Scribd
Upload
107 views

Reinforced Concrete Building Design: As Calculated Eurocode Table of Content

This document outlines the design criteria, materials, assumptions, and analysis steps for a reinforced concrete building according to both American and Eurocode standards. The building will be designed for dead and live loads, wind, seismic, and their combinations using STAAD Pro software. Reinforcement will be designed for beams, columns, and slabs according to Eurocode standards. Foundations will be designed according to specifications from the client.

Uploaded by

Shakira
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
107 views

Reinforced Concrete Building Design: As Calculated Eurocode Table of Content

This document outlines the design criteria, materials, assumptions, and analysis steps for a reinforced concrete building according to both American and Eurocode standards. The building will be designed for dead and live loads, wind, seismic, and their combinations using STAAD Pro software. Reinforcement will be designed for beams, columns, and slabs according to Eurocode standards. Foundations will be designed according to specifications from the client.

Uploaded by

Shakira
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

REINFORCED CONCRETE BUILDING DESIGN

TABLE OF CONTENT AS CALCULATED EUROCODE


1. GENERAL
1.1 SCOPE OF WORK

The calculation is made to explain the detail design of


Reinforced Concrete Building.

1.3 DESIGN CRITERIA

The listed are applicable codes, specifications, and EN 1990.2002:


Uniform Building Code
standard drawings: Eurocode 0: Basis of
1997 (UBC '97)
Structural Design

American Concrete EN 1992-1-1:


Institute 1995 (ACI Eurocode 2: Design of
318-95) Concrete Structures

Design Specification
for Civil and Structural

Civil Engineering
Standards, No.0504.05-
ES-40.XX

Specification For Civil


Work, No.0504.05-ES-
40.01
Architectural Materials
and Workmanship
Specification, No.0504.05-
ES-40.03

Wind and Earthquake EN 1991-1-4:2005:


Loading, No.0504.05- Eurocode 1: Actions on
ES-40.05 Structures - Wind actions
and EN 1998.1.2004:
Eurocode 8: Design of
structures for
earthquake resistance
Design of Concrete
EN 1992.1.1.2004:
Foundations, Structures
Eurocode 2: Design of
and Paving, No.0504.05-
concrete structure
ES-40

1.4 MAJOR MATERIAL

Classification and engineering properties of major material to be


used for this building structure are listed below :

Concrete fc' = 35Mpa (cube fc' = 37 Mpa (cube


strength) = 28 Mpa strength) = 30 Mpa
(cylinder strength) (cylinder strength)

E = 2.625 x 105 kg/cm2 E = 33 Mpa


ϒc = 2400 kg/m3 ϒc = 25 kN/m3

Reinforcing grade SD 40 S275


Steel Bar Fy = 400 N/mm2 fyk = 500 Mpa
E = 2.1 x 106 kg/cm2 E = 210 000 N/mm2
ϒst = 7850 kg/m3 ϒst = 78.5 kN/m3

1.5 BASIC ASSUMPTION

Structure is modeled as moment resisting system ( concrete main


frame ). Concrete frame supports are modeled as fixed supports.

For member design loading combinations refering to ACI 318-95 (American EN 1991.1.1.2002
Concrete Institute)

In the permanent condition, stresses due to external load shall not


more than allowable stresses.
But for temporary condition (combination with wind loading) allowable stresses can EN 1991-1-4:2005
be increased by Eurocode 1: Actions on
33,33%. Structures - Wind actions

4. EXTERNAL LOADING CALCULATION


4.1 DEAD LOAD (D)
EN 1991.1.1.2002
4.2 LIVE LOAD (L)
4.3 WIND LOAD (W) UBC 1997 EN 1991-1-4:2005
4.4 SEISMIC LOAD (V) SNI-1726-2002 EN 1998.1.2004
4.5 COMBINATION OF LOADS STAAD Pro Output EN 1990.2002

5. STRESS ANALYSIS STAAD Pro EN 1992-1-1

6. DEFLECTION CHECK
6.1 BEAM DEFLECTION CHECK STAAD Pro
EN I992.1.1.2004
6.2 COLUMN DEFLECTION CHECK STAAD Pro

7. DESIGN OF REINFORCEMENT STAAD Pro EN I992.1.1.2004


7.1 BEAM DESIGN STAAD Pro EN I992.1.1.2005
7.2 COLUMN DESIGN STAAD Pro EN I992.1.1.2006
7.3 ROOF/FLOOR SLAB DESIGN STAAD Pro EN I992.1.1.2007

8. FOUNDATION DESIGN Specification specified EN 1997: Eurocode 7:


by client Geotechnical design

You might also like