Suite check box and then click Next to display the Pro-
Watch Configurations screen:

Figure 2-5: Configuration Options

10 www.honeywell.com
 Complete Installation
Installation Steps

Select an Option Button

2. Select the appropriate option button to select one the available installation configuration
choices described in the table below:
Table 2: Installation Options

Installation Option Description

“Complete Installs all of the Pro-Watch components and

Installation“ on page provides full server and client functionality.
11 We recommend that you administer Pro-
Watch from the same local machine.

“Server-Only Installs only the Pro-Watch Server and

Installation“ on page configures the Pro-Watch database.
16

“Client (Complete) Installs only the Pro-Watch client

Installation“ on page applications, the most common installation
17 type when the server components are not
needed.

“Terminal Client Installs only the Pro-Watch terminal client

Installation“ on page application. This configuration allows a user
21 to use a local camera while using Pro-Watch
through Remote Desktop or Microsoft
Terminal Server Client.

“Database Only Configures the Pro-Watch database. This

Installation“ on page option allows you to install or upgrade a Pro-
22 Watch database without actually installing
Pro-Watch.

“Custom Installation“ Allows the installation of individual Pro-

on page 24 Watch components (advanced users only).

3. After you select the desired configuration option, in the Select SQL Version field select the
version that matches your version and click Next to display the first screen for the
installation process you have chosen.
Note: To install Pro-Watch to a folder other than the default, click Browse and select an appropriate
folder.

2.7 Complete Installation

1. Complete the “Installing Pro-Watch - Preliminary Steps“ on page 8.
2. Select the Complete Pro-Watch Installation option button as explained in the section
“Select an Option Button“ on page 11.

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 11

Complete Installation
Installation Steps

Figure 2-6: Complete Installation Selection

3. Select from the drop-down list the SQL version running on your machine.

Note: If you do not have any version of SQL installed, a message will appear offering to
install SQL Express 2016. Click OK to install SQL Express 2016.

To change the installation path, click Browse to find and redefine the path.
Note: If you want to upgrade the existing Pro-Watch database, select the Upgrade Database check
box.

12 www.honeywell.com
 Complete Installation
Installation Steps

4. Click Next to display the Configure Pro-Watch Server screen.

Figure 2-7: Configure Pro-Watch Server screen

5. Select the Logon Type from the drop-down list.

6. Enter your user name.
7. Select the Domain Name from the drop-down list.

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 13

Complete Installation
Installation Steps

8. Enter the correct Password and click Next to display the Configure Pro-Watch Database
screen.

Figure 2-8: Configure Pro-Watch Database (Manual) Screen

Note: When you select SQL Express 2016 as your database, Pro-Watch displays a DOS
dialog box while the SQL DB is downloaded. Allow 5 to 10 minutes for the DOS dialog box
to display and do not close it before your system finishes with downloading the SQL DB.
9. For manual configuration, select the Manually Configure Database (Advanced Users
Only) check box, then type in the Database Server name and select the Instance Name
(that is, the Pro-Watch Database name) from the drop-down list. If the SQL server you want
to use is not in the list, type its name manually. When you have completed this
configuration screen, go to Step 8.
Caution: Manual configuration is recommended only for advanced users.
Note: In Figure 2-6 if you have selected Install SQL Express 2016 from the Select SQL
Version drop-down list, then the Instance Name drop-down in Figure 2-8 and Figure 2-9
will be a text box. A user can type the required instance name.

14 www.honeywell.com
 Complete Installation
Installation Steps

10.To use the local database server on your machine, select the Use Local Database Server
check box. This selection hides the Database Server field, select a instance name from the
Instance Name drop-down list.
Note: The name you enter for the service account at initial login is the account name that
will enable you to log in to Pro-Watch.

Figure 2-9: Pro-Watch Database (Local) Screen

11.Define the Database Path where Pro-Watch Database files (.ldf and.mdf file) is copied.
Click Browse to find and redefine the path.
12.Click Next to display the continuation of the Configure Pro-Watch Database screen where
you can create a new database.

Figure 2-10: Create New Database Screen

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 15

Server-Only Installation
Installation Steps

13.To configure an existing database, leave the check box blank and select a Pro-Watch
Database Name from the drop-down list
OR
Select the check box and type in the name of the new database that you’re creating.
Note: To install the sample reports, select the Install sample Reports check box OR leave
the check box blank.
14.Click Next to display the Ready to Install the Program screen and go to “Installing Pro-Watch
- Final Steps“ on page 25 to finish the installation process.

2.8 Server-Only Installation

The server-only installations do not include any client components.
1. Complete the “Installing Pro-Watch - Preliminary Steps“ on page 8.
2. Select the Server-Only Pro-Watch Installation option button as explained in the section
“Select an Option Button“ on page 11.
Note: If you want to upgrade the existing Pro-Watch database, select the Upgrade
Database check box.

Figure 2-11: Server-Only Selection

3. To change the installation path, click Browse to find and redefine the path.

16 www.honeywell.com
 Client (Complete) Installation
Installation Steps

4. Click Next to display the Configure Pro-Watch Server screen:

5. Click Next to display the Ready to Install the Program screen and go to “Installing Pro-
Watch - Final Steps“ on page 25 to finish the installation process:

2.9 Client (Complete) Installation

All Client installations include the following components:
• Alarm Monitor.
• Badge Builder.
• Map Builder.
• Registry Manager.
• Reports.

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 17

Client (Complete) Installation
Installation Steps

• Pro-Watch Client Application.

1. Complete the “Installing Pro-Watch - Preliminary Steps“ on page 8.
2. Select the Pro-Watch Client (Complete) option button as explained in the section “Select
an Option Button“ on page 11.

Figure 2-12: Client (Complete) Selection

Note: For Client (Complete) installation the Upgrade Database check box is not available.

18 www.honeywell.com
 Client (Complete) Installation
Installation Steps

3. Click Next to display the Configure Pro-Watch Client screen:

Figure 2-13: Configure Pro-Watch Client Screen

4. For automatic configuration, select a Pro-Watch Server from the drop-down list. Click
Refresh to refresh the server list. Pro-Watch populates the associated Database Server
name and the Pro-Watch Database Name in their respective fields.
Note: If the server you want to connect to is not in the list, or if the Pro-Watch Server is not
currently running on this server, you must either start it or use the manual configuration.
5. For manual configuration, select the Manually Configure Pro-Watch Client (Advanced
Users Only) check box. Select a Database Server from the drop-down list and enter the
Pro-Watch Database Name. If the server you want to use is not in the list, type its name
manually.
Caution: Manual configuration is recommended only for advanced users.
6. Click Next to display the Ready to Install the Program screen and go to “Installing Pro-
Watch - Final Steps“ on page 25 to finish the installation process.
Note: If the program displays the following error message during installation, be sure the
TCP/IP protocol is enabled in the SQL Server Network Configuration:

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 19

Client (Complete) Installation
Installation Steps

7. Run the SQL Server Configuration Manager.

8. Select SQL Server Network Configuration > Protocols for MSSQLSERVER to display the
related protocols.

20 www.honeywell.com
 Terminal Client Installation
Installation Steps

9. If the TCP/IP protocol is not enabled by default, double-click the TCP/IP option to display
its Properties screen:

10.For the Enabled field, select Yes from the drop-down list.
11.Click Apply and OK.
12.Stop, and then restart the MS SQL service to activate your changes.

2.10 Terminal Client Installation

1. Complete the “Installing Pro-Watch - Preliminary Steps“ on page 8.
2. Select the Pro-Watch Terminal Client option button as explained in the section “Select an
Option Button“ on page 11.

Figure 2-14: Terminal Client Selection

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 21

Database Only Installation
Installation Steps

Note: For Terminal Client installation the Upgrade Database check box is not available.
3. Click Next to display the Ready to Install the Program screen and go to “Installing Pro-
Watch - Final Steps“ on page 25 to finish the installation process.

2.11 Database Only Installation

1. Complete the “Installing Pro-Watch - Preliminary Steps“ on page 8.
2. Select the Pro-Watch Database Only option button as explained in the section “Select an
Option Button“ on page 11.

Figure 2-15: Database Only Selection

22 www.honeywell.com
 Database Only Installation
Installation Steps

3. In the Select SQL Version field, select the desired version of Microsoft SQL.
Note: If you want to upgrade the existing Pro-Watch database, select the Upgrade
Database check box.
4. Click Next to display the Configure Pro-Watch Database screen (Figure 2-8).
Note: When you select SQL Express 2016 as your database, Pro-Watch displays a DOS
dialog box while the SQL DB is downloaded. Allow 5 to 10 minutes for the DOS dialog box
to display and do not close it before your system finishes with downloading the SQL DB.
5. For manual configuration, select the Manually Configure Database (Advanced Users
Only) check box, then type in the Database Server name and select the Instance Name
(that is, the Pro-Watch Database name) from the drop-down list. If the SQL server you want
to use is not in the list, type its name manually.
Caution: Manual configuration is recommended only for the advanced users.
6. To use the local database server on your machine, select the Use Local Database Server
check box. (See Figure 2-9.) This selection disables the Database Server field, so you must
either type in a new database name or select a local database from the Instance Name
drop-down list.
7. Click Next to display the continuation of the Configure Pro-Watch Database screen
(Figure 2-10).
8. To configure an existing database, leave the check box blank and select a Pro-Watch
Database Name from the drop-down list
OR
To configure a new database, select the check box and type in the name of the new database. To
install the new Pro-Watch database to a folder on the SQL server other than the default one, click
Browse and select a new path.
9. Click Next to display the Ready to Install the Program screen. and go to “Installing Pro-
Watch - Final Steps“ on page 25 to finish the installation process.

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 23

Custom Installation
Installation Steps

2.12 Custom Installation

During both the server and client installations, both the client and server components can be cus-
tomized. The custom setup option enables you to install only a selected subset of the client and
server components.
1. Complete the “Installing Pro-Watch - Preliminary Steps“ on page 8.
2. Select the Custom Pro-Watch Installation option button explained in the section “Select
an Option Button“ on page 11.

Figure 2-16: Custom Installation Selection

3. Select from the drop-down list the SQL version running on your machine.
Note: When you select SQL Express 2016 as your database, Pro-Watch displays a DOS
dialog box while the SQL DB is downloaded. Allow 5 to 10 minutes for the DOS dialog box
to display and do not close it before your system finishes with downloading the SQL DB.
4. To change the installation path, click Browse to find and redefine the path.
Note: If you want to upgrade the existing Pro-Watch database, select the Upgrade
Database check box.

24 www.honeywell.com
 Installing Pro-Watch - Final Steps
Installation Steps

5. Click Next to display the Pro-Watch Custom Installation Options screen.

Figure 2-17: Custom Installation Options

6. In this step you choose which components to install. To modify how a component is
installed, click on the icon for that component to view the choices:

Figure 2-18: Feature Installation Options

7. Review the components and select the ones you want to install, and click Next.
8. The order of the remaining screens depends on your choices of components to install. If
you want to install a server (that is, you did not X it out), perform the steps listed in
“Complete Installation“ on page 11. If you do not want to install a server, mark it as
unavailable to be installed and click Next to display the Configure Pro-Watch Client screen
(Figure 2-13). Perform the steps in “Client (Complete) Installation“ on page 17 for the rest
of the procedure.
9. Go to “Installing Pro-Watch - Final Steps“ on page 25.

2.13 Installing Pro-Watch - Final Steps

1. The final steps begin on the Ready to Install the Program screen:

Figure 2-19: Ready to Install Pro-Watch screen

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 25

Installing Pro-Watch - Final Steps
Installation Steps

2. Click Install to display a status bar showing the progress of the installation.

Figure 2-20: Installation Status

The process takes several minutes.

3. When the installation process is finished, click Next to display the InstallShield Wizard
Complete screen.

26 www.honeywell.com
 Installing Pro-Watch - Final Steps
Installation Steps

Figure 2-21: Installation Completion Screen

4. Click Finish. A small pop-up informs you that you have to reboot the PC for the installation
to take effect.

Figure 2-22: Reboot Prompt

5. Click YES to restart your computer.

6. If you are running either the MS Windows 2008 or Windows Server 2012 operating system,
set the Pro-Watch Server service type to Automatic (Delayed Start):
a. From the system Control Panel, select Services to display the list of services installed
on the system.
b. From the list of services, right-click Pro-Watch Server and select Properties.

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 27

Installing Pro-Watch - Final Steps
Installation Steps

c. At the Pro-Watch Server Properties dialog box, select a Startup Type of Automatic
(Delayed Start), and click OK. This ensures that the Pro-Watch Server service starts
each time you start up Pro-Watch.

28 www.honeywell.com
 Upgrade Installation Process
Installation Steps

2.14 Upgrade Installation Process

A previous version of Pro-Watch Software Suite must be already installed before you begin this
procedure.
1. Before you begin to install the patch:
• Close out any Pro-Watch software that may be running.
• Be sure the ProWatchBridgeService service is not running.
2. Copy the patch executable onto your machine.
3. Double-click on the executable to display the Pro-Watch Setup Wizard Welcome screen.

Figure 2-23: Welcome Screen

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 29

Upgrade Installation Process
Installation Steps

30 www.honeywell.com
 Upgrade Installation Process
Installation Steps

4. Click Next to display the Start Installation screen.

If you are installing Pro-Watch Server, select the Apply Update to Database check box (if you are
installing Pro-Watch Client, the check box is grayed out).
5. Click Next to display the Installing screen.

Figure 2-24: Installing Patch Screen

The status bars display the progress of the installation.

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 31

Upgrade Installation Process
Installation Steps

6. When the installation is complete, the software automatically displays the message that
the installation is successful.

Figure 2-25: Successful Installation Message

7. Click Finish. A small pop-up informs you that you have to reboot the PC for the patch to
take effect.

Figure 2-26: Reboot Prompt

8. Click OK to restart your computer.

9. Manually start the Pro-Watch service. To do this, go to the Windows Control Panel, select
Administrative Tools, and select Services.

32 www.honeywell.com
 Pro-Watch 4.5 product upgrade with SoftKey License
Creating a Log File

START Button

10.At the Services screen, click the Start button to start the Pro-Watch Server service. Click OK
to exit.

2.15 Pro-Watch 4.5 product upgrade with SoftKey License

Please see Pro-Watch 4.5 Software Keys Guide 800-08123V14 for more information.

2.16 Silent Installation

NOTE: When using a Pro-Watch Silent Install to install a Pro-Watch Server, you must install the
Software Keys Manager and, if necessary, SQLExpress before installing Pro-Watch.

2.16.1 Creating a Log File

Silent installation creates a log file for the installer to review and verify the error or success of the
installation process.

Pro-Watch Suite installer creates the log files (ProWatch_Install_MSI_Log.txt, PW_<version>_In-

stall_Log_File.txt) under the %temp% folder.
Pro-Watch patch creates a log file (PWPatchInstall.txt) in the Pro-Watch folder.

2.16.2 Command Line Parameters for Pro-Watch Suite Installation

Here below are the command line parameters, values, and their descriptions used in silent installa-
tion of the Pro-Watch suite.

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 33

Silent Installation
Command Line Parameters for Pro-Watch Suite Installation

Table 3: Command Line Parameters for Pro-Watch Suite Silent Installation

Parameter Value (if any) Description

FEATUREGROUP 1 Complete Pro-Watch Installation
2 Server-Only Pro-Watch Installation
3 Pro-Watch Client (Complete)
4 Pro-Watch Terminal Client
5 Pro-Watch Database Only
6 Custom Pro-Watch Installation
SQLVERSIONCOMBO Microsoft SQL Server 2012
Microsoft SQL Server 2014
Microsoft SQL Server 2016
UPGRADEDB 1 Upgrade the Database
DATABASESERVERNAME Database Server Name
SERVICEUSERNAME Windows User name which will be set
as service logon account.
DOMAINNAME User domain name for service logon
account.
PASSWORD Service logon user account pass-
word.
LOCALDBCHECK 1
SERVERNAME SQL Server Name
INSTANCENAME SQL Instance Name
DBEXISTS 0
DATABASEBROWSEPATH Database installation path
INSTALLDIR Pro-Watch installation path
COMMSERVERNAME Communication server name
SERVERNAME_CLIENT SQL Server name for client installa-
tion
NEWPWDBCHECK 1
DBNAME PWNT Pro-Watch Database Name

Sample Installation Commands

Complete Pro-Watch Installation

"Pro-Watch Software Suite.exe" /S /V" PWSWSUITE="1" FEATUREGROUP="1" SQLVERSION-
COMBO=\"Microsoft SQL Server 2012\" DATABASESERVERNAME="<DB Server Name>" SERVI-
CEUSERNAME="<Windows User name>" DOMAINNAME="<Domain Name>"
PASSWORD="<Password>" LOCALDBCHECK="1" SERVERNAME="<SQL Server name>" INSTAN-
CENAME="<SQL Instance name>" DBEXISTS="0" DATABASEBROWSEPATH=\"c:\Program Files
(x86)\ProWatch\Database\" COMMSERVERNAME="<Comm server name>" SERVERNAME_CLI-

34 www.honeywell.com
 Silent Installation
Command Line Parameters for Pro-Watch Suite Installation

ENT="<SQL Server name>" NEWPWDBCHECK="1" DBNAME="PWNT" INSTALLDIR=\"c:\Program

Files (x86)\ProWatch\" /qn /norestart"

Server-Only Pro-Watch Installation

"Pro-Watch Software Suite.exe" /S /V" PWSWSUITE="1" FEATUREGROUP="2" SQLVERSION-
COMBO=\"Microsoft SQL Server 2012\" DATABASESERVERNAME="<DB Server Name>" SERVI-
CEUSERNAME="<Windows User name>" DOMAINNAME="<Domain Name>"
PASSWORD="<Password>" LOCALDBCHECK="1" SERVERNAME="<SQL Server name>" INSTAN-
CENAME="<SQL Instance name>" DBEXISTS="0" DATABASEBROWSEPATH=\"c:\Program Files
(x86)\ProWatch\Database\" COMMSERVERNAME="<Comm server name>" " SERVERNAME_CLI-
ENT="<SQL Server name>" NEWPWDBCHECK="1" DBNAME="PWNT" INSTALLDIR=\"c:\Program
Files (x86)\ProWatch\" /qn /norestart"

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 35

Silent Installation
Command Line Parameters for Pro-Watch Suite Installation

Pro-Watch Client (Complete) Installation

"Pro-Watch Software Suite.exe" /S /V" PWSWSUITE="1" DATABASESERVERNAME="<DB Server
Name>" FEATUREGROUP="3" COMMSERVERNAME="<Comm server name>" SERVERNAME_-
CLIENT="<SQL Server name>" DBNAME="PWNT" INSTALLDIR=\"c:\Program Files (x86)\Pro-
Watch\" /qn /norestart"

36 www.honeywell.com
 Silent Installation
Command Line Parameters for Pro-Watch Patch Installation

2.16.3 Command Line Parameters for Pro-Watch Patch Installation

Here below are the command line parameters, values, and their descriptions used in silent installa-
tion of a Pro-Watch patch.

Table 4: Command Line Parameters for Pro-Watch Suite Patch Silent Installation

Value (if
Parameter Description
any)
UPDATEDB Database update
INSTALLSAMPLEREPORTS Installing sample reports

Note: The above parameters are optional and case sensitive (all in capital letter). Users can pass
the parameter based on the feature they want to install. Only /S is mandatory for silent installation.

Sample Installation Command

PWPatchsetup.exe /S UPDATEDB INSTALLSAMPLEREPORTS
The above command will update the database and install sample reports.

Pro-Watch Software Suite 4.5 Installation Guide, Document 7-901073V14 37

Silent Installation
Command Line Parameters for Pro-Watch Patch Installation

38 www.honeywell.com
Honeywell
135 West Forest Hill Avenue
Oak Creek, WI 53154 Honeywell – Europe
(414) 766-1700 Ph Boeblingerstrasse 17 Specifications subject to change without notice.
(414) 766-1798 Fax 71101 Schonaich © Honeywell. All rights reserved.
www.honeywellintegrated.com Germany Document 7-901073V14