Scribd
Upload
123 views

Power Transformer Typical Values

This document provides specifications for various power transformers ranging in size from 12.5 to 100 MVA. It lists key technical details like frequency, phase number, rated power, voltages, impedances, losses, materials and weights. The transformers can be customized based on customer requirements, and additional features like tertiary windings or different cooling types are available depending on needs.

Uploaded by

Sebastián Michels Alfaro
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
123 views

Power Transformer Typical Values

This document provides specifications for various power transformers ranging in size from 12.5 to 100 MVA. It lists key technical details like frequency, phase number, rated power, voltages, impedances, losses, materials and weights. The transformers can be customized based on customer requirements, and additional features like tertiary windings or different cooling types are available depending on needs.

Uploaded by

Sebastián Michels Alfaro
Copyright
© © All Rights Reserved
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Power transformers

Sr (MVA) Units 12,5 20 31,5 40 50 63 85 100 Notes


Frequency (Hz) 50 50 50 50 50 50 50 50 60 Hz frequency can also be provided on request
Phase number 3 3 3 3 3 3 3 3 Single phase can also be provided on request
Typical rating presented here, however any rating
(MVA) 12,5 20 31,5 40 50 63 85 100
Rated power as per requirement can be provided
Tertiary winding can be provided based on
(MVA) - - - - - - 85
Rated power of tertiary requirement
Power absorbed by that portion of the For ONAN rating power absorbed by cooling
cooling system which is permanently on (kW) 0 0 0 0 0 0 0 0 system is 0. other cooling types can be provided
(normally first stage) based on requirement.
Typical voltages inlcuded here, however other
(kV) 33 66 110 110 110 110 145 27
Rated voltage HV winding voltages based on requirement can be provided
Typical impedances are inlcuded here, however
(%) 8 10 12,5 14 14 14 8/17 9 other impedances based on requirement can be
Short-circuit impedance on the rated tap provided
PEI (%) 99,62 99,66 99,69 99,70 99,72 99,72 99,76 99,74 values to 2 decimal places
Power at which PEI occurs (MVA) 5 7 12 14 17 23 85 100 kPEI x rated power
Typical no load losses are presented here,
(kW) 9 12 18 21 24 32 40 46 however any losses meeting the PEI requirements
No-load loss at rated voltage can be provided
Typical load losses are presented here, however
Load Loss on the main tapping at rated (kW) 62 96 135 175 200 240 238 357 any losses meeting PEI requirements can be
power provided
Core Material Hi-B Hi-B Hi-B Hi-B Hi-B Hi-B Hi-B CGO
Weights are based typical rating data and IEC
(t) 6,5 9 12,5 17 19 23 42 32
Core mass requirements
May also be provided with Al, while fullfilling the
Cu Cu Cu Cu Cu Cu Cu Cu
Conductor material PEI requirements
Weights are based typical rating data and IEC
(t) 3 4 7 8 9 9,5 19,5 12,5 requirements
Conductor mass

You might also like