MA0905-EA

Operation Guide 3196

About This Manual
• Depending on the model of your watch, display text
appears either as dark figures on a light background or
light figures on a dark background. All sample displays
in this manual are shown using dark figures on a light
background.
• Button operations are indicated using the letters shown
in the illustration.
• Each section of this manual provides you with the
information you need to perform operations in each
mode. Further details and technical information can be
found in the “Reference” section.

General Guide
• Press C to change from mode to mode.
• In any mode, press B to illuminate the display for about one second.
• In any mode, hold down C for about two seconds to return to the Timekeeping
Mode.

Timekeeping Mode Alarm Mode Countdown Timer Stopwatch Mode Dual Time Mode
Mode

Press .

Timekeeping Alarm Types

The alarm type is determined by the settings you make, as described below.
Use the Timekeeping Mode to set and view the current
Day of week time and date. • Daily alarm
Month – Day Set the hour and minutes for the alarm time. This type of setting causes the alarm to
To set the time and date sound everyday at the time you set.
1. In the Timekeeping Mode, hold down A until the • Date alarm
seconds start to flash, which indicates the setting Set the month, day, hour and minutes for the alarm time. This type of setting causes
screen. the alarm to sound at the specific time, on the specific date you set.
2. Press C to move the flashing in the sequence shown
below to select other settings. • 1-Month alarm
Set the month, hour and minutes for the alarm time. This type of setting causes the
Seconds Seconds Hour Minutes alarm to sound everyday at time you set, only during the month you set.
Hour : Minutes • Monthly alarm
PM indicator
Day Month Year Set the day, hour and minutes for the alarm time. This type of setting causes the alarm
to sound every month at time you set, on the day you set.
3. When the setting you want to change is flashing, press D to change it as
described below. To set an alarm time
1. In the Alarm Mode, use D to scroll through the alarm
To change this setting Perform this button operation screens until the one whose time you want to set is
Seconds Press D to reset to 00. displayed.
Hour, Minutes, Year, Month, Day Press D to increase the setting.
• Pressing D while the seconds are in the range of 30 to 59 resets them to 00 and
adds 1 to the minutes. In the range of 00 to 29, the minutes are unchanged.
4. Press A to exit the setting screen.
• The day of the week is automatically displayed in accordance with the date (year, • To set a one-time alarm, display one of the screens indicated by an alarm number
month, and day) settings. from 2 through 5. To set the snooze alarm, display the screen indicated by1.
• The year can be set in the range of 2000 to 2099. 2. After you select an alarm, hold down A until the hour setting of the alarm time
• The watch’s built-in full automatic calendar automatically makes allowances for starts to flash, which indicates the setting screen.
different month lengths and leap years. Once you set the date, there should be no • This operation automatically turns on the alarm.
reason to change it except after you have the watch’s battery replaced. 3. Press C to move the flashing in the sequence shown below to select other
settings.
To toggle between 12-hour and 24-hour timekeeping
In the Timekeeping Mode, press D to toggle between 12-hour timekeeping and Hour Minutes Month Day
24-hour timekeeping.
• With the 12-hour format, the P (PM) indicator appears to the left of the hour digits for
times in the range of noon to 11:59 p.m. and no indicator appears to the left of the 4. While a setting is flashing, press D to increase it.
hour digits for times in the range of midnight to 11:59 a.m. • To set an alarm that does not include a month (Daily alarm, Monthly alarm),
• With the 24-hour format, times are displayed in the range of 0:00 to 23:59, without set x for the month. Press D until the x mark appears (between 12 and 1) while
any indicator. month setting is flashing.
• The 12-hour/24-hour timekeeping format you select in the Timekeeping Mode is • To set an alarm that does not include a day (Daily alarm, 1-Month alarm),
applied in all other modes. set xx for the day. Press D until the xx mark appears (between the end of the
month and 1) while the day setting is flashing.
• When setting the alarm time using the 12-hour format, take care to set the time
correctly as a.m. or p.m. (P indicator).
Alarms 5. Press A to exit the setting screen.
You can set up to five independent multi-function alarms Alarm Operation
Alarm date with hour, minutes, month, and day. When an alarm is
(Month – Day) The alarm tone sounds at the preset time for 10 seconds, regardless of the mode the
turned on, the alarm tone sounds when the alarm time is watch is in. In the case of the snooze alarm, the alarm operation is performed a total
reached. One of the alarms can be configured as a of seven times, every five minutes, until you turn the alarm off or change it to a one-
snooze alarm or a one-time alarm, while the other four are time alarm.
one-time alarms. • To stop the alarm tone after it starts to sound, press any button.
You can also turn on an Hourly Time Signal that causes • Performing any one of the following operations during a 5-minute interval between
the watch to beep twice every hour on the hour. snooze alarms cancels the current snooze alarm operation.
• There are five alarms numbered1 through 5. You can Displaying the Timekeeping Mode setting screen
configure Alarm1 as a snooze alarm or a one-time Displaying the alarm1 setting screen
alarm. Alarms 2 through 5 can be used as one-time
Alarm number alarms only. To test the alarm
Alarm time • All of the operations in this section are performed in the In the Alarm Mode, hold down D to sound the alarm.
(Hour : Minutes) Alarm Mode, which you enter by pressing C.

1
 Operation Guide 3196
To turn Alarms 2 through 5 and the Hourly Time Signal on and off To measure times with the stopwatch
1. In the Alarm Mode, use D to select a one-time alarm
(alarm number 2 through 5) or the Hourly Time Signal Elapsed time
(:00).
2. Press A to toggle it on and off.
• The on/off status of Alarms 2 through 5 and the Hourly Start Stop Re-start Stop Clear
Time Signal is shown by indicators along the bottom of Split time
the displays.
• The alarm on indicators and Hourly Time Signal on
Alarm on indicator indicator are displayed in all modes. Start Split Split release Stop Clear
Hourly Time Signal • While an alarm is sounding, the applicable alarm on (SPL displayed)
on indicator indicator flashes on the display.
Two Finishes
To select the operation of Alarm1
1. In the Alarm Mode, use D to select Alarm1.
2. Press A to cycle through the available settings in the sequence shown below. Start Split Stop Split release Clear
First runner Second runner Display time of
Snooze on indicator (SNZ) and Alarm1 on indicator finishes. finishes. second runner.
Display time of
first runner.

One-time Snooze Alarm off

alarm on alarm on
Dual Time
• The snooze on indicator (SNZ) and Alarm1 on indicator are displayed in all modes. The Dual Time Mode lets you keep track of time in a different time zone.
• The snooze on indicator (SNZ) flashes during the 5-minute intervals between • In the Dual Time Mode, the seconds count is synchronized with the seconds count
alarms. of the Timekeeping Mode.
• The alarm indicator (Alarm1 on and/or SNZ) flashes while the alarm is sounding.
To set the Dual Time
1. Press C to enter the Dual Time Mode.
2. In the Dual Time Mode, hold down A until the hour
setting starts to flash, which indicates the setting
Countdown Timer screen.
The countdown timer can be set within a range of 3. Press C to change the selection in the following
one minute to 24 hours. An alarm sounds when the sequence.
countdown reaches zero.
• You can also select auto-repeat, which automatically Seconds Hour Minutes
restarts the countdown from the original value you set Hour : Minutes
whenever zero is reached. 4. Press D to increase the setting.
• All of the operations in this section are performed in the 5. Press A to exit the setting screen.
Seconds Countdown Timer Mode, which you enter by pressing
Minutes C.
Hours
To use the countdown timer Illumination
Press D while in the Countdown Timer Mode to start the
An LED (light-emitting diode) and a light guide panel
countdown timer.
illuminate the entire display for easy reading in the dark.
• When the end of the countdown is reached and auto-repeat is turned off, the alarm • Illumination may be hard to see when viewed under
sounds for 10 seconds or until you stop it by pressing any button. The countdown direct sunlight.
time is automatically reset to its starting value after the alarm stops. • Illumination turns off automatically whenever an alarm
• The countdown timer measurement operation continues even if you exit the sounds.
Countdown Timer Mode. • Frequent use of illumination runs down the battery life.
• Press D while a countdown operation is in progress to pause it. Press D again to
resume the countdown. To illuminate the display
• To completely stop a countdown operation, first pause it (by pressing D), and then In any mode, press B to illuminate the display for about
press A. This returns the countdown time to its starting value. one second.

To set the countdown start time

1. In the Countdown Timer Mode, hold down A until the
hours setting of the countdown start time starts to flash, Reference
which indicates the setting screen.
2. Press C to move the flashing between the hours and This section contains more detailed and technical information about watch operation.
minutes settings. It also contains important precautions and notes about the various features and
3. While a setting is flashing, use D to increase it. functions of this watch.
• To set the starting value of the countdown time to
24 hours, set 0:00. Auto return features
4. Press A to exit the setting screen. If you leave a screen with flashing digits for two or three minutes without performing
any operation, the watch automatically saves any settings you have made up to that
To turn auto-repeat on and off point and exits the setting screen.
1. In the Countdown Timer Mode, hold down A until the
Auto-repeat indicator hours setting of the countdown start time starts to flash, Data and Setting Scrolling
which indicates the setting screen. The D button is used to scroll through setting screen data on the display. Holding
2. Press B to toggle auto-repeat on (A.RPT displayed) down this button during a scroll operation scrolls through the data at high speed.
and off (A.RPT not displayed).
• Note that pressing B in the above operation also turns
on illumination.
• When the end of the countdown is reached while Specifications
auto-repeat is on, the alarm sounds, but the countdown
restarts from the beginning without stopping. You can Accuracy at normal temperature: ±30 seconds a month
stop the countdown by pressing D and manually reset Timekeeping: Hour, minutes, seconds, p.m. (P), month, day, day of the week
to the start time by pressing A. Time system: Switchable between 12-hour and 24-hour formats
• The auto-repeat indicator appears in the Countdown Calendar system: Full Auto-calendar pre-programmed from the year 2000 to 2099
Timer Mode only. Alarms: 5 Multi-function*alarms (Four one-time alarms; one snooze/one-time alarm);
Hourly Time Signal
* Alarm type: Daily alarm, Date alarm, 1-month alarm, Monthly alarm
Countdown Timer
Stopwatch Measuring unit: 1 second
The stopwatch lets you measure elapsed time, split times, Input range: 1 minute to 24 hours (1-minute increments and 1-hour increments)
1/100 second and two finishes. Other: Auto-repeat function
• The display range of the stopwatch is 23 hours, Stopwatch
59 minutes, 59.99 seconds. Measuring unit: 1/100 of a second
• The stopwatch continues to run, restarting from zero Measuring capacity: 23:59' 59.99''
after it reaches its limit, until you stop it. Measuring modes: Elapsed time, split time, two finishes
• The stopwatch measurement operation continues even Dual Time: Hour, minutes, seconds, p.m. (P)
if you exit the Stopwatch Mode.
Illumination: LED (light-emitting diode)
• Exiting the Stopwatch Mode while a split time is frozen
on the display clears the split time and returns to Battery: One lithium battery (Type: CR2025)
Seconds elapsed time measurement. Approximately 10 years on type CR2025 (assuming alarm operation 10 sec./day,
Minutes • All of the operations in this section are performed in the and one illumination operation 1.5 sec./day)
Hours Stopwatch Mode, which you enter by pressing C.