Scribd
Upload
282 views

Frame Sensor and Actuator Module (SCH), Component Description PDF

The frame sensor and actuator module (SCH) (A8) is located in the right rear vehicle frame. It performs tasks such as actuating and monitoring taillamps, license plate lamps, position lamps, side marker lamps, and 7 and 15-pin trailer sockets. It also reads signals from brake wear sensors, the parking brake switch, rear axle temperature sensor, dumper indicator pressure switch, fuel level sensor, and interaxle and interwheel differential lock switches. The module is directly connected to the vehicle CAN and redundantly connected to the Redundancy LIN SCA/SCH.

Uploaded by

rudi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
282 views

Frame Sensor and Actuator Module (SCH), Component Description PDF

The frame sensor and actuator module (SCH) (A8) is located in the right rear vehicle frame. It performs tasks such as actuating and monitoring taillamps, license plate lamps, position lamps, side marker lamps, and 7 and 15-pin trailer sockets. It also reads signals from brake wear sensors, the parking brake switch, rear axle temperature sensor, dumper indicator pressure switch, fuel level sensor, and interaxle and interwheel differential lock switches. The module is directly connected to the vehicle CAN and redundantly connected to the Redundancy LIN SCA/SCH.

Uploaded by

rudi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

GF54.21-W-0008H Frame sensor and actuator module (SCH), component description 29.6.

11
MODEL 963, 964

Location

A8 Frame sensor and actuator module (SCH)

The frame sensor and actuator module (SCH) (A8) in right rear
vehicle frame.

W54.21-1417-11

General

The frame sensor and actuator module (SCH) (A8) is directly


connected to the
vehicle CAN (CAN 1) and redundantly connected to the
Redundancy LIN SCA/SCH (LIN 6)
. It performs subfunctions of the familiar rear module from model 930
to 934.

Task

The frame sensor and actuator module (SCH) (A8) essentially


performs the following tasks:
Actuation and monitoring of the Reading in signals of
- taillamps - the brake wear sensors
- license plate lamps - the parking brake switch
- position lamps - the rear axle temperature sensor
- side marker lamps - the dumper indicator pressure switch
- 7 and 15-pin trailer sockets - the fuel level sensor
- the interaxle and interwheel differential lock switches
----------------------------------------------------------------------------------------- -----------------------------------------------------------------------------------------

Emergency mode
The frame sensor and actuator module (SCH) (A8) is connected to
the cab sensor and actuator module (SCH) (A7) via the redundancy
LIN SCA/SCH (LIN 6).

You might also like