Scribd
Upload
1K views1 page

7 Point Container Inspection

• Sample button must be made in laboratory for each new clay batch before taking in production. • Moisture must be checked in laboratory for each new clay batch. • Granulometry test must be performed to measure the size of grains of powder for each new clay batch. • standard parameter must follow as per guidelines

Uploaded by

Akash Pandya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
1K views1 page

7 Point Container Inspection

• Sample button must be made in laboratory for each new clay batch before taking in production. • Moisture must be checked in laboratory for each new clay batch. • Granulometry test must be performed to measure the size of grains of powder for each new clay batch. • standard parameter must follow as per guidelines

Uploaded by

Akash Pandya
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Print Form

7-POINT CONTAINER INSPECTION

This form must be completed in English for all shipments and a copy submitted with the
shipping documents and the original securely affixed to the inside of the container door.

DATE: TIME:

P.O. #:

CONTAINER #:

DESCRIBE UNACCEPTABLE CONDITION


(If there is an unacceptable condition or
unmanifested material, stop the inspection
AREA OF INSPECTION ACCEPTABLE and notify a supervisor.)

OUTSIDE/UNDERCARRIAGE CONDITION □ YES


(support beams should be visible) □ NO

INSIDE/OUTSIDE DOOR CONDITION □ YES


(check locking mechanism to make sure it is □ NO
reliable)

RIGHT SIDE CONDITION □ YES


□ NO

LEFT SIDE CONDITION □ YES


□ NO

FRONT WALL CONDITION □ YES


(make sure blocks and vents are visible) □ NO

CEILING/ROOF CONDITION □ YES


□ NO

INTERIOR FLOOR CONDITION □ YES


□ NO

OTHER COMMENTS:

ITEMS TO LOOK FOR INCLUDE: • FAKE WALLS (USE A HAMMER TO TAP THE WALLS LISTENING FOR
FAKE WALLS OR HOLLOW SOUNDS)
• MAKE SURE INTERIOR SPACE OF THE CONTAINER IS THE PROPER
LENGTH, HEIGHT AND WIDTH
• BONDING MATERIAL
• DIFFERENT COLOR POINTS
• BOLTS INSTEAD OF RIVETS

CONTAINER APPROVED FOR STUFFING: □ YES □ NO

The condition of the container has been visually verified and found to be structurally sound,
weather tight, has no false compartments and contains no unmanifested material.

INSPECTED BY: TIME:

You might also like