Scribd
Upload
94 views

Quality Engineering

This document contains the questions from a Quality Engineering midterm exam given at the Indian Institute of Technology in Kharagpur. The first question involves analyzing data from two machines that fill plastic bottles to test if they fill to the same average volume. The second question involves analyzing data from a drug study to test if dosage level affects bioactivity. The third question involves analyzing hardness testing data. The fourth question involves obtaining a regression equation to model yield from concentration and temperature data and checking the adequacy of the model.

Uploaded by

brahma2deen2chaudhar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
94 views

Quality Engineering

This document contains the questions from a Quality Engineering midterm exam given at the Indian Institute of Technology in Kharagpur. The first question involves analyzing data from two machines that fill plastic bottles to test if they fill to the same average volume. The second question involves analyzing data from a drug study to test if dosage level affects bioactivity. The third question involves analyzing hardness testing data. The fourth question involves obtaining a regression equation to model yield from concentration and temperature data and checking the adequacy of the model.

Uploaded by

brahma2deen2chaudhar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

-----

INDIAN INSTITUTE OF TECHNOLOGY, KHARAGPUR


Department of Industria! Engineering and Management
Mid Spring Semester Examination, 2013
Subject No: IM31002/61004 Subject Name: Quality Engineering
Full Marks: 60 Time: 2 Hours
Number of Students appearing in the Examination: 73
lns~ructions: Attempt all questions. All questions carry equal marks. Answers should be
short and to the point. Statistical Tables should be used wherever needed.

1. Two machines are used for filling plastic bottles with a net volume of 16.0
ounces. The filling processes can be assumed to be normal, with standard
deviation of o1 = 0.015 and o 2 = 0.018. The quality engineering department
suspects that both machines fill to the same net volume, whether or not this
volume is 16.0 ounces. An experiment is performed by taking a random sample
from the output of each machine.

Machine 1 Machine 2
16.03 16.01 16.02 16.03
16.04 15.96 15.97 16.04
16.05 15.98 15.96 16.02
16.05 16.02 16.01 16.01
16.02 15.99 15.99 16.00

(a) State the hypotheses that should be tested in this experiment.


(b) Test the hypotheses you formulated in part (a). What are your conclusions?
Use a= 0.05.
(c) Find the P-value for this test.
(d) Find a 95 percent confidence interval on the difference in the mean fill
volume for the two machines. [2+5+3+5]

2. A pharmaceutical manufacturer wants to investigate the bioactivity of a new


drug. A completely randomized single-factor experiment was conducted with
three dosage levels, and the following results were obtained.

Dosage Observations
20g 24 28 37 30
30g 37 44 31 35
40g 42 47 52 38

(a) Is there evidence to indicate that dosage level affects bioactivity? Use a =
0.05.
3. Consider the hardness testing (Rockwell C-scale) experiment data shown below.

Coupon (Blocks)
Tip 1 2 3 4
1 9.3 9.4 9.6 10.0
2 9.4. 9.3 9.8 9.9
3 9.2 9.4 9.5 9.7
4 9.7 9.6 10.0 10.2

(a) Analyze the data from this experiment.


(b) Analyze the residuals from this experiment. [10+5=15]

4. The yield of a chemical process is related to the concentration of the reactant


and the operating temperature. An expe.riment ·has been conducted with the
following results.

Yield Concentration Tem12erature


81 1.00 150
89 1.00 180
83 2.00 150
91 2.00 180
- 79 1.00 150
87 1.00 180
84 2.00 150
90 2.00 180

Suppose we write our model in terms of the "usual" coded variables as below.

x 1 = (Concentration- 1.50)/0.50; x2 =(Temperature- 165)/15.

(a) Obtain a regression equation for yield (y) in terms of X1 and x2 coded above.
(b) Check model adequacy and test the parameters. [10+5=15]

***********

You might also like