Scribd
Upload
253 views

Piping Spec C Class

This document provides specifications for piping design and materials. Key details include: - Piping shall be designed to ASME B31.3 standards for 600# rating, with 1/16" corrosion allowance, for sweet hydrocarbon service between -20°F and 400°F. - Pipe materials shall be ASTM A-106 Grade B seamless or equivalent. Fittings, flanges, bolting, and gaskets are also specified. - Valve types including ball, check, gate, and globe are specified with material, pressure class, end connections, and description. - Piping shall undergo radiography, hydrotesting, and post weld heat treatment inspection and testing per

Uploaded by

nestor ferrel flores
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
253 views

Piping Spec C Class

This document provides specifications for piping design and materials. Key details include: - Piping shall be designed to ASME B31.3 standards for 600# rating, with 1/16" corrosion allowance, for sweet hydrocarbon service between -20°F and 400°F. - Pipe materials shall be ASTM A-106 Grade B seamless or equivalent. Fittings, flanges, bolting, and gaskets are also specified. - Valve types including ball, check, gate, and globe are specified with material, pressure class, end connections, and description. - Piping shall undergo radiography, hydrotesting, and post weld heat treatment inspection and testing per

Uploaded by

nestor ferrel flores
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Revision: 2

PIPING SPECIFICATION Date:


07/2/28
Piping design shall be in accordance with ASME
Rating: 600# R.F. Corrosion Allowance: 1/16” Class: C
B31.3
Pressure / Temperature Limits (min. –20°F) Service:
Sweet Hydrocarbon Service
Pressure (psi) 1480 1360 1310 1265 Methanol, Glycol, Fuel Gas

Temperature (°F) 100 200 300 400


Diameter ½ ¾ 1 1 1/2 2 3 4 6 8 10 12 14 16 18 20 24
Pipe (NPS)

Sch XH XH XH XH XH XH XH XH XH 80 80 Calculate to Vessel MAWP


(Welded)
Sch (NPT) 160 160 160 160
Material ASTM A-106 Grade B Seamless or Equivalent ASTM A-333 Grade 6
Fittings (4) 3000# A-105N SW or NPT BW fitting (Tee, 45° or 90° BW fitting (Tee, 45° or 90° Elbow,
Elbow, reducers,), A-234- reducers,), A-420-WPL6, schedule to match
WPB, schedule to match piping requirements
piping requirements
Flanges 600# RF X NPT or SW, A- 600# RFWN, A-105N, schedule to match piping requirements
105N, Sch. to match
piping requirements
Bolting Stud Bolts: ASTM A-193-B7; Nuts: ASTM A-194-2H
Gaskets Spiral Wound Non-Asbestos Gasket, 304SS Winding with 1/8” thick Carbon Steel Centering Guide,
Graphoil Filler
Type Size Range Tag No. Rating Ends Description
½” – 1 ½” BA606 600# SW 600# Socket weld Regular Port
½” – 1 ½” BA607 600# SW x NPT 600# Socket weld x Screwed Regular Port
Ball (2,3)
½” – 1 ½” BA608 600# NPT 600# Screwed Regular Port
2” – 3” BA600 600# Raised Face 600#RF Regular Port
4” – 24” BA601 600# Raised Face 600#RF Reg. Port, Gear Operated, Trunnion mount
½” – 1 ½” CH806 800# API SW 800# Socket weld, Ball Check
½” – 1 ½” CH807 800# API SW x NPT 800# Socket weld x Screwed, Ball Check
½” – 1 ½” CH808 800# API NPT 800# Screwed, Ball Check
Check
2” – 6” CH600 600# Raised Face 600# RF Swing
8”-24” CH600 600# Raised Face 600# RF Wafer
Valves (1)

WC
Gate ½” – 1 ½” GA806 800# API SW 800# Socket weld, Bolted Bonnet, OS&Y
½” – 1 ½” GA807 800# API SW x NPT 800# SW x NPT, Bolted Bonnet, OS&Y
½” – 1 ½” GA808 800# API NPT 800# Screwed, Bolted Bonnet, OS&Y
2” – 6” GA600 600# Raised Face 600# RF, Bolted Bonnet, OS&Y
8” – 24” GA601 600# Raised Face 600#RF, Bolted Bonnet, OS&Y, Gear Operated
Globe ½” – 1 ½” GL806 800# API SW 800# Socket weld, Bolted Bonnet, OS&Y
½” – 1 ½” GL807 800# API SW x NPT 800# SW x NPT, Bolted Bonnet, OS&Y
½” – 1 ½” GL808 800# API NPT 800# Screwed, Bolted Bonnet, OS&Y
2” – 4” GL600 600# Raised Face 600# RF Bolted Bonnet, OS&Y
6” – 24” GL601 600# Raised Face 600# RF Bolted Bonnet, OS&Y, Gear Operated
Needle ¼”-3/4” NE1508 6000# NPT
Testing and Radiography: 10% of circumferential butt welds shall be 100% X-Rayed in compliance with ASME B31.3
Inspection Hydrotesting: Per ASME B31.3: Butt weld piping shall be tested at 1.5 x MAWP for a minimum of 10
minutes, small bore SW or threaded piping is leak tested to 100 psi with air.
Post Weld Heat Treatment: Not required below 14”
Additional testing as required by Client Specifications
Notes: 1. Valve body material to be A-105 or A-216,
2. Ball valves not recommended above 200°F, use gate valves.
3. Full port valves to be designated by FP after tag number.
4. See Table A-01 for piping system branch connection.

You might also like