Helideck Lightning Solutions

When Safety Matters!

Helideck Solutions – When safety matters

Tranberg Helideck Solutions is the

market leader for lightning
solutions on elevated and non-
elevated helidecks.

Tranberg can supply an entire -

maintenance free - helideck
lightning system in full compliance
with CAP437.

 HPDEX-C / HPDEX-H “TD/PM” Circle &  Windsock

Heliport “H” identification lighting system  Wave Off Light
 Floodlights  Control systems
 Perimeter Lights
 Obstruction Lights
Helideck Solutions – When safety matters

 Helideck lighting equipment manufactured by Tranberg

is delivered to offshore installations, floating rigs, oil
tankers, ships, hotels and hospitals - all over the
world.

 Our equipment is used for operation on elevated and

non-elevated helidecks onshore and offshore in
extreme environments.

 Our helideck lighting solution is designed to provide

adequate illumination of the whole area without glare
to pilots or helicopter personnel in the area

 Pilots will have visual awareness of their position

relative to the helidecks at all times.

 Tranberg Helideck Lightning Solution providing the

highest possible safety standards in the industry.
Helideck Solutions – Product Portfolio

 Xenon and LED Flood light ( TEF 9964 and TEF 9970)

 LED Perimeter light ( TEF 2440 and TEF 2430 and TEF 2460)

 HPDEX-C / HPDEX-H “TD/PM” Circle & Heliport “H”

identification lighting system

 Obstruction light

 Illuminated windsock ( TEF 9967 )

 Wave off light ( HeliLed )

 Control system for lights ( Commander )

Product Portfolio - Certifications

Products - CAP437, 7th Ed. compliant Certifications

NEW HPDEX-C / HPDEX-H “TD/PM” ATEX IECEx CSA

Circle&H identification
lighting system  01/15 awaiting IECEX

NEW Perimeter Light TEF 2460   01/15

Perimeter Light TEF 2440 NA NA 

Perimeter Light TEF 2430   
NEW Flood Light LED TEF 9970   In progress

Flood Light Xenon TEF 9964  In progress 

NEW Obstruction Lights TEF 2460   01/15

Illuminated windsock TEF 9967   

Wave off light (HeliLed) 
Control system for lights (Commander) NA NA NA
Protype Installation – Live test, 06/ 2014

Video: https://www.youtube.com/watch?v=zKVoL6Jn0RY

Or

http://www.tranberg.com/
http://www.tranberg.com/our-solutions/helideck-solutions/helideck--
lighting/circle-h-lighting-for-helideck
 Illuminated Circle&H - CAP 437

L3 Calzoni & Tranberg AS launched the latest development of

an illuminated Circle&H system

 Extremely thin light elements and easy to install

 20 mm height allows 5 mm available for installation purposes
 HPDEX-C and HPDEX-H are factory sealed LED lighting elements
 LED board encapsulated and protected from moisture, ambient and operator
handling
 Fast and Easy to install: Minimum impact on helideck surface
 Maintenance Free – No Junction boxes or connections on deck
 Low power consumption
 Temperature range: -30/+50; T6
 High efficiency optical concept
 4 availabe circle sizes:
 cover all D-Values
 Dimming: Two steps STANDARD and BRIGHT
 IP 66
 CAP437, 7th Edition compliant
 ATEX certified, suitable for Zone 1 and 2, Marking: Ex II 2G Ex mb IIC T6 Gb
Illuminated Circle&H – General Design
Illuminated elements:

 Electrical data
 Two circuits: Connected in series
for redundancy, current driven
 Built-in zener diodes for
continuation of circuit
 No junction box or interconnections
required

 Power supply
 A central control panel will feed the
lamps
 Available as non-Ex or for Ex-rated
areas
 Contains multiple drivers that
regulates a steady current for the
lights
 Switch between standard or high
intensity light
Illuminated Circle&H – General Design
Illuminated elements:

Mechanical data

 125 * 20 * 750 mm
 Holds 6 circular lamps
 Molded in thermoplastic
 Friction surface on top cover
 Fixed to a mounting plate
with 6 pcs M6 screws
 Zone 1
Illuminated Circle&H – General Design
Mounting plates:

Mechanical data

 175 * 2 * 750 mm (various shapes, slightly

different measurements)
 Acid proof stainless steel (AISI 316L)
 Multiple choices for fixing to surface:
 Glue
 M8 bolts
 M4.8 blind rivets
 Weld
 Paint, or no paint
 6 welded-on M6 bolts for mounting the
element
 Added vertical supports for lateral forces
Illuminated Circle&H – Heli Pull-Over-Test

Test video: https://www.youtube.com/watch?v=qGDWcIURcAk

Or

http://www.tranberg.com/
http://www.tranberg.com/our-solutions/helideck-
solutions/helideck--lighting/circle-h-lighting-for-helideck
TEF 2460 - LED Dual Color Perimeter Light
Increasing safety
Green color as a regular perimeter light, it has the option of also emitting red light.
The result is a innovative product that acts as a traffic light for flight operations; green
indicate a deck cleared for flight operations, and red the opposite

 Green or Red/Green light

 Zone 1, Zone 2 and Safe area
 Brass housing with integrated Exe junction box
 Glass Dome (heat-strengthened Soda-Lime-Glass)
 Maintenance free
 Easy to install
 Rugged construction
 Lifetime up to 100 000 hrs.
 Instant light
 Encapsulated electronic – no risk of water intrusion to LED and electronics
 Resistance to vibrations
 - 55 ºC to +55 ºC
 IECEx and Atex approved, CAP 437
TEF 2430 - Perimeter Light
 Green perimeter light in Cast Copper Alloy

 SS316L terminal box with a rugged construction

 Lifetime up to 100 000 hrs.

 Easy to install

 Low power consupmtion

 Brass cable glands

 Instant ignition at all temperatures

 Resistant to vibrations

 IP 66/67

 Certified for use in Zone 1 and Zone 2

 -30°C to +50°C

 Complies with: ICAO Annex 14Vol.II and CAP 437

TEF 2440 - Perimeter Light
 Safe Area
 Rugged construction
 Lifetime up to 100 000 hrs.
 Low Power Consumption
 Instant ignition at all Temperatures
 Resistant to vibrations
 Integrated breather / drain plug
 230 VAC 50/60Hz, 120 VAC 50/60Hz, 24 VAC/VDC
 Acid proof stainless steel, Powder coated RAL9002, Globe; Laxan (UV-protected)
 Comply with Brazil NORMAM 01
 Complies with: ICAO Annex 14 Vol. II and CAP 437
TEF 9970 - LED Flood Light
Tranberg floodlights are designed to provide best possible illumination of the
whole area without glare to pilots or helicopter crew in the area

 New LED light source with new lens technology

prevent glare to pilots
 Dimming possibilities
 Made from marine proofed aluminium (Borofloat glass)
 Maintenance free
 Easy to install
 Sealed for life
 Lifetime up to 50 000 hrs.
 Resistant to vibrations
 Input voltage range: 100-277 VAC, 145-380VDC
 -55 ºC to +55 ºC
 IECEx and Atex approved, CAP 437
TEF 9964 - Xenon Flood Light
 Xenon light source with long lamp life

 Solid metal housing/resistant to vibration

 Brass cable glands

 Easy to install and maintain

 Rugged and low profile floodlight in acid resistant stainless steel

SS316L housing

 Proven ingress protection according to EN/IEC 60529, IP66/67

 Supplied to customers world wide

 Certified for use in Zone 1 and Zone 2

 ATEX/CSA: -20°C to +40°C

 Complies with: ICAO Annex 14Vol.II and CAP 437.

TEF 2460 - LED Low intensity Type B
 Obstruction light
 General marking/ warning light
 Zone 1, zone 2 and safe area
 Ex e mb op is IIC T5 Gb

 Hot-forged brass alloy with a Laxan dome

 Integrated terminal box with drain plug/breather
 Maintenance free
 Easy to install
 Rugged construction
 Encapsulated electronics. No risk of water intrusion to LED’s and electronics
 Lifetime up to 100 000 hrs.
 Instant light
 Resistant to vibrations
 Complies with: ICAO Annex 14 Vol. 1 Ch. 6, Low intensity type A or B
 -55°C to +55°C
 IECEx Pre 14.0009, Presafe 14ATEX4571, CAP 437
TEF 9967 - Windsock
 Tranberg illuminated windsock arrangement are all designed for use in
rough environment.
 The windsock is designed to meet the toughest conditions in the
helicopter landing areas.
 Rugged and solid construction.
 Maintenance free
 Easy to install
 4 certified luminaires mounted in SS316 reflector with junction box.
 Windsock to be mounted on top of Ø60,3 mm tube.
 Bearing for rotating the wind cone encapsulated in solid brass housing.
Everything resistant to vibration
 Certified to CAA-UK CAP 437
HeliLed - Wave Off Light
 The system may comprise one or two main status lights each
with a red LED flasher for long life (80,000 hours) and low
maintenance housed in an Exd well glass enclosure.
 Light Source: LED
 IP 66
 A minimum of 700cd between 2 – 10 degrees above the horizon
and 176 cd at all other angles.
 Intensity in dim mode between 16 - 60cd.
 -30 ºC to +60 ºC
 II2GD Ex de IIC T4
 Complies with ICAO Annex 14, Vol 1 App 1 July 2004.
 Certified to CAA-UK CAP 437
Commander Control System
 Control panel system for controlling light on the helideck
 Floodlights – windsock – perimeter lights, Wave Off light
 Panels with backlighting – readable day and night.
 Build in support for NAUT-OSV
 Alarmrel, remote turn off alarm, connection to Central Bridge Alarm
system).
 Build in connection for common alarm, and automatic
monitoring of connected modules
 Possibilities:
 Monitoring and indication on earth-leakage
 Connection of push-button panel on helideck (Ex/non-Ex)
 Controlling of heating on helideck
 Options:
 Integration to external controlsystem
 meets requirement to requirement in NAUT-AW
 Commander Utility delivered in separate modules
 can be delivered mounted on rails or complete in cabinets.
Tranberg - References
Worlds major helideck manufacturers

Marine/Oil&Gas:
New build & Replacement market - worldwide
Customers: Rig owners, Ship owners, Oil Companies
More information www.tranberg.com