Scribd
Upload
486 views2 pages

Ecat Breeching Inlet Data Sheet

The document describes 2-way and 4-way breeching inlets that are designed and manufactured according to BS 5041: Part 3: 1975 standards. The inlets use spheroidal graphite iron for the body and gunmetal, copper alloy, bronze, and stainless steel for internal parts. They undergo hydrostatic testing to ensure no leaks and have flange connections of 100mm or 150mm. The inlets have a compact design, excellent flow characteristics, corrosion resistance, and durability. They are Kitemark certified in the UK and SETSCO listed in Singapore.

Uploaded by

Zeeshan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
486 views2 pages

Ecat Breeching Inlet Data Sheet

The document describes 2-way and 4-way breeching inlets that are designed and manufactured according to BS 5041: Part 3: 1975 standards. The inlets use spheroidal graphite iron for the body and gunmetal, copper alloy, bronze, and stainless steel for internal parts. They undergo hydrostatic testing to ensure no leaks and have flange connections of 100mm or 150mm. The inlets have a compact design, excellent flow characteristics, corrosion resistance, and durability. They are Kitemark certified in the UK and SETSCO listed in Singapore.

Uploaded by

Zeeshan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

2-WAY AND 4-WAY BREECHING INLET

GENERAL
“AE” Fig.135 (4-Way) and Fig.136 (2-Way) type breeching inlets
are designed, constructed and manufactured in accordance with
BS 5041 : Part 3 : 1975.

The materials used in the manufacture of the breeching inlets are


in conformity to the standard’s requirement. The body is casted
from spheroidal graphite iron and the inlets are made of BS1400
LG2 gunmetal and copper alloy parts with bronze spring, stainless
steel locknut, washer, etc.,

The internal part of the breeching inlet bodies are coated with
“black” epoxy cold tar paint which is a good anti-corrosion
protection.

The inlet blankcaps are rubber with chrome chain. Brass or


gunmetal blankcaps are also available on request.

The breeching inlets are individually hydrostatically tested on the


body and inlets at 20 bars (approx. 300 PSI) and the non-return
valves are tested to 1.7 bars (approx. 25 PSI) to ensure that no leaks
are evident under such low pressure as required by the standard.

The 2-Way and 4-Way outlet flange connections are 100mm and
150mm PN16 FF (standard) respectively. Other flange connections
eg., BS10 Table 'D' or 'E', ANSI #150 flat-face (FF) or raised-face (RF)
are available upon request.

FEATURES
• Compact and elegant design with excellent flow characteristics.
• High quality casting finishes.
• Corrosion resistant and quality materials used for durability,
long-life and efficiency.
• Maintenance free.

APPROVAL:
• BSI Kitemark KM551498 (UK)
• SETSCO Listed under PLS Class 1A (Singapore).
2-WAY AND 4-WAY BREECHING INLET

* All dimensions shown are in millimetres.


* Due to the improvement in the design and standard, we reserve the right to change the specifications without prior notice.

You might also like