Scribd
Upload
109 views2 pages

Jadual Set l3 Itpa

This document outlines the training plan and schedule for three phase drawing and wiring. It includes 8 topics over 27 days: 1. Identification of three phase drawing specifications and requirements. 2. Layout, schematic, and wiring drawings for three phase systems. 3. Installation of three phase earthing systems and distribution boards. 4. Fitting of cables, accessories, and visual inspections. 5. Testing of dead and live circuits and preparation of work reports. It also includes 8 supervisory functions to be carried out over 8 days such as monitoring work progress, staff training, and preparing technical reports.

Uploaded by

Siva 93
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
109 views2 pages

Jadual Set l3 Itpa

This document outlines the training plan and schedule for three phase drawing and wiring. It includes 8 topics over 27 days: 1. Identification of three phase drawing specifications and requirements. 2. Layout, schematic, and wiring drawings for three phase systems. 3. Installation of three phase earthing systems and distribution boards. 4. Fitting of cables, accessories, and visual inspections. 5. Testing of dead and live circuits and preparation of work reports. It also includes 8 supervisory functions to be carried out over 8 days such as monitoring work progress, staff training, and preparing technical reports.

Uploaded by

Siva 93
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 2

COCU L3 27/12/2018 ITPA

COCU WA HOURS RK SET TAJUK


1.Identify three phase 4.8 1,2,3,4,5,6,7,8,9 1/5 PENGENALAN SPESIFIKASI DAN
drawing specifications and 10,11,12,13&14 KEPERLUAN LUKISAN TIGA FASA
requirement
CO 1 2. Carry out layout drawing 6.4 1,2,3,4,5,6,7,8,9 & 2/5
10
THREE PHASE
DRAWING 3. Carry out three line / 6.4 1,2,3,4 & 5 3/5
schematic diagram drawing
4. Carry out three phase 6.4 1,2,3,4,5,6 & 7 4/5
wiring drawing
5. Inspect three phase 4.8 1,2,3,4,5 & 6 5/5
drawing
1.Identify three phase wiring 8.4 1,2,9,10 & 11 1/19 PENGENALAN TATACARA PENDAWAIAN
specifications and procedures 3,4,5,6,7 & 8 TIGA FASA
2/19 PENGENALAN ASAS ELEKTRIK TIGA FASA
2. Identify three phase wiring 8.4 1&2 3/19 PENGENALAN PROSEDUR PENDAWAIAN
tools, equipment and 3&4 TIGA FASA
materials 4/19 PENGENALAN PEMERIKSAAN
PENDAWAIAN TIGA FASA
CO 2
THREE PHASE
3. Carry out wiring activities 19.9 1 5/19 PENGENALAN ALATAN TANGAN
WIRING 2&4 6/19 PENGENALAN PENYEDIAAN
PENDAWAIAN TIGA FASA
3 7/19 SOP PENDAWAIAN TIGA FASA
5 8/19
4. Carry out three phase 11.2 1, 2, & 3 9/19 PENEGNALAN PEMBUMIAN
earthing system installation 4,5,6,7,8 & 9 10/19 PENGENALAN ASAS PEMBUMIAN
5. Carry out three phase 11.2 1,2 & 3 11/19 PENGENALAN PAPAN AGIHAN ELEKTRIK
Distribution Board 12/19
4,5 & 6 PENGENALAN LUKISAN PENDAWAIAN
(DB)(metallic or insulated)
installation
6. Carry out fitting and 11.2 1,2&3 13/19 SISTEM PEMASANGAN ELEKTRIK
accessories installation 4 14/19 PROSEDUR PEMASANGAN KABEL DAN
AKSESORI
7. Carry out wiring system 7 1&3 15/19 PEMERIKSAAN MATA KASAR
visual inspection 2
8. Carry out dead circuit test 4.9 1,2,3 & 4 17/19 PEMERIKSAAN LITAR MATI
9. Carry out live circuit test 5.6 1&2 18/19 PENGENALAN PERANTI ARUS BAKI
10. Prepare single phase 4.2 1,2,3,4, & 5 19/19 PENGENALAN LAPORAN AKTIVITI KERJA
work activities report
1.Monitor work progress 2.34 1,2,3,4 & 5 1/8
2. Conduct section briefing 3.12 1,2,3 & 4 2/8
3. Carry out staff training 3.12 1,2,3,4 & 5 3/8
4. Provide appraisal 3.12 1,2,3 & 4 4/8
accommodation
CO7
5. Implement safety 3.12 1,2,3,4,5 & 6 5/8
SUPERVISORY measures
FUNCTION
6. Carry out customer and 2.34 1,2,3 & 4 6/8
inter departmental liaison
7. Prepare section budget 2.34 1,2,3 & 4 7/8
8. Prepare technical report 2.34 1,2,3,4,5 & 6 8/8

You might also like