Scribd
Upload
643 views

Cab Sensor and Actuator Module (SCA), Component Description

The cab sensor and actuator module (SCA) is located in the electronics compartment on the passenger side of models 963 and 964. It is connected to the interior CAN and redundantly to the frame sensor and actuator module via LIN 6. The main tasks of the SCA are to actuate and monitor turn signals, headlamps, body outline lights, fog lights, and daytime running lamps, taking over some familiar base module functions from prior models while the central gateway control unit now plays a more central networking role. It is also connected redundantly to the frame sensor and actuator module via LIN 6 for emergency mode.

Uploaded by

rudi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
643 views

Cab Sensor and Actuator Module (SCA), Component Description

The cab sensor and actuator module (SCA) is located in the electronics compartment on the passenger side of models 963 and 964. It is connected to the interior CAN and redundantly to the frame sensor and actuator module via LIN 6. The main tasks of the SCA are to actuate and monitor turn signals, headlamps, body outline lights, fog lights, and daytime running lamps, taking over some familiar base module functions from prior models while the central gateway control unit now plays a more central networking role. It is also connected redundantly to the frame sensor and actuator module via LIN 6 for emergency mode.

Uploaded by

rudi
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

GF54.21-W-0007H Cab sensor and actuator module (SCA), component description 29.6.

11
MODEL 963, 964

Location

A7 Cab signal acquisition and actuation module control unit


(SCA)

The cab sensor and actuator module (SCA) (A7) is located in the
electronics compartment on the passenger side.

W54.21-1433-11

General Task

The cab sensor and actuator module (SCA) (A7) is connected The main tasks of the cab sensor and actuator module (SCA) (A7)
to the interior CAN (CAN 2) and redundantly via the are the actuation and monitoring of the:
SCA/SCH redundancy LIN (LIN 6) to the Turn signal lamps
frame sensor and actuator module (SCH) (A8) Headlamps
It performs subfunctions of the familiar base module from model Body outline lights
930 to 934. Fog lights
However, in model 963 and 964, the central role of the networking Daytime running lamps
is moved to the central gateway control unit (CGW) (A2).
-----------------------------------------------------------------------------------------
-----------------------------------------------------------------------------------------

Emergency mode
The cab sensor and actuator module (SCA) (A7) is connected to the
frame sensor and actuator module (SCH) (A8) via the redundancy
LIN SCA/SCH (LIN 6).

You might also like