19/10/2017 X2CrNiMoN22-5-3 / 1.
4462 Austenitic-ferritic stainless steel - equivalent, chemical composition, properties
Steel Steel and Cast Iron Alloy Buy / Sell Worldwide About
Home Search
Numbers Standards Standards Product Equivalents Us
YOU HERE: Steel Numbers -> Number 1.44XX OR Steel & Cast Iron Standards -> / EN 10088-2 / EN 10088-3
/ EN 10028-7 / EN 10222-5 / EN 10216-5 / EN 10217-7 / EN 10296-2 / EN 10253-3 / EN 10253-4 / EN 10272 / EN
10263-5 / EN 10250-4 / EN 10297-2 / EN 10088-1 / EN 10088-5 / EN 10088-4
X2CrNiMoN22-5-3 ( 1.4462 )
Esterer Foundries - Your partner in casting
We cover the production from planning, production, processing to logistics esterer-
giesserei.de
Grade : X2CrNiMoN22-5-3
Number: 1.4462
Classification: Austenitic-ferritic stainless steel
Density: 7.8 g/cm ³
EN 10088-2: 2005 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion
resisting steels for general purposes
EN 10088-3: 2005 Stainless steels. Technical delivery conditions for semi-finished products, bars, rods,
wire, sections and bright products of corrosion resisting steels for general purposes
EN 10028-7: 2007 Flat products made of steels for pressure purposes. Stainless steels
EN 10222-5: 2000 Steel forgings for pressure purposes. Martensitic, austenitic and austenitic-ferritic
stainless steels
EN 10216-5: 2014 Seamless steel tubes for pressure purposes. Technical delivery conditions. Stainless
steel tubes
EN 10217-7: 2005 Welded steel tubes for pressure purposes. Stainless steel tubes
EN 10296-2: 2005 Welded circular steel tubes for mechanical and general engineering purposes.
Stainless steel. Technical delivery conditions
EN 10253-3: 2008 Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless
Standard: steels without specific inspection requirements
EN 10253-4: 2008 Butt-welding pipe fittings. Wrought austenitic and austenitic-ferritic (duplex) stainless
steels with specific inspection requirements
EN 10272: 2007 Stainless steel bars for pressure purposes
EN 10263-5: 2001 Steel rod, bars and wire for cold heading and cold extrusion. Technical delivery
conditions for stainless steels
EN 10250-4: 2000 Open steel die forgings for general engineering purposes. Stainless steels
EN 10297-2: 2005 Seamless circular steel tubes for mechanical and general engineering purposes.
Stainless steel. Technical delivery conditions
EN 10088-1: 2005 Stainless steels. List of stainless steels
EN 10088-5: 2009 Stainless steels. Technical delivery conditions for bars, rods, wire, sections and bright
products of corrosion resisting steels for construction purposes
EN 10088-4: 2009 Stainless steels. Technical delivery conditions for sheet/plate and strip of corrosion
resisting steels for construction purposes
Equivalent grades: Go here
AdChoices Steel Sheet Duplex Steel Steel Plate
Chemical composition % of steel X2CrNiMoN22-5-3 (1.4462): EN 10088-2-2005
Elements not listed in this table shall not be intentionally added to the steel without the agreement of the purchaser except for finishing
the cast.
C Si Mn Ni P S Cr Mo N
max 0.03 max 1 max 2 4.5 - 6.5 max 0.035 max 0.015 21 - 23 2.5 - 3.5 0.1 - 0.22
http://www.steelnumber.com/en/steel_composition_eu.php?name_id=136 1/3
19/10/2017 X2CrNiMoN22-5-3 / 1.4462 Austenitic-ferritic stainless steel - equivalent, chemical composition, properties
Mechanical properties of steel X2CrNiMoN22-5-3 (1.4462)
Rm - Tensile strength (MPa) (+A) 640-950
Rm - Tensile strength (MPa) (+AT) 640-920
Rm - Tensile strength (MPa) (+AT+C) 1000-1020
Rp0.2 0.2% proof strength (MPa) (+A) 450-500
Rp0.2 0.2% proof strength (MPa) (+AT) 450
+20° -40°
KV - Impact energy (J) transverse, (+A)
100 40
+20°
KV - Impact energy (J) longitud., (+A)
150
+20°
KV - Impact energy (J) longitud., (+AT)
120-200
+20° -196° -40°
KV - Impact energy (J) transverse, (+AT)
90-100 40 40
A - Min. elongation at fracture (%) (+A) 20-25
A - Min. elongation at fracture (%) transverse, (+AT) 22
A - Min. elongation at fracture (%) longitud., (+AT) 22-30
Nominal diameter (mm): 2 - 25
Z - Reduction in cross section on fracture (%) 50-55
Brinell hardness (HB): (+A) 270
Brinell hardness (HB): (+AT) 290
Properties of steel X2CrNiMoN22-5-3 (1.4462)
Resistance to intergranular corrosion: in the delivery condition - yes; in the sensitized condition - yes
Equivalent grades of steel X2CrNiMoN22-5-3 (1.4462)
Warning! Only for reference
EU USA France England Sweden
EN - AFNOR BS SS
X2CrNiMoN22-5-3 S32205 Z3CND22-05Az 318S13 2377
Start your free trial
Build sophisticated, large scale machine learning models that deliver
better insights cloud.google.com
NEW opportunities for buyers!
Post free buying requirement of steel X2CrNiMoN22-5-3 (1.4462)
http://www.steelnumber.com/en/steel_composition_eu.php?name_id=136 2/3
19/10/2017 X2CrNiMoN22-5-3 / 1.4462 Austenitic-ferritic stainless steel - equivalent, chemical composition, properties
Mechanical properties
ReH Minimum yield strength / Mindestwert der oberen Streckgrenze / Limite d elasticite minimale
Rm Tensile strength / Zugfestigkeit / Resistance a la traction
A Minimum elongation / Mindestwert der Bruchdehnung / Allongement minimal
J Notch impact test / Kerbschlagbiegeversuch / Essai de flexion par choc
Heat treatment conditions
+A Soft annealed +P Precipitation hardened
+AC Annealed to achieve spheroidization of the carbides +PE Peeled
+AR As rolled +QA Air quenched and tempered
+AT Solution annealed +QL Liquid quenched and tempered
+C Cold drawn / hard +QT Quenched and tempered
+CR Cold rolled +S Treated to improve shearability
+FP Treated to ferrite-pearlite structure and hardness range +SH As rolled and turned
+I Isothermal annealing +SR Cold drawn and stress relieved
+LC Cold drawn / soft +T Tempered
+M Thermo mechanical rolling +TH Treated to hardness range
+N Normalized +WW Warm worked
+NT Normalized and tempered +U Untreated
Austenitic-ferritic stainless steel
Chemical composition of steel X2CrNiMoN22-5-3 (1.4462), Standards of steel X2CrNiMoN22-5-3 (1.4462)
Mechanical Properties of steel X2CrNiMoN22-5-3 (1.4462) Equivalent grades of steel X2CrNiMoN22-5-3 (1.4462)
Tensile Strength, Elongation, Proof strength, Hardness
European Steel and Alloy Grades / Numbers Searchable Database © 2011- 2017 All rights reserved. About us. Contacts.
The contents from this Steel & Alloy Database may not be reproduced. The entire risk as to use of these content is assumed by you the
user
Google+ SteelNumber
http://www.steelnumber.com/en/steel_composition_eu.php?name_id=136 3/3
