ECAN Pro
USB to CAN adapter
User Manual
Ver.：V3.01 （2015/04/22）
SHENYANG GUANGCHENG TECHNOLOGY CO.,LTD. ECAN Pro
Revision History:
Ver. Date Reason
V1.00 2013/6/16 Create document
V2.01 2013/12/20 Fixed working parameters
V3.01 2015/04/22 Add some parameters
User Manual Shenyang Guangcheng Technology CO.LTD.
2
SHENYANG GUANGCHENG TECHNOLOGY CO.,LTD. ECAN Pro
Index
Index...............................................................................................................................3
1. Introduction................................................................................................................ 4
1.1 Functional Overview........................................................................................ 4
1.2 Properties at a Glance.......................................................................................4
1.3 Typical application........................................................................................... 4
2. Installation..................................................................................................................5
2.1 Driver and software installation....................................................................... 5
2.2 Connect to PC...................................................................................................5
2.3 Connect to CAN-Bus....................................................................................... 5
3. Adapter in use.............................................................................................................6
3.1 Connect to USB................................................................................................6
3.2 Connect to CAN............................................................................................... 6
3.3 CAN-Bus terminal resistance...........................................................................6
3.4 System LED..................................................................................................... 7
4. ECAN Tools introduction.......................................................................................... 8
4.1 Start.................................................................................................................. 8
4.2 Transmit/Receive data...................................................................................... 8
4.3 CAN-Bus diagnosis function........................................................................... 9
4.4 Statistics mode..................................................................................................9
4.5 Other functions.................................................................................................9
5. Secondary development........................................................................................... 11
6. Technical Specifications.......................................................................................... 12
Appendix: CAN2.0B frame format..............................................................................13
Sales and Service..........................................................................................................15
User Manual Shenyang Guangcheng Technology CO.LTD.
3
SHENYANG GUANGCHENG TECHNOLOGY CO.,LTD. ECAN Pro
1. Introduction
1.1 Functional Overview
ECAN Pro adapter is a debugging or analysis tool with one CAN-Bus channel. This
adapter is development for portable use. Using this adapter, PC can easily connect to
CAN-Bus network through USB interface, and become a intelligent node of
CAN-Bus to transmit/receive CAN-Bus data.
Adapter comes with isolation, and can be used in different Windows systems. Device
driver, software and programming interfaces(VC, VB, Net, Delphi, Labview,
C++Builder) exist for different operating systems, so programs can easily access a
connected CAN bus.
1.2 Properties at a Glance
Adapter for USB connection (USB 1.1, USB 2.0, USB3.0)
USB Power supply: DC 5V
Baud rate up to 1 Mbit/s. Time stamp resolution: 1μs
Support CAN2.0A (11-Bit) and CAN2.0B (29-Bit)
CAN-Bus interface: DB9
NXP SJA1000 CAN controller
NXP PCA82C251 CAN transceiver
Support ECAN Tools software
Galvanic isolation on the CAN connection up to 1500 V
Extended operating temperature range from -40 to 85 °C
Device driver and software support Windows, Linux
Dimensions: (L)88mm * (W)50mm * (H)20mm
1.3 Typical application
Test CAN-Bus network or device
CAN-Bus bootloader development
Automotive data decoding tool
Electrical system communication test
Analysis of vehicle fault diagnosis
ECU data simulation
Listen all CAN-Bus communication
User Manual Shenyang Guangcheng Technology CO.LTD.
4
SHENYANG GUANGCHENG TECHNOLOGY CO.,LTD. ECAN Pro
2. Installation
This chapter describes how to connect the USB-CAN adapter to the computer and the
precautions when connecting the USB-CAN adapter to the computer for the first time.
2.1 Driver and software installation
Note: Before install the driver or software, please ensure that the user login
Windows/Linux account is administrator, or the user account has to install the driver
and software related permissions, otherwise it may lead to the installation failed.
2.1.1 Install driver and software
ECAN Tools has been integrated hardware driver installation program, users can
directly install ECAN Tools.
If you only need to install the driver, please enter the “driver” folder, select the
installation file that corresponds to the system type. (“DriverSetup.exe” for 32-bit.
“DriverSetup64.exe” for 64-bit)
2.1.2 Uninstall driver and software
Users can run the DriverSetup.exe/DriverSetup64.exe and click "Uninstall" button to
uninstall the installed device driver.
2.2 Connect to PC
The adapter can be connected to a PC directly, if the USB power supply is insufficient,
you need to use external power supply.
2.2.1 USB power supply mode
USB power supply mode is suitable for the most applications, such as: when ECAN
Pro is the only device in USB port.
2.2.2 External power supply mode (only the USBCAN-II Pro support)
External power supply mode is suitable for the USB port using an USB HUB and
have already connect multiple USB device, this will lead to the adapter lack
of electricity supply.
2.3 Connect to CAN-Bus
ECAN Pro has one DB9 interface for CAN. DB9 pin definition as Table 2.1 below.
Pin Prot Name Function
1 +5V +5V power supply(optional)
2 CAN_L CAN_L signal line
3/6 CAN CAN_G CAN_GND
7 CAN_H CAN_H signal line
Others NC Not connect
Table 2.1 ECAN Pro adapter pin definition
Note: In practical use, most of the time just connected the CAN_H to CAN_H
and CAN_L connected to CAN_L then communication can be realized
User Manual Shenyang Guangcheng Technology CO.LTD.
5
SHENYANG GUANGCHENG TECHNOLOGY CO.,LTD. ECAN Pro
3. Adapter in use
3.1 Connect to USB
ECAN Pro adapter support USB 1.1, USB 2.0, USB3.0.
When driver and software have been installed, connect the adapter to the USB
interface, a new USBCAN device named "GC - Tech USBCAN Device" can be found
in the PC Device manager. If there is no “!” or ”?” mark that the device run fine.
3.2 Connect to CAN
ECAN Pro adapter connect to CAN-Bus as chapter 2.3, CAN_H to CAN_H,CAN_L
to CAN_L.
The CAN bus network adopts topological structure, only the two furthest terminal
need to connect 120Ω terminal resistance between CAN_H and CAN_L. For branch
connection, its length should not be more than 3m. CAN-bus nodes connection as
shown in figure 3.1
Figure 3.1 CAN-bus network
Note: the CAN-bus cable can use twisted-pair cable, shielded twisted-pair cable.
Theory of the maximum communication distance depends on the bus baud rate,
Their relationship as shown in the Table 3.1.
Baud rate Distance
1 Mbit/s 40m
500 kbit/s 110m
250 kbit/s 240m
125 kbit/s 500m
50 kbit/s 1.3km
20 kbit/s 3.3km
10 kbit/s 6.6km
5 kbit/s 13km
Table 3.1 relationship of baud rate and distance
3.3 CAN-Bus terminal resistance
In order to improving the communication reliability and eliminating CAN-bus
terminal reflection, the two furthest terminal need to connect terminal resistance
User Manual Shenyang Guangcheng Technology CO.LTD.
6
SHENYANG GUANGCHENG TECHNOLOGY CO.,LTD. ECAN Pro
between CAN_H and CAN_L as shown in figure 3.2. Terminal resistance values
determined by the characteristic impedance of the cables. Such as, the characteristic
impedance is 120Ω.
Figure 3.2 ECAN Pro connect to other CAN devices
Note: ECAN Pro adapter has none 120Ω terminal resistance inside(If you want,
we could integrate resistance for you).
3.4 System LED
Indicator status and function are shown in table 3.2 and 3.3.
Indicator Colour State
PWR Green Power indicator
SYS Green System indicator
TX Green CAN transmit indicator
RX Green CAN receive indicator
Table 3.2 USBCAN-I Pro adapter indicator LED
After power on, the four lights are also lit at the same time, then PWR and SYS are
always bright, indicating that the equipment has been working and the system is
initialized.
When computer call the ECAN Pro adapter, SYS will be blinking.
When receive/transmit data on the CAN-Bus, RX and TX will be blinking.
Indicator State Meaning
ON Power supply normal
PWR
OFF Power supply error
ON Standby mode
SYS OFF Initialization error
Blinking USB data transmission
OFF CAN-Bus no data
TX / RX
Blinking CAN-Bus data transmission
Table 3.3 the status of indicator light
User Manual Shenyang Guangcheng Technology CO.LTD.
7
SHENYANG GUANGCHENG TECHNOLOGY CO.,LTD. ECAN Pro
4. ECAN Tools introduction
Users can use ECAN Tools software to receive and transmit data.
4.1 Start
1. If ECAN Tools has been installed, users can directly run it on the desktop.
2. Choose the device type and click "open device", one adapter will shown in the
below.
3. Choose work mode. Software provides three kinds of work mode: normal, listen,
selftest.
Normal: use this mode to transmit or receive data.
Listen: use this mode to receive data only, and don’t send response or clock.
Selftest: use this mode to test if the adapter is working well.
4. Choose baud rate according to the CAN-bus, don’t match will lead to
communication failed.
If you don’t know the baud rate, you can use “automatic identification of baud rate”
function to adapt.
4.2 Transmit/Receive data
Transmitting and receiving is the basic function of ECAN Tools, in this interface,
users can directly see the received CAN data, and sent the data to CAN-bus.
User Manual Shenyang Guangcheng Technology CO.LTD.
8
SHENYANG GUANGCHENG TECHNOLOGY CO.,LTD. ECAN Pro
4.3 CAN-Bus diagnosis function
CAN-Bus diagnosis function can detect the bus error frames and bus arbitration lost.
CAN bus status display: indicate the CAN bus status include: bus normal, passive
error, active error、bus hung.
The CAN controller FIFO overflow: message within a certain period of time is too
dense, lead to data loss.
The CAN controller error alarm: when many of errors on the bus, error counter
exceeds the alarm threshold, and display the error count.
The CAN controller negative error: when many of send or receive errors, lead to
the CAN controller into the negative state, and display the error count.
CAN bus controller error: when nodes send or receive errors, error counter value
will be accumulate, and can catch the wrong information, such as ACK, CRC error
and so on.
4.4 Statistics mode
When receiving data, software can classify these data in ID, data, name, format or
type and counting the number of each data.
This function is suitable for large data systems, engineers can easily observe and
analyze other data after same data is combined.
4.5 Other functions
Save data: save the receiving list, save format: txt, can, csv and binary.
User Manual Shenyang Guangcheng Technology CO.LTD.
9
SHENYANG GUANGCHENG TECHNOLOGY CO.,LTD. ECAN Pro
Display mode: scroll mode and list mode, list mode can classified data together
according to the rules.
Filter settings: users can set multi-stage filtering by editing the filter ID.
Data mask: masked ID is not displayed.
Error frames: error frames on the bus can be displayed / hidden.
If you want to know more about the software specific function and usage, please
see the “ECAN Tools software instructions” document.
User Manual Shenyang Guangcheng Technology CO.LTD.
10
SHENYANG GUANGCHENG TECHNOLOGY CO.,LTD. ECAN Pro
5. Secondary development
Provide standard interface function library: ECANVCI.h, ECANVCI.lib,
ECANVCI.dll.
Provide some routine in VC, VB, labview, C#, cb6, delphi7, Double channels C#,
labwindows, Matlab and VBNET.
Please see the "USBCAN Interface Function Library Instruction Manual" in details.
Figure 5.1 The common structure name and function library call processing
User Manual Shenyang Guangcheng Technology CO.LTD.
11
SHENYANG GUANGCHENG TECHNOLOGY CO.,LTD. ECAN Pro
6. Technical Specifications
Connection
PC USB, type A
CAN DB9
Interface
USB USB2.0 full speed, USB 1.1, USB3.0
CAN ISO 11898 standard, support CAN2.0A/B
CAN baud rate 5Kbit/s~1Mbit/s
Isolation 1500V, DC-DC
CAN terminal resister Not integrated, deponding on need
Power
Voltage +5V DC (USB port)
Current 130mA (Max)
Environment
Temperature -40℃~+85℃
Humidness 15%~90%RH, without condensation
EMC test EN 55024:2011-09
EN 55022:2011-12
IP grade IP 20
Basic
Dimension 55mm * 35mm * 14mm, wire 0.9m.
Weight 150g
User Manual Shenyang Guangcheng Technology CO.LTD.
12
SHENYANG GUANGCHENG TECHNOLOGY CO.,LTD. ECAN Pro
Appendix: CAN2.0B frame format
CAN2.0B standard frame
CAN standard frame format is 11 bytes, including two parts: information and data.
The first 3 bytes for information.
Byte 1 for the frame information. Seventh (FF) means the frame format, in the
standard frame, FF = 0; Sixth (RTR) means the type of frame, RTR = 0 means for the
data frame, RTR = 1 for remote frame; DLC means the length of the data.
Byte 2, 3 for the message identifier.
Bytes 4~11 for the data of the data frame, remote frame is invalid.
User Manual Shenyang Guangcheng Technology CO.LTD.
13
SHENYANG GUANGCHENG TECHNOLOGY CO.,LTD. ECAN Pro
CAN2.0B extended frame
CAN extended frame format is 13 bytes, including two parts: information and data.
The first 5 bytes for information.
Byte 1 for the frame information. Seventh (FF) means the frame format, in the
standard frame, FF = 0; Sixth (RTR) means the type of frame, RTR = 0 means for the
data frame, RTR = 1 for remote frame; DLC means the length of the data.
Byte 2~5 for the message identifier.
Bytes 4~11 for the data of the data frame, remote frame is invalid.
User Manual Shenyang Guangcheng Technology CO.LTD.
14
SHENYANG GUANGCHENG TECHNOLOGY CO.,LTD. ECAN Pro
Sales and service
Shenyang Guangcheng Technology Co., Ltd.
Address: Industrial Design Center, No. 42 Chongshan
Middle Road, Huanggu District, Shenyang
City, Liaoning Province.
QQ: 2881884580
E-mail: [email protected]
Tel: +86 17742765166
Website: www1.gcanbox.com
After - sales service telephone Number: +86-13840170070
WeChat Number: 13840170070
User Manual Shenyang Guangcheng Technology CO.LTD.
15
