Scribd
Upload
242 views2 pages

Advantage of Finite Element Method

The finite element method (FEM) allows for the analysis of complex physical properties and geometries. It can handle irregular geometries, various boundary conditions, material properties, and loading types. FEM approximates the problem domain into smaller subdomains, making computations more manageable than other approximate methods. However, FEM requires significant computational time and memory resources. It is best suited for problems where other methods like boundary element are not applicable. Engineering judgment is needed to properly interpret FEM results due to potential for errors.

Uploaded by

Chandu Mahendrakar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
242 views2 pages

Advantage of Finite Element Method

The finite element method (FEM) allows for the analysis of complex physical properties and geometries. It can handle irregular geometries, various boundary conditions, material properties, and loading types. FEM approximates the problem domain into smaller subdomains, making computations more manageable than other approximate methods. However, FEM requires significant computational time and memory resources. It is best suited for problems where other methods like boundary element are not applicable. Engineering judgment is needed to properly interpret FEM results due to potential for errors.

Uploaded by

Chandu Mahendrakar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

Advantages of Finite Element Method:

1. The physical properties which are intractable and complex for any closed bound solution,
can be analysed by this method.
2. It can take care of any geometry ( regular or irregular)
3. It can take care of any boundary conditions.
4. Material anisotropy and non-homogeneity can be catered without much difficulty.
5. It can take care of any type of loading conditions.
6. This method is superior to any other approximate methods like Galerkine and Ray Leigh Ritz
methods.
7. In this method approximations are confined to small sub domains.
8. In this method, admissible functions are valid over the simple domain and have nothing to
do with the boundary, however simple or complex it may be.
9. Enable to computer programming.

Disadvantages of Finite Element Method:

1. Computational time involved in the solution of the problem is high.


2. For fluid mechanics problems, some other methods of analysis may prove efficient than the
FEM.

Limitations of Finite Element Method:

1. Proper engineering judgement is to be exercised to interpret the results.


2. It required large computer memory and computational time to obtain intend results.
3. There are certain categories of problems where other methods are more efficient e.g., fluid
problems having boundaries at infinity are better treated by the boundary element method.
4. For some problem there may be considerable amount of input data. Errors may creep up in
their preparation and the results that obtained may also appear to be acceptable which
indicates deceptive state of affairs. It is always desirable to make a visual check of input data.
5. In the FEM many problems may lead to round off errors. Computer will works with limited
number of digits, may not yield the desirable degree of accuracy or it may give total erroneous
results in some cases. For many problems, the increase in the number of digits for the purpose
of calculation, improve the accuracy.

Basic steps in FEM

1. Discretization of continuum:
2. Identification of variable:
3. Choice of approximation function:
4. Formation of element stiffness matrix:
5. Formation of overall stiffness matrix:
6. Formation of element loading matrix:
7. Formation of overall loading matrix:
8. Incorporation of boundary condition:
9. Solution of simultaneous equations:
10. Calculations of stress and stress resultant:

You might also like